Pickering PXI 40-597 Manuel utilisateur

pickeringtest.com

Issue 4.1 February 2020

40-597 User Manual

PXI 1-Pole 2 Amp BRIC™ Multi-Slot Matrix Module

Page (II) 1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Page (III)

1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Page (IV) 1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy reference should be made to the safety instructions for

provisions of lifting and moving.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Page (V)

1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Mechanical Description .....................................................2.1

Functional Description ......................................................2.1

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options for PXI Modules ..............................4.1

Module Architecture..............................................................4.2

Programming The Module ....................................................4.3

Setting an X-X Connection ...................................................4.4

Using Pickering Drivers in LabVIEW ...................................4.5

Section 5

Connector Information................................................................5.1

Section 6

Trouble Shooting .........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Switching System Test Tools ...............................................7.1

Fuse Replacement.................................................................7.1

Relay Fault Finding ...............................................................7.2

Module Removal From Chassis ...........................................7.12

Card Removal From BRIC.....................................................7.14

Card Replacement.................................................................7.16

CONTENTS

Page (VI) 1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

THIS PAGE INTENTIONALLY BLANK

Page (VII)

1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

Page (VII)

2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the host chassis are populated with blanking plates to prevent access to user I/O

signals that may be present. Blanking panels are available to order from Pickering in a variety of

slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

Not to be used in safety critical circuits, refer to the Pickering Interfaces’ terms & conditions of sale.

This module must not be used for the switching of Mains Circuits. For the switching of voltages up

to the module’s full specication, Secondary Circuit power supplies and the Device Under Test must

be fully isolated from the Mains Circuit and the safety earth.

The host chassis must be correctly installed and be connected to mains or factory safety ground,

please refer to your chassis installation manual.

Diagram Showing Separation Between The Mains Circuit and Secondary Circuit / DUT

For the purposes of this document, a Mains Circuit is an installation classied as Overvoltage

Category II up to 300V. Separation between the Secondary Circuit and Mains Circuit is achieved

by a transformer in which the primary windings are separated from the secondary windings by

reinforced insulation, double insulation, or a screen connected to the protective conductor terminal.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

PXI Switching

Module

Device

Under Test

Power

Supply

Power

Supply

Host Chassis

Secondary Circuit

Mains

Circuit

Mains

Circuit

Mains/Factory

Safety Ground

Page (VIII) 1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

Page (VIII) 2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user I/O

signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Page 1.1

1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

pickeringtest.com

PXI 1-Pole 2 Amp BRIC™ Multi Slot Matrix 40-597

ISSUE 3.0 MAY 2018

40-597-108 256x12 Matrix Switching Diagram (Fully

Populated BRIC8)

The 40-597 supports 12 concurrent switch paths for

X to X (see application diagram overleaf)

Supported by

eBIRST

eBIRST switching system test tools simplify switching system fault-

nding by quickly testing the system and graphically identifying the

faulty relay.

For more information go to: pickeringtest.com/ebirst

The 2 Amp Matrix BRIC is a higher power/voltage

version of Pickering’s established range of PXI

Matrix BRIC modules. It features higher voltage,

current and power handling capability than the

ultra high density reed relay based BRICs. It is

not as suited to switching low level signals, where

Ruthenium Reed Relays are a better choice and

have a very long lifetime of up to 1000 million

operations. For superior low level switching please

refer to our 40-560/561/562 range.

• Very High Density 2A Matrix With Up To

768 Crosspoints Per 2-Slot BRIC,

1536 Crosspoints Per 4-Slot BRIC &

3072 Crosspoints Per 8-Slot BRIC

(384 Crosspoints Per PXI Slot)

• Integrated PXI Module With Built In High

Performance Screened Analog Bus

• 2-Slot Conﬁgurations to 64x12 (1-Pole),

4-Slot Conﬁgurations to 128x12 (1-Pole) &

8-Slot Conﬁgurations to 256x12 (1-Pole)

• Switch up to 100VDC/70VAC, 2A, 60W

• Automatic Analog Bus Isolation Switching

Maximizes Bandwidth and Matrix Reliability

• VISA, IVI & Kernel Drivers Supplied for

Windows

• Supported by PXI or LXI Chassis

• Supported by

eBIRST

™

• 3 Year Warranty

Pickering’s Range of 2A BRIC Matrix Modules

Model No. Poles Y-Bus Size Min. Matrix

Size

Max. Matrix

Size

40-568 1 4 75x4 600x4

40-596 1 6 58x6 464x6

40-567 1 8 44x8 352x8

40-597 1 12 32x12 256x12

40-598 1 16 24x16 192x16

40-566A 24 55x4 385x4

40-565A 28 24x8 192x8

BRIC

™

2nd Generation PXI 2Amp Switch Matrix

The 40-597 PXI Matrix BRIC is a range of high density matrix modules

able to switch up to 2A or 100VDC/70VAC. The 40-597 BRIC modules

are available in 2, 4 or 8-slot sizes to suit most high performance PXI

matrix requirements and are constructed using high quality electro-

mechanical relays for high switching condence.

Typical applications include signal routing for functional ATE systems.

With its high level of switching density, 40-596 modules allow a

complete system to be housed in a single PXI chassis, BRIC modules

allow the use of a much lower cost 8-slot PXI chassis.

X12

X10

X11

X14

X16

X13

X15

X256

X253

X254

X18

X17

X19

MATRIX

CROSSPOINT

High Reliability and Easy of Use

The 40-597 PXI BRIC is designed to minimise the cost and

complexity of cable assemblies to the device under test and

instrumentation. Analog busing is housed within the module using

a high performance screened analog bus backplane. Pickering

can construct custom cable assemblies for all of our PXI modules,

please contact sales ofce for further assistance.

Page 1.2 1-POLE 2A BRIC 3U PXI MULTI-SLOT MATRIX 40-597

pickering

SECTION 1 - TECHNICAL SPECIFICATION

1-Pole 2 Amp BRIC Matrix – 40-597

pickeringtest.com

Overview

Example Application of the 40-597 1-Pole 2A BRIC Matrix

Schematic diagram showing a 256x12 BRIC Matrix being used to parallel test multiple DUTs.

The BRIC Matrix allows tremendous test system ﬂexibility.

X1 X32

X128

MATRIX

CROSSPOINT

x12

X1 X32

X256X1

MATRIX

CROSSPOINT

x12

The 40-597 in BRIC8 Format is Available With Matrix Conﬁgurations Between 32x12 and 256x12

The 40-597 in BRIC4 Format is Available With Matrix

Conﬁgurations Between 32x12 and 128x12

The 40-597 in BRIC2 Format is Available With

Matrix Conﬁgurations of 32x12 and 64x12

X1 X32

X64

x12

MATRIX

CROSSPOINT

Instrument 1

Instrument 2

Instrument 3

Instrument 4

Instrument 5

Device

Under Test

No. 1

Device

Under Test

No. 2

237

254

255

256

Device

Under Test

No. 3

Table des matières

Autres manuels Pickering Unité de contrôle

Pickering

Pickering 40-575 Manuel utilisateur

Pickering

Pickering PXI 30 A Manuel utilisateur

Pickering

Pickering 40-292 Manuel utilisateur

Pickering

Pickering 40-296 Manuel utilisateur

Pickering

Pickering 40-656A Manuel utilisateur

Pickering

Pickering PXI BRIC 40-563A Manuel utilisateur

Pickering

Pickering PXI 40-855 Manuel utilisateur

Pickering

Pickering 40-519A Manuel utilisateur

Pickering

Pickering 40-533B Manuel utilisateur

Pickering

Pickering 4 785C Series Manuel utilisateur

Pickering

Pickering PXI BRIC 40-569B Manuel utilisateur

Pickering

Pickering BRIC 40-565B Manuel utilisateur

Pickering

Pickering 40-565A Manuel utilisateur

Pickering

Pickering 40-280 Manuel utilisateur

Pickering

Pickering PXI 40-785 Manuel utilisateur

Pickering

Pickering SYSTEM 10 Manuel utilisateur

Pickering

Pickering PXI 40-710 Manuel utilisateur

Pickering

Pickering PXI 40-795-001 Manuel utilisateur

Pickering

Pickering 40-170 Manuel utilisateur

Pickering

Pickering 42-724 Manuel utilisateur

Pickering

Pickering 40-262 Manuel utilisateur

Pickering

Pickering SYSTEM 10 Manuel utilisateur

Pickering

Pickering 41-765 Manuel utilisateur

Pickering

Pickering PXI 41-752 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur