PCE Instruments PCE-423N Manuel utilisateur

PCE-423N Heat Wire Anemometer

User Manual

User manuals in various languages (français,

italiano, español, português, nederlands, türk, polski,

русский, 中文) can be found by using our

product search on: www.pce-instruments.com

Last change: 13 December 2022

v1.0

English

 
 © PCE Instruments 
 
 
Contents 
1Safety notes........................................................................................... 1 
2Specifications........................................................................................2 
3Delivery scope.......................................................................................2 
4Device description ................................................................................ 3 
5Switching the meter on and off ...........................................................4 
6Measurement preparation.................................................................... 4 
7Measuring mode.................................................................................... 4 
7.1 Main display..................................................................................................................... 4 
7.2 Average measurement (time-dependent) ......................................................................... 4 
7.3 Average measurement (different points)........................................................................... 5 
8Settings.................................................................................................. 5 
8.1 Set unit............................................................................................................................. 5 
8.2 Flow rate setting............................................................................................................... 5 
8.3 Automatic power off.......................................................................................................... 6 
8.4 View saved data............................................................................................................... 6 
8.5 Display brightness............................................................................................................ 6 
8.6 Date and time................................................................................................................... 6 
8.7 Calibration........................................................................................................................ 7 
9Contact................................................................................................... 7 
10 Disposal ................................................................................................. 7 
 
 
 

1 Safety notes

Please read this manual carefully and completely before you usethe device for the first time. The

device may only be used by qualified personnel and repaired by PCE Instruments personnel.

Damage or injuries caused by non-observance of the manual are excluded from our liability and

not covered by our warranty.

•The device must only be used as described inthis instructionmanual. If used otherwise,

this can cause dangerous situations for the user and damage to the meter.

•The instrument may only be used if the environmental conditions (temperature, relative

humidity, …) are within the ranges stated in the technical specifications. Do not expose

the device to extreme temperatures, direct sunlight, extreme humidity or moisture.

•Do not expose the device to shocks or strong vibrations.

•The case should only be opened by qualified PCE Instruments personnel.

•Never use the instrument when your hands are wet.

•You must not make any technical changes to the device.

•The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,

no abrasives or solvents.

•The device must only be used with accessories from PCE Instruments or equivalent.

•Before each use, inspect the case for visible damage. If any damage is visible, do not

use the device.

•Do not use the instrument in explosive atmospheres.

•The measurement range as stated in the specifications must not be exceeded under

any circumstances.

•Non-observance of the safety notes can cause damage to the device and injuries to

the user.

•Do not touch the hot wire.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

2 Specifications

Velocity

Measurement range

0.00 ... 30.00 m/s

0.0 ... 5905.5 ft/min

Resolution

0.01 m/s

0.1 ft/min

Accuracy*

*the higher value applies

±0.10 m/s or ±5 % of rdg. at 0 ... 5 m/s

±0.30 m/s or ±5 % of rdg. at 5 ... 30 m/s

±19.6 ft/min or ±5 % of rdg. at 0 ... 984.2 ft/min

±59.0 ft/min or ±5 % of rdg. at 984.2 ... 5905.5 ft/min

Flow rate

Measurement range

0.0 ... 339120.0 m3/h

0.0 ... 99598.0 CFM

Resolution

0.1 m3/h

0.1 CFM

Temperature

Measurement range

0 ... 50 °C

32 ... 122 °F

Resolution

0.1 °C

0.1 °F

Accuracy*

±1 °C

±1.8 °F

Further specification

Telescopic probe length

210 ... 426 mm / 8.2 ... 16.7"

Telescopic probe diameter

12 mm / 0.47"

Memory space

10,000 measuring points

File format

CSV

Interface

micro USB

Bracket

3/8" tripod bracket

Display

2" LCD, 176 x 220 pixels

Measurement rate

1 Hz

Power supply

(rechargeable battery)

internal rechargeable 1000 mAh battery

Power supply (external)

5 V DC, 1 A

Operating conditions

0 ... 50 °C (32 ... 122 °F), <85 % RH, non-condensing

Storage conditions

-10 ... 60 °C (14 ... 140 °F), <85 % RH, non-condensing

Dimensions

(without telescopic probe)

145 x 50 x 35 mm / 5.7 x 1.9 x 1.3"

Weight

156 g / 0.34 lbs

3 Delivery scope

1 x hot wire anemometer PCE-423N

1 x micro USB cable

1 x user manual

4 Device description

No.

Meaning / function

flow sensor, temperature sensor

display

left function key

right function key

on / off key

Enter-V/F key, toggle key (velocity, flow rate)

back key

air slits

tripod bracket

micro USB connector

5 Switching the meter on and off

To switch the meter on or off, press and hold the key.

6 Measurement preparation

Before making a measurement, slide the probe guard down. Switch on the device. Point the

opening of the sensor in the direction of the flow to be measured. When you have finished your

measurement, push the guard back up so that the sensor system is not damaged.

7 Measuring mode

7.1 Main display

After the meter has been switched on, the velocity measurement is carried

out immediately. At the same time, the current temperature is measured

and displayed. To select between the velocity and the flow rate

measurement, press and release the enter-V/F key once. The "V" on the

display stands for velocity and the "F" for flow. The flow rate depends on

the velocity and the set area. You can set the area under 8.2 Flow rate

setting to set the area.

Note: Saving individual measured values is not possible in normal

measuring mode:

7.2 Average measurement (time-dependent)

To display the average, press the right function key in measuring mode to

select . The display now shows for the average

reading (time-dependent) and . Now press the left function key to

select . The current velocity, the average, the highest and the

lowest measured value are displayed here. Press the left function key to

save the displayed values . Press the right function key to start or

pause the current average measurement . To repeat the average

measurement, go to normal measurement mode with the back key and

start the average measurement again.

7.3 Average measurement (different points)

To determine the average of different measuring points, press the right

function key in measuring mode.

Press the right function key again to select . To save the

displayed values, now press the left function key . The values

are saved once per keystroke. To include the current measuring point in

the average measurement and select the next one, press the right function

key . To repeat the average measurement, go back to normal

measuring mode with the back key and start the average measurement

again.

8 Settings

To make settings, press the left function key in measuring mode.

Use the function keys to select between the individual functions displayed.

At the same time, you can change selected parameters with the function

keys. To open a setting, press the enter-V/F key. Press the back key to go

back one level. Press the enter-V/F key to confirm your entry.

Setting

Meaning

Unit

Set the unit

Area / Funnel

Enter the dimensions for the flow rate

Auto-off

Set the automatic power off

History

Read memory

Brightness

Show brightness of the display

Date / Time

Set date and time

Calibration

Calibrate flow

8.1 Set unit

To set the unit for the flow and the temperature, go to the Settings menu and to the Unit menu

item. Here, you can select between the temperature or the flow rate. Then you can change the

unit.

Function

Units

Flow rate

m/s, m³/h / ft/min, CFM

Temperature

°C, °F

8.2 Flow rate setting

To specify the dimensions for the flow rate, go to the settings and select the

menu item "Area/Funnel". Here, you can specify four different dimensions

for square as well as round areas. In addition, a cylindrical area can be

specified. The last selected area is adopted in measuring mode.

8.3 Automatic power off

Via the automatic power off function, the meter can be set to switch itself

off after the set time. The following setting options are available here:

"NONE" (function deactivated), 2 minutes, 10 minutes, 1 hour.

8.4 View saved data

To view the saved data, go to the settings and select the item "History". All

saved measurement data can be viewed there. It is not possible to delete

or edit the data on the meter itself.

Note: If no data has been saved, this item cannot be opened.

8.4.1 Transfer data to the computer

To transfer the measurement data to a computer, the meter must first be switched off. Now

connect the meter to a computer which recognises it as a mass data storage device. The data

can now be found in CSV data format.

8.5 Display brightness

To adjust the display brightness, go to the settings and open the item

"Brightness". You can now use the function keys to adjust the brightness

of the display.

8.6 Date and time

To set the date and time, go to the settings and open the menu item

"Data/Time Setup". Here, the date and time can be set in the format

YYYY/MM/DD. You can also choose between English and German style

here. Use the function keys to change the parameters as desired. Use the

enter-V/F key to accept the value and jump to the next item at the same

time.

8.7 Calibration

To calibrate the flow rate, go to the "Calibration" item in the settings. Here,

the displayed measured value can be set using a factor ("Gain"). The

default value is 1.00.

The coefficient range is between 0.5 and 2.

9 Contact

If you have any questions, suggestions or technical problems, please do not hesitate to contact

us. You will find the relevant contact information at the end of this user manual.

10 Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament

applies. Due to the contained pollutants, batteries must not be disposed of as household waste.

They must be given to collection points designed for that purpose.

In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use

them or give them to a recycling company which disposes of the devices in line with law.

For countries outside the EU, batteries and devices should be disposed of in accordance with

your local waste regulations.

If you have any questions, please contact PCE Instruments.

PCE Instruments contact information

Germany France Spain

PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.

Im Langel 26 23, rue de Strasbourg Calle Mayor, 53

D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete)

Deutschland France España

Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel. : +34 967 543 548

Fax: +49 (0) 2903 976 99 29 Numéro de fax: +33 (0) 972 3537 18 Fax: +34 967 543 542

[email protected] [email protected] [email protected]

www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol

United Kingdom Italy Turkey

PCE Instruments UK Ltd PCE Italia s.r.l. PCE Teknik Cihazları Ltd.Şti.

Unit 11 Southpoint Business Park Via Pesciatina 878 / B-Interno 6 Halkalı Merkez Mah.

Ensign Way, Southampton 55010 Loc. Gragnano Pehlivan Sok. No.6/C

Hampshire Capannori (Lucca) 34303 Küçükçekmece - İstanbul

United Kingdom, SO31 4RF Italia Türkiye

Tel: +44 (0) 2380 98703 0 Telefono: +39 0583 975 114 Tel: 0212 471 11 47

Fax: +44 (0) 2380 98703 9 Fax: +39 0583 974 824 Faks: 0212 705 53 93

[email protected] [email protected] [email protected]

www.pce-instruments.com/english www.pce-instruments.com/italiano www.pce-instruments.com/turkish

The Netherlands United States of America Denmark

PCE Brookhuis B.V. PCE Americas Inc. PCE Instruments Denmark ApS

Institutenweg 15 1201 Jupiter Park Drive, Suite 8 Birk Centerpark 40

7521 PH Enschede Jupiter / Palm Beach 7400 Herning

Nederland 33458 FL Denmark

Telefoon: +31 (0)53 737 01 92 USA Tel.: +45 70 30 53 08

[email protected] Tel: +1 (561) 320-9162 [email protected]

www.pce-instruments.com/dutch Fax: +1 (561) 320-9176 www.pce-instruments.com/dansk

[email protected]

www.pce-instruments.com/us

Table des matières

Autres manuels PCE Instruments Instrument de mesure

PCE Instruments

PCE Instruments PCE-MFM 2400 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-VE 400N4 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-900 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-PH 23 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-322-SC43 Manuel utilisateur

PCE Instruments

PCE Instruments PHM 14 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-EM 883 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-320-ICA Manuel utilisateur

PCE Instruments

PCE Instruments PCE-LCT 3 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-HWA 20BT Manuel utilisateur

PCE Instruments

PCE Instruments PCE-JR 911 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-PFM 2 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-AM 45 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-EM 29 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-VA 20 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-VE 1030N Manuel utilisateur

PCE Instruments

PCE Instruments PCE-T 260-ICA Manuel utilisateur

PCE Instruments

PCE Instruments PCE-MSM 4 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-CT 24FN Manuel utilisateur

PCE Instruments

PCE Instruments PCE-CSM 1 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-EM 890 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-GM 75 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TTC 30 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-LDC Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur