Planet SGSD-1022 Manuel utilisateur

Management Security Switch

SGSD-1022 / SGSD-1022P

SGSW-2840 / SGSW-2840P

Quick Installation Guide

Table of Contents

1. Package Content.......................................................................................... 3

2. Requirements .............................................................................................. 4

3. Terminal Setup ............................................................................................ 5

4. Logon to the Console ................................................................................... 6

5. Congure IP address.................................................................................... 7

Show the current IP address ....................................................................... 7

Congure IP address................................................................................... 7

6. Start Web Management................................................................................ 9

While IP Address be changed or forgotten admin password – .......................11

Customer Support ....................................................................................12

1. Package Content

Thank you for purchasing PLANET Layer 2 Managed Switch, SGSD-1022 / SGSD-

1022P / SGSW-2840 / SGSW-2840P. Terms of “Managed Switch” means the

Switches mentioned titled in the cover page of this Quick installation guide, i.e.

SGSD-1022, SGSD-1022P, SGSW-2840 and SGSW-2840P.

Open the box of the Managed Switch and carefully unpack it. The box should

contain the following items:

The SGSD / SGSW Managed Switch x 1

User’s manual CD x 1

Quick installation guide x 1

RS232 cable x 1

Rubber feet x 4

Two rack-mounting brackets with attachment screws x 1

Power Cord x 1

If any item is found missing or damaged, please contact your local reseller for

replacement.

2. Requirements

Workstations of subscribers running Windows 98/ME, NT4.0, 2000/XP, MAC OS9

or later, Linux, UNIX or other platform compatible with TCP/IP protocols.

Workstation installed with Ethernet NIC (Network Card)

Serial Port connect (Terminal)

t Above PC with COM Port (DB-9)

Ethernet Port connect

t Network cables - Use standard network (UTP) cables with RJ45 connectors.

t Above PC installed with WEB Browser and JAVA runtime environment Plug-in

Note

It is recommended to use Internet Explore 6.0 or above to access

SGSD / SGSW Managed Switch.

3. Terminal Setup

To congure the system, connect a serial cable to a COM port on a PC or notebook

computer and to serial (console) port of the SGSD / SGSW Managed Switch. The

console port of the SGSD / SGSW Managed Switch is DCE already, so that you can

connect the console port directly through PC without the need of Null Modem.

SGSD / SGSW Managed Switch

RS-232

PC / Workstation

with

Terminal emulation software

Serial Port Serial Port

9600,8,n,1

A terminal program is required to make the software connection to the SGSD /

SGSW Managed Switch. Windows’ Hyper Terminal program may be a good

choice. The Hyper Terminal can be accessed from the Start menu.

1. Click START, then Programs, Accessories and then Hyper Terminal.

2. When the following screen appears, make sure that the COM port should be

congured as:

Baud: 9600

Parity: None

Data bits: 8

Stop bits: 1

Flow Control: None

4. Logon to the Console

Once the terminal has connected to the device, power on the SGSD / SGSW

Managed Switch, the terminal will display that it is running testing procedures.

Then, the following message asks the login user name and password. The factory

default user name and password as following, and the login screen in Figure 4-1

appears.

User name: admin

Password: admin

Figure 4-1 SGSD / SGSW Managed Switch Console Login screen

Note

1. For security reason, please change and memorize the new pass-

word after this first setup.

2. Only accept command in lowercase letter under console inter-

face.

5. Congure IP address

The SGSD / SGSW Managed Switch is shipped with default IP address as following.

IP Address : 192.168.0.100

Subnet Mask : 255.255.255.0

To check the current IP address or modify a new IP address for the Switch, please

use the procedures as follow:

Show the current IP address

1. On “Console#” prompt, enter “show ip interface”.

2. The screen displays the current IP address, Subnet Mask and Gateway. As show

in Figure 5-1.

Figure 5-1 Show IP information screen

Congure IP address

3. On “Console#” prompt, type “congure” to enter the conguration Mode.

4. On “Console (cong)#” prompt, enter the following command and press

<Enter>. As show in Figure 5-2.

Console(cong)# interface vlan 1

Console(cong-if)# ip address 192.168.1.100 255.255.255.0

The previous command would apply the follow settings for the switch.

IP: 192.168.1.100

Subnet Mask: 255.255.255.0

Figure 5-2 Set IP address screen

5. Repeat step 1 to check if the IP address is changed.

If the IP is successfully congured, the Switch will apply the new IP address setting

immediately. You can access the Web interface of SGSD / SGSW Managed Switch

through the new IP address.

Note

If you do not familiar with console command or the related param-

eter, enter “help” anytime in console to get the help description.

6. Start Web Management

The following shows how to start up the Web Management of the SGSD / SGSW

Managed Switch. Note the SGSD / SGSW Managed Switch is congured through an

Ethernet connection, please make sure the manager PC must be set on the same

IP subnet address.

For example, the default IP address of the SGSD / SGSW Managed Switch is

192.168.0.100, then the manager PC should be set at 192.168.0.x (where x

is a number between 1 and 254, except 100), and the default subnet mask is

255.255.255.0.

PLANET Managed Switch

RJ-45 / UTP Cable

PC / Workstation

with

IE Browser

IP Address:

192.168.0.x

IP Address:

192.168.0.100

Figure 6-1 IP Management diagram

1. Use Internet Explorer 6.0 or above Web browser, enter IP address

http://192.168.0.100 (the factory-default IP address or that you have just

changed in console) to access the Web interface.

2. When the following dialog box appears, please enter the default user name

“admin” and password “admin” (or the username/password you have changed

via console). The login screen in Figure 6-2 appears.

Default User name: admin

Default Password: admin

Figure 6-2 Login screen

3. After entering the username and password, the main screen appears as Figure

6-3.

Figure 6-3 Web Main Screen of SGSD / SGSW Managed Switch

4. Now, you can use the Web management interface to continue the Switch

management. The Switch Menu on the left of the Web page let you access

all the commands and statistics the Switch provides. Please refer to the user

manual for more.

Autres manuels pour SGSD-1022

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planet Changer

Planet

Planet FSD-804PS Manuel utilisateur

Planet

Planet VC-820M Manuel utilisateur

Planet

Planet NOVASwitch Series Manuel utilisateur

Planet

Planet WGSW-28040 Manuel utilisateur

Planet

Planet Switch Manuel utilisateur

Planet

Planet FSD-1603 Manuel utilisateur

Planet

Planet LRP-822CS Manuel utilisateur

Planet

Planet IGS-5227-4MP2MT Manuel utilisateur

Planet

Planet KVM-200 Manuel utilisateur

Planet

Planet GSD-604HP Manuel utilisateur

Planet

Planet DSP-1000 Manuel utilisateur

Planet

Planet GSW-1602SF Manuel utilisateur

Planet

Planet WGSW-48040HP Manuel utilisateur

Planet

Planet GSD-1008HP Manuel utilisateur

Planet

Planet FSD-624SF Manuel utilisateur

Planet

Planet IDL-2402 Manuel utilisateur

Planet

Planet GSD-Series Manuel utilisateur

Planet

Planet GSD-805 Manuel utilisateur

Planet

Planet IGS-6325-16P4S Manuel utilisateur

Planet

Planet ISW-800T-M12 Manuel utilisateur

Planet

Planet FGSW-2620CS Manuel utilisateur

Planet

Planet FGSW-2612PVS Manuel utilisateur

Planet

Planet IFGS-1022HPT Manuel utilisateur

Planet

Planet GS-5220-16S8C Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur