ParaBody GS2 Manuel utilisateur
1
LEG PRESS ADAPTER KIT
CLASS H
PART#7358101
REV. A Revision: 11/01/02
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
FOR GS1/GS2 GYM SYSTEM
Version: GS1-LP5A-101
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
NOTE: In a continual effort to improve our products, specifications are subject to change
2002 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Parts list..........................4
Assembly Instructions.....4-13
Insert-Registration Card
©
IMPORTANT NOTES
Please note:
Tools Required for Assembly
* Thank you for purchasing the ParaBody GS1/ GS2 Leg PressAdapter Kit. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* 9/16” wrench
* Ratchet with 9/16” socket
*Adjustable wrench
* Tape measure
3
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OFTHE HEAD OF THE BOLT.
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
PARTS LIST
4
NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM
SYSTEMS
PART #
ACU04-1450
ACU13-0140
ACU06-0024
ACU06-0362
ACUDC1250100020B
ACUDB2E03811000B
ACUDA1E03813416NB
QTY
1
1
7
1
9
14
3
PART #
ACUDA1E03823416NB
ACUDA1E03840016NB
ACUDA1E03843416NB
ACU08-0085
ACU08-0076
ACU08-0079
ACU02-0055
DESCRIPTION
3/8X2-3/4”BOLT
3/8X4” BOLT
3/8X4-3/4”BOLT
STEPSPACER19/32”LG
STEPSPACER1-19/32”LG
STEPSPACER1-11/16”LG
CABLELCLIP
QTY
4
2
5
4
4
2
1
DESCRIPTION
FRONTLEG
LEGPRESSCABLE
3-1/2”PULLEY
2”COVERCAP
3/8”WASHER
3/8”LOCKNUT
3/8X1-3/4”BOLT
KEY
8
9
10
11
12
13
14
KEY
1
2
3
4
5
6
7
FIGURE 1
STEP 1:
• Remove and discard the LEG CABLE by removing the bolts shown in FIGURE 1.
DISCARD!
CABLE
• Remove the bolts attaching the FRAME BRACE and CABLE to the BASE as shown in figure 1
5
0123456
1/2 1/2 1/2 1/2 1/2 1/2
• If not already installed, slide one 2” COVER CAP (4) over the FRONT LEG (1) as shown in FIGURE 8
FIGURE 2
STEP 2:
• SECURELY assemble the FRONT LEG (1) to the GS1/GS2 Gym System using two 3/8 X 4” BOLTS (9), four 3/8” WASHERS
(5),two LOW HEIGHT 3/8”LOCK NUTS (6)asshown in FIGURE2.
9 3/8 X 4”
6
5
1
4
FIGURE 3
STEP 3:
• Assemble the new LEG PRESS CABLE (2) using the previously removed bolts as shown in FIGURE 3. (NOTE: Make sure the
LEG PRESS CABLE is running in the grooves of all pulleys and above the retaining bolts.)
6
2
FIGURE 4
STEP 4:
7
1
6
3
• SECURELY assemble one 3-1/2” PULLEY (3) to the FRONT LEG (1) using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK
NUT (6). See FIGURE 4.
2
7 3/8 X 1-3/4”
0123456
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 5
STEP 5:
8
• SECURELY attach the LP5 LEG PRESS to the FRONT LEG (1) using two 3/8” X 2-3/4” BOLTS (8), two 3/8” WASHERS (5),
and two 3/8” LOCK NUTS (6). See FIGURE 5.
1
6
5
8 3/8 X 2-3/4”
FIGURE 6
STEP 6:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (7), one 3/8” WASHER (5), one CABLE CLIP (14) and
one 3/8” LOCK NUT (6) as shown in FIGURE 6. Make sure the CABLE is in the grooves of all the pulleys.
SEAT FRAME
6
5
2
3
7 3/8 X 1-3/4”
14
BRACKET
9
0123456
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 8
STEP 8:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 8. Make
sure the CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 7
3
2
6
SEAT FRAME
FIGURE 7
STEP 7:
6
SEAT FRAME
• SECURELYattachtheBRACKET(from LP5LEG PRESS) totheSEATFRAME using two3/8” X 4-3/4”BOLTS (10),two 3/8”
WASHERS(5),andtwo 3/8” LOCK NUTS (6). See FIGURE7.
BRACKET
5 10
3/8 LOCKNUT
3/8X 4-3/4”
FIGURE 9
STEP 9:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3) to
the SEATFRAME using one 3/8 X 4-3/4” BOLT (10), two STEPSPACERS 1-19/32” (12) and one 3/8” LOCK NUT (6) as shown in
FIGURE 9. Make sure the CABLE is in the grooves of all the pulleys.
3/8X 4-3/4” 10
3
2
6
12
MAIN ARM
FIGURE 10
STEP 10:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (3) and SECURELY assemble the 3-1/2” PULLEY (3)
to the MAINARM using one 3/8 X 2-3/4” BOLT (8), two STEPSPACERS 19/32” (11) and one 3/8” LOCK NUT(6) as shown in
FIGURE 10. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 8
3
2
6
11
3/8 LOCKNUT
10
SEAT FRAME
Autres manuels pour GS2
2
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels ParaBody Salle de sport à domicile
ParaBody
ParaBody Serious Steel 812102 Manuel utilisateur
ParaBody
ParaBody 950 st Manuel utilisateur
ParaBody
ParaBody 874 Manuel utilisateur
ParaBody
ParaBody 893103 Manuel utilisateur
ParaBody
ParaBody GS6 Manuel utilisateur
ParaBody
ParaBody PBF064 Manuel utilisateur
ParaBody
ParaBody 400102 Manuel utilisateur
ParaBody
ParaBody GS4 Manuel utilisateur
ParaBody
ParaBody 942101 Manuel utilisateur
ParaBody
ParaBody 807 BODY SYSTEM Manuel utilisateur
ParaBody
ParaBody 909101 Manuel utilisateur
ParaBody
ParaBody 841101 Manuel utilisateur
ParaBody
ParaBody GS6 Manuel utilisateur
ParaBody
ParaBody PBF011 Manuel utilisateur
ParaBody
ParaBody 873 Manuel utilisateur
ParaBody
ParaBody 897104 Manuel utilisateur
ParaBody
ParaBody 828104 Manuel utilisateur
ParaBody
ParaBody PBF353 Manuel utilisateur
ParaBody
ParaBody 405 Manuel utilisateur
ParaBody
ParaBody 807 BODYSYSTEM Manuel utilisateur
Manuels Salle de sport à domicile populaires d'autres marques
Horizon Fitness
Horizon Fitness OXFORD 6 Manuel utilisateur
Energetics
Energetics Multi Trainer 5.1 Manuel utilisateur
Matrix
Matrix MG-PL Series Manuel utilisateur
Reebok
Reebok Tbr2i Manuel d'utilisation et d'entretien
Weider
Weider 8300 Hard Drive Manuel utilisateur
Pure Fitness
Pure Fitness 8526HE Manuel utilisateur
