ParaBody 874 Manuel utilisateur
1
874 MULTI-ANGLE BENCH SYSTEM
CLASSH
PART # 7349001
REV.A Revision: 09/24/02
USER’S GUIDE
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 874108
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
j
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
IMPORTANT SAFETY INFORMATION
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Gym Layout.....................4
NOTE: In a continual effort to improve our products, specifications are subject to change
2001 Life Fitness, a division of Brunswick Corporation. All rights reserved.
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
Parts list..........................5
Assembly Instructions.....5-9
General Maintenance.......10
Warranty Statement..........11
Product Services..............12
Insert-Registration Card
©
IMPORTANT NOTES
Please note:
Tools Required forAssembly
* Thank you for purchasing the ParaBody 874 Multi-Angle Bench System. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
3
NOTE:BOLTLENGTHISMEASUREDFROMTHEUNDERSIDEOFTHEHEADOFTHEBOLT.
BOLT LENGTH RULER:
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
Bolt Length Ruler
0123456
1/2 1/2 1/2 1/2 1/2 1/2
BOLT LENGTH
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* Tape measure
1 Square = 1’ X 1’
4
1’ 2’ 3’ 4’ 5’
1’
7’
6’
5’
4’
3’
2’
5
PARTS LIST
PART #
LEA6650609
LEA6650109
LEA6649309
LEA6624210
LEA6624310
LEA6259109
LEA6655709
LEA6654521
LEA6654421
LEA6406401
LEA6412001
LEA6236701
LEA6692601
LEA6405201
LEA7234801
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
QTY
1
1
1
1
1
1
1
1
1
2
1
1
1
1
4
PART #
LEA6145801
LEA3235204
LEA3235212
LEA3114403
LEA3114702
LEA3235315
LEA3235322
LEA3235432
LEA3235501
LEA3221705
LEA6417801
LEA6650201
LEA6416601
LEA7339801
DESCRIPTION
THUMBSCREW
3/8X 1”BOLT
3/8X 3”BOLT
3/8”WASHER
3/8”LOCKNUT
1/2X3-3/4”BOLT
1/2X5-1/2”BOLT
1/2X 8”BOLT
1/2”LOWHEIGHTLOCKNUT
1/2” E-RING
1/2 X 1” SPRING
1/2” FLANGE SPACER
1-1/2 X 3/4” GLIDE (8 PER)
1/2” DIA U-PIN
QTY
1
6
4
14
4
1
1
1
3
1
1
2
1
1
DESCRIPTION
BENCHFRAME
ADJUSTABLESLIDE
ADJUSTABLESLEEVE
LEFTBACKPADANGLE
RIGHTBACKPADANGLE
FRONTBASE
REARBASE
SEAT PAD
BACKPAD
HINGETAB
SPRINGPINASSEMBLY
1-3/4”SQ.ENDCAP
3X 2”END CAP
2”SQ.ENDCAP
2”SQ.COVERCAP
KEY
16
17
18
19
20
21
22
23
24
25
26
27
28
29
FIGURE 1
STEP 1:
• Assemble the 1/2” DIA. U-PIN (29) to the BENCH FRAME (1) using one 1/2 X 1” SPRING (26), and one 1/2” E-RING (25) as
shown in FIGURE 1.
1
16
29
25
26
• Thread one THUMBSCREW (16) into the BENCH FRAME (1) as shown in FIGURE 1. The THUMBSCREW (16) will be used to
tighten down attachments.
6
FIGURE 2
STEP2:
0123456
1/2 1/2 1/2 1/2 1/2 1/2
• SECURELYassemble theFRONTBASE (6)totheBENCH FRAME (1) using two3/8X3” BOLTS (18), four 3/8”WASHERS (19),
andtwo 3/8”LOCK NUTS(20).See FIGURE2.
• Slidefour 2” SQ. COVER CAPS (15) over theends of the FRONT & REAR BASE (6 & 7) as shown in FIGURE 2.
1
6
20
19
19
15
7
19
20 15
19
18 3/8 X 3”
18 3/8 X 3”
• SECURELYassemblethe REAR BASE (7) totheBENCHFRAME (1) using two 3/8 X 3” BOLTS (18), four 3/8”WASHERS (19), and
two3/8”LOCKNUTS(20). SeeFIGURE 2.
7
STEP 3:
FIGURE 3
• Insert one 1-3/4” END CAP(12) into the end of the ADJUSTABLE SLIDE (2) as shown in FIGURE 3.
• Attach eight 3/4 X 1-1/2” GLIDES (28) to the inside of the ADJUSTABLE SLEEVE (3) as shown in FIGURE 3 using the
following steps:
• Thoroughly clean all surfaces where the 3/4 X 1-1/2” GLIDES (28) are to be attached.
• Remove the 3/4 X 1-1/2” GLIDES (28) from the paper backing and firmly apply them to all shown surfaces.
• SECURELYassemble one SPRING PINASSEMBLY(11)to thespringpin barrel ontheADJUSTABLE SLEEVE(3).See FIGURE 3.
• Pullback on theSPRINGPIN (11)andCAREFULLYinsert theADJUSTABLESLIDE (2) intotheADJUSTABLE SLEEVE (3)asshown
inFIGURE3.
• AssembletheADUSTABLESLEEVE(3) tothe BENCHFRAME (1)using one1/2 X3-3/4”BOLT(21),two1/2”FLANGESPACERS(27),
andone 1/2” LOW HEIGHTLOCKNUT (24) as shownin FIGURE 3.
1/2X3-3/4” 21
24 1/2”LOWHEIGHT
27
27
11
2
28
12
1
3
8
STEP 4:
FIGURE 4
0123456
1/2 1/2 1/2 1/2 1/2 1/2
• Assemble the LEFTand RIGHTBACKPADANGLE(4 & 5) and two HINGE TABS (10) to the BENCH FRAME (1) using one 1/2 X 8”
BOLT(23)and one 1/2” LOWHEIGHTLOCKNUT(24) as shown inFIGURE4.
10
1
2
5
4
1/2 X 8” 23
24 1/2”LOWHEIGHT
24 1/2”LOWHEIGHT
22 1/2X5-1/2”
• Assemble the LEFTand RIGHTBACK PADANGLE (4 & 5) to theADJUSTABLESLIDE(2)usingone1/2X5-1/2” BOLT(22)and
one1/2” LOWHEIGHTLOCK NUT (24)as shown inFIGURE4.
9
STEP5:
FIGURE 5
• SECURELYassemble the SEATPAD(8) to theHINGETABS(10)using two3/8X 1” BOLTS(17)and two 3/8”WASHERS(19) as shown
inFIGURE5.
3/8 X 1” 17
19
10
13
14
9
8
4
5
• SECURELYassemblethe BACK PAD (9) to the LEFTBACK PADANGLE (4) andtheRIGHTBACKPADANGLE(5) using four 3/8
X1”BOLTS(17) and four 3/8”WASHERS (19) as shown in FIGURE 5.
ThankyouforpurchasingtheParabody874101MULTI-ANGLEBENCH. If unsureofproperuse of equip-
ment,callyourlocalParabodydistributororcalltheParabodycustomerservicedepartmentat (800)328-9714.
• Slideone 2” SQ. ENDCAP (14) into thetop of the BENCH FRAME(1) as shown in FIGURE5.
• Slideone 3 X 2” END CAP (13) into the frontof the BENCH FRAME (1)as shown in FIGURE 5.
MAINTENANCE
MODEL #________________________
SERIAL #_________________________
DATE OF PURCHASE: _____________
DEALERS NAME: _________________
DEALERS PHONE #_______________
10
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your ParaBody customer service representative
at (800) 328-9714.
* Inspect equipment daily. Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury
Thank you forpurchasing the ParaBody 874 Multi-Angle Bencb System.
Please note:
* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILLBEASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUTYOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.
SERIALNUMBER
LOCATION
Autres manuels pour 874
2
Table des matières
Autres manuels ParaBody Salle de sport à domicile
ParaBody
ParaBody 897104 Manuel utilisateur
ParaBody
ParaBody PBF351 Manuel utilisateur
ParaBody
ParaBody 828104 Manuel utilisateur
ParaBody
ParaBody 920101 Manuel utilisateur
ParaBody
ParaBody 893101 Manuel utilisateur
ParaBody
ParaBody 425104 Manuel utilisateur
ParaBody
ParaBody 216 Manuel utilisateur
ParaBody
ParaBody 58 Manuel utilisateur
ParaBody
ParaBody 828 Manuel utilisateur
ParaBody
ParaBody GS6 Manuel utilisateur
ParaBody
ParaBody cm3 Manuel utilisateur
ParaBody
ParaBody Serious Steel 812102 Manuel utilisateur
ParaBody
ParaBody 360101 Manuel utilisateur
ParaBody
ParaBody PBF005B Manuel utilisateur
ParaBody
ParaBody Parabody 660 Manuel utilisateur
ParaBody
ParaBody 701 Manuel utilisateur
ParaBody
ParaBody PBF410A Manuel utilisateur
ParaBody
ParaBody GS6 Manuel utilisateur
ParaBody
ParaBody 909101 Manuel utilisateur
ParaBody
ParaBody 950 st Manuel utilisateur
Manuels Salle de sport à domicile populaires d'autres marques
Horizon Fitness
Horizon Fitness OXFORD 6 Manuel utilisateur
Energetics
Energetics Multi Trainer 5.1 Manuel utilisateur
Matrix
Matrix MG-PL Series Manuel utilisateur
Reebok
Reebok Tbr2i Manuel d'utilisation et d'entretien
Weider
Weider 8300 Hard Drive Manuel utilisateur
Pure Fitness
Pure Fitness 8526HE Manuel utilisateur
