Planet GS-4210 SERIES Manuel utilisateur
L2/L4 Managed Gigabit Ethernet Switch
GS-4210 802.3bt PoE++ Series
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Terminal Setup ........................................................................................... 5
3.1 Logging on to the Console.................................................................... 6
3.2 ConguringIPAddressviatheConsole ................................................. 7
3.3 StoringCurrentSwitchConguration..................................................... 9
4. Starting Web Management .........................................................................10
4.1 LoggingintotheManagedSwitch .......................................................10
4.2 SavingCongurationviatheWeb ........................................................13
5. RecoveringBacktoDefaultConguration.....................................................14
6. Customer Support .....................................................................................16
3
1. Package Contents
Thank you for purchasing PLANET L2/L4 Managed Gigabit Ethernet Switch. The
descriptionsofthisseriesareshownbelow:
GS-4210-8HP2T2S
4-port10/100/1000T802.3btPoE+4-port10/100/1000T
802.3atPoE+2-port10/100/1000T+2-port100/1000X
SFPManagedSwitch
GS-4210-8HP2S 2-port10/100/1000T802.3btPoE+6-port10/100/1000T
802.3atPoE+2-port100/1000XSFPManagedSwitch
GS-4210-16UP4C 16-port10/100/1000T802.3btPoE+4-portGigabitTP/SFP
ComboManagedSwitch
GS-4210-24UP4C 24-port10/100/1000T802.3btPoE+4-portGigabitTP/SFP
ComboManagedSwitch
GS-4210-24HP2C
4-port10/100/1000T802.3btPoE+20-port10/100/1000T
802.3atPoE+2-portGigabitTP/SFPComboManaged
Switch
“Managed Switch” mentioned in this Quick Installation Guide refers to the above
models.
Open the box of the Managed Switch and carefully unpack it. The box should
containthefollowingitems:
ModelName
PackageItem
GS-4210-
8HP2T2S
GS-4210-
8HP2S
GS-4210-
16UP4C
GS-4210-
24UP4C
GS-4210-
24HP2C
TheManagedSwitch
QuickInstallation
Guide
RS-232 to RJ45
Console Cable
Rubber Feet
Two Rack-mounting
Bracketswith
AttachmentScrews
PowerCord
SFPDustCaps 22442
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstationsrunningWindows XP/2003/2008/Vista/7/8/10,MACOS Xorlater,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernet NIC(NetworkInterfaceCard)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS-232
converter.
TheaboveWorkstationshavebeeninstalledwith terminal emulator, suchas
HyperTerminalincludedinWindowsXP/2003,puttyorteraterm.
Serial cable--OneendisattachedtotheRS-232serialport,whiletheother
endstotheRJ45typeconsoleportoftheManagedSwitch.
zEthernetPortConnection
Network cables --Usestandardnetwork(UTP)cableswithRJ45connectors.
TheabovePCisinstalledwithWeb browser.
Note
It is recommended to use Internet Explorer 8.0 or above to access
theManagedSwitch.
If the Web interface of the Managed Switch is not accessible,
please turn off the anti-virus software or firewall and then try it
again.
5
3. Terminal Setup
TheManagedSwitchisequipped withaconsoleinterface for localswitchsetupand
maintenance. To congure the system, connect a serial cable to a COM port on a
PCornotebook computerandto theRJ45type oftheconsole portofthe Managed
Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zBaud:115200
zDatabits:8
zParity:None
zStopbits:1
zFlowcontrol:None
6
3.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch and
the terminal will display “running testing procedures”. Then, the following message
asks to log in user name and password. The factory default user name and
passwordareshownasfollows,andtheloginscreeninFigure3-2appears.
Username:admin
Password:admin
Figure 3-2: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
descriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
7
3.2 ConguringIPAddressviatheConsole
TheManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress: 192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
ShowingthecurrentIPaddress
1.Atthe“GS-4210 Series#”prompt,enter“show ip”.
2.Thescreendisplays the currentIPAddress, SubnetMaskand Gatewayas shown
in Figure 3-3.
Figure 3-3: IP Information Screen
8
ConguringIPaddress
3.Atthe“GS-4210 Series#”prompt,enter“congure”.
4.At the “GS-4210 Series(cong)#” prompt, enter the following command and
press <Enter> as shown in Figure 3-4.
GS-4210Series(cong)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210Series(cong)# ip default-gateway 192.168.1.254
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 3-4: IP Address Screen
5.RepeatStep1tocheckiftheIPaddresshaschanged
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the GS-4210
ManagedSwitchSeriesthroughthenewIPaddress.
9
3.3 StoringCurrentSwitchConguration
In the Managed switch, the running conguration le is stored in the RAM. In the
currentversion, therunning congurationsequence ofrunning-cong can besaved
fromthe RAMtoFLASHby writingthe command orcopying the running-cong
startup-cong command, so that the running conguration sequence becomes
thestartupcongurationle,whichisthecongurationsaved.
1.At the “GS-4210 Series#” prompt, enter “copy running-cong startup-
cong” as shown in Figure 3-5.
Figure 3-5: Storing Current Conguration Command Screen
Note
If you are not familiar with console command or the related para-
meter,enter“?”anytimeinconsoletogetthehelpdescription.
10
4. Starting Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is congured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a number
between1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 4-1: IP Management Diagram
4.1 Logging in to the Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
https://192.168.0.100toaccesstheWebinterface.
Autres manuels pour GS-4210 SERIES
2
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Planet Changer
Planet
Planet FGSD-1022 Manuel utilisateur
Planet
Planet SGSW-2402 Manuel utilisateur
Planet
Planet ISW-500 Manuel utilisateur
Planet
Planet XGSW-28040 Manuel utilisateur
Planet
Planet SGSD-1022 Manuel utilisateur
Planet
Planet FGSW-2620CS Manuel utilisateur
Planet
Planet GSW-1601 Manuel utilisateur
Planet
Planet Switch Manuel utilisateur
Planet
Planet WGSW-28040 Manuel utilisateur
Planet
Planet GSW-4804SF Manuel utilisateur
Planet
Planet VC-810S Manuel utilisateur
Planet
Planet uh-400 Manuel utilisateur
Planet
Planet WGSW-28040 Manuel utilisateur
Planet
Planet IKVM-8010 Manuel utilisateur
Planet
Planet POE-152 Manuel utilisateur
Planet
Planet FGSW-2402RS Manuel utilisateur
Planet
Planet HPOE-460 Manuel utilisateur
Planet
Planet EPL-2000 Manuel utilisateur
Planet
Planet GSW-1602SF Manuel utilisateur
Planet
Planet VC-412 Manuel utilisateur
