Pilz PSSu E F 4DI Manuel utilisateur

PSSu E F 4DI(-T)(-R)

Operating Manual-21310-EN-08

}Decentralised system PSSuniversal I/O

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 3

Section 1 Introduction 5

1.1 Validity of documentation 5

1.1.1 Retaining the documentation 5

1.1.2 Terminology: System environment A and B 5

1.2 Definition of symbols 6

Section 2 Overview 7

2.1 Module structure 7

2.2 Module features 7

2.3 Front view 8

Section 3 Safety 10

3.1 Intended use 10

3.2 Safety regulations 11

3.2.1 Use of qualified personnel 11

3.2.2 Warranty and liability 11

3.2.3 Disposal 11

Section 4 Function description 12

4.1 Block diagram 12

4.2 Functions 12

4.3 Integrated protection mechanisms 13

4.4 Reaction times 13

4.5 Configuration 13

4.5.1 PSSu assignment in system environment A 13

4.5.1.1 Addresses in the process image 14

4.5.2 PSSu assignment in system environment B 14

Section 5 Installation 15

5.1 General installation guidelines 15

5.1.1 Dimensions 15

5.2 Installing the base module 16

5.3 Inserting and removing an electronic module 17

5.3.1 Inserting an electronic module 18

5.3.2 Removing an electronic module 19

5.3.3 Changing an electronic module during operation 19

Section 6 Wiring 20

6.1 General wiring guidelines 20

6.1.1 Mechanical connection of the base modules 20

6.2 Terminal configuration 22

6.3 Connecting the module 24

Section 7 Operation 27

7.1 Messages 27

7.2 Display elements 28

7.2.1 Display elements for module diagnostics 28

Contents

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 4

7.2.2 Display elements for input status 28

Section 8 Technical details 29

8.1 Safety characteristic data 32

Section 9 Order reference 34

9.1 Product 34

9.2 Accessories 34

Introduction

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 5

1 Introduction

1.1 Validity of documentation

This documentation is valid for the product types PSSu E F 4DI, PSSu E F 4DI-T and PSSu

E F 4DI-R. It is valid until new documentation is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

1.1.1 Retaining the documentation

This documentation is intended for instruction and should be retained for future reference.

1.1.2 Terminology: System environment A and B

The PSSu system can be used in two different system environments. The module's applic-

ation area is described in the chapter "Intended Use" of the manual.

The distinction is made between

}PSSu in system environment A

}PSSu in system environment B

The distinction is based on the application area of the PSSu system.

PSSu in system environment A may be used in the

}Decentralised system PSSu I/O

}Not in the automation system PSS 4000

PSSu in system environment B may be used in the

}Automation system PSS 4000, e.g. with

– Decentralised system PSSu I/O with SafetyNET p

– Control system PSSu PLC

– Control system PSSu multi

Introduction

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 6

1.2 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 7

2 Overview

2.1 Module structure

A module consists of

}Electronic module and

}Base module with

– Screw terminals or

– Cage clamp terminals

The base modules are the carrier units for the electronic modules and are used to connect

the field wiring. The electronic modules are inserted on to the base modules and determine

the module's function.

Details of the base modules that can be used are available in the chapter entitled “Intended

Use”.

2.2 Module features

The product has the following features:

}4 digital inputs

}2 test pulse outputs, with the option to configure them as:

– Independent test pulse outputs that use different test pulses (periphery supply)

– Outputs with constant voltage (periphery supply)

}LEDs for:

– Switch status of each input

– Module error

}For failsafe applications in system environment A and B

}T-type:

PSSu E F 4DI-T: for increased environmental requirements

}R-type:

PSSu E F 4DI-R: for railway applications

Overview

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 8

2.3 Front view

2111

2212

2313

2414

Err

PSSu E F

4DI

PSSu E F

4DI

312200

000000

001

Legend:

}A: Electronic module

}B: Base module

}1: LED for module diagnostics

}2: Labelling strip with:

– Name of electronic module

– Order Number

– Serial number

– Hardware version number

– 2D code

}3: Labelling strip for the terminal configuration on the base module

}4: Status LEDs

}5: Name of electronic module

}6: Connection level 1

}7: Connection level 2

}8: Connection level 3

Overview

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 9

}9: Connection level 4

}10: Square mounting holes (connection levels 1, 2, 3 and 4)

– With screw to loosen/tighten the screw terminal on base modules with screw termin-

als

– With mechanism to operate the cage clamp on base modules with cage clamp ter-

minals

}11: Round connection holes (connection levels 1, 2, 3 and 4) for connecting the signal

lines

}12: Mounting slot for colour marker to label the connection level (connection levels 1, 2,

3 and 4)

Safety

Operating Manual PSSu E F 4DI(-T)(-R),

21310-EN-08 10

3 Safety

3.1 Intended use

The module may be used for failsafe applications in system environment A and B (automa-

tion system PSS 4000).

The modules PSSu E F 4DI and PSSu E F 4DI-T may be used as a safety components in

accordance with the Lifts Directive 95/16/EC in accordance with the requirements of

EN81-1/2:1998+A3:2009, EN81-20:2015, EN81-50:2015, EN81-22:2014 and

EN115-1:2008+A1:2010.

The programmable safety system should be installed in a protected environment that meets

at least the requirements of pollution degree 2. Example: Protected inside space or control

cabinet with protection class IP54 and corresponding air conditioning.

The module meets the requirements of ENIEC61508 up to SIL 3.

It provides type 1 failsafe inputs in accordance with IEC 61131-2.

The module PSSu E F 4DI-T is suitable for use where there are increased environmental

requirements (see Technical Details).

The module PSSu E F 4DI-R is suitable for use where there are increased environmental

requirements demanded by railway applications (see Technical details).

Intended use includes making the electrical installation EMC-compliant. Please refer to the

guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use

in an industrial environment. It is not suitable for use in a domestic environment, as this can

lead to interference.

The following is deemed improper use in particular:

}Any component, technical or electrical modification to the module

}Use of the module outside the areas described in this manual

}Any use of the module that is not in accordance with the technical details.

INFORMATION

The module is supported by

}PSSuniversal Configurator and PSSuniversal Assistant from Version

1.4.0 (base type, T-type)

}PAS4000 from Version 1.1.1 (base type, T-type)

}PAS4000 from Version 1.5.0 (R-type)

– We recommend that you always use the latest version (download

from www.pilz.com).

The PSSu E F 4DI module may be used in conjunction with the following base modules:

}PSSu BP 1/8 S

}PSSu BP 1/8 C

}PSSu BP 1/12 S

}PSSu BP 1/12 C

Autres manuels pour PSSu E F 4DI

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pilz Unité de contrôle

Pilz

Pilz PSSu E F PS1-T Manuel utilisateur

Pilz

Pilz PDP67 F 4 code Manuel utilisateur

Pilz

Pilz PNOZ ms4p Manuel utilisateur

Pilz

Pilz PSSu E AI SHT2 Manuel utilisateur

Pilz

Pilz PNOZ s11 Manuel utilisateur

Pilz

Pilz PNOZ mc1p Manuel utilisateur

Pilz

Pilz PNOZ mc7p Manuel utilisateur

Pilz

Pilz PIT es Set10u-5ns (AIDA) basic Manuel utilisateur

Pilz

Pilz PSEN ma1.4-51 M12/8-0.15m Manuel utilisateur

Pilz

Pilz PZE X4VP4 Manuel utilisateur

Pilz

Pilz PDP67 F 8DI ION Manuel utilisateur

Pilz

Pilz PIT m3.3p Manuel utilisateur

Pilz

Pilz PNOZ m ES ETH Manuel utilisateur

Pilz

Pilz PSSu E PD Manuel utilisateur

Pilz

Pilz PSSu E F BSW Manuel utilisateur

Pilz

Pilz PNOZ m EF 1MM Manuel utilisateur

Pilz

Pilz PNOZ m EF Multi Link Manuel utilisateur

Pilz

Pilz PNOZ m ES CANopen Manuel utilisateur

Pilz

Pilz PSS Series Manuel utilisateur

Pilz

Pilz PZE 9P Manuel utilisateur

Pilz

Pilz PSS u2 ES 8DI Manuel utilisateur

Pilz

Pilz PZE 7 Manuel utilisateur

Pilz

Pilz PNOZmulti PNOZ mmc3p Manuel utilisateur

Pilz

Pilz PMCtendo SZ Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur