Panasonic EY46A5 Manuel utilisateur

Unauthorized copying and distribution is a violation

of law.

ORDER NO. PTD1911E07CE

Cordless Multi-Tool

Model No. EY46A5

Europe

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 2

4 Disassembly and Assembly Instructions ---------------- 4

5 Exploded View and Replacement Parts List ------------ 8

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70 °F (30 - 40 °C) higher.

Please use a soldering iron with temperature control and adjust it to 750 ± 20 °F (400 ± 10 °C). In case of using high temperature

soldering iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600 °C).

2 Specifications

3 Troubleshooting Guide

3.1. Troubleshooting Guide

3.2. Trial Operation (after checking Troubleshooting Guide).

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• Check that the frequency adjustment dial can be adjusted from 1 to 6.

• Mount the blade release lever to the main unit, and confirm that the fixing bolt is securely tightened.

• Set the switch to the ON position, and make sure the main unit becomes locked.

3.2.2. Operation

• With the switch (switch lever) set to the ON position, install the battery pack. Check that the indicator lamp for On lock start

prevention function blinks, and confirm that the blade does not operate.

• Check whether the LED lights ON.

• Check if the unit generates heat abnormally in the short period.

• Check that the frequency can be adjusted by turning the frequency adjustment dial.

3.2.3. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

• Check for the presence of any dirt or foreign matter from the repair process on the outside of the tool.

4 Disassembly and Assembly Instructions

* To reduce the risk of injury, always remove battery pack before removing/installing the tool.

* To assemble the tool, start with 8 and proceed to 1.

4.1. Disassembly

1. Remove 4 torx screws.

2. Remove the cover.

Note: (When Assembling)

Pay attention to avoid pinching of lead wires.

3. Remove the read wires and then remove 4 torx screws.

4. Pull out the gear case unit upward.

Note: (When Disassembling)

The rotor assembly is attached to the stator side due to magnetic

force.

Note: (When Assembling)

Apply grease to the inside of the gear case.

5. Remove the rotor assembly.

Note: (When Assembling)

Mount the rotor assembly to the gear case unit, and then install them

to the stator.

6. Remove the fan cover.

Note: (When Assembling)

The protruding part on the fan cover must be placed on lead wire

side.

7. Remove 8 torx screws and take the housing B up vertically.

8. Remove the switch nob and display plate from the housing.

Note: (When Assembling)

Set the frequency adjustment dial at “6”.

4.2. Wiring and Assembly Points

Model No. : EY46A5 Exploded View

5 Exploded View and Replacement Parts List

Model No. : EY46A5 Parts List

Change Safety Ref.

No. Part No. Part Name & Description Q'ty Remarks

1 WEY46A5K3102 HOUSING AB SET 1

2 WEY46A5K3201 BLADE RELEASE LEVER SET 1

3 WEY46A5K3301 DISPLAY PLATE 1

4 WEY46A5K3401 HEAD COVER AB SET 1

5 WEY46A5L0101 FIXING BOLT 1

6 WEY46A5L1201 GEAR CASE UNIT 1

7 WEY46A5L1301 ROTOR ASSEMBLY 1

8 WEY46A5L2101 SWITCH PCB AND STATOR UNIT 1

9 WEY7540L2157 BATTERY TERMINAL BLOCK 1

10 WEY46A5K6201 TORX SCREW 8 (3.5*15), (5PCS/PK)

11 WEY46A5K6301 TORX SCREW 4 (3*14), (5PCS/PK)

12 WEY46A5K6401 TORX SCREW 4 (4*25), (5PCS/PK)

- WEY46A5K8108 OPERATING INSTRUCTIONS 1

- WEY6705X5527 SUNLIGHT GREASE 1

Autres manuels pour EY46A5

Table des matières

Autres manuels Panasonic Outils électriques

Panasonic

Panasonic EY46A5 Manuel utilisateur

Panasonic

Panasonic EY75A8 Manuel utilisateur

Panasonic

Panasonic EY75A8 Manuel utilisateur

Panasonic

Panasonic EYFLA9C Manuel utilisateur

Panasonic

Panasonic EY7549 Manuel utilisateur

Panasonic

Panasonic EYFEA1N Mode d'emploi

Panasonic

Panasonic EY3640 Manuel utilisateur

Panasonic

Panasonic EY4550 Manuel utilisateur

Panasonic

Panasonic EY4550 Manuel utilisateur

Panasonic

Panasonic EY74A2 Manuel utilisateur

Panasonic

Panasonic EY7541 - CORDLESS IMPACT WRENCH Manuel utilisateur

Panasonic

Panasonic EY4541 Manuel utilisateur

Panasonic

Panasonic 7552LJ Manuel utilisateur

Panasonic

Panasonic EY4541 Manuel utilisateur

Panasonic

Panasonic EYFMA1B Manuel utilisateur

Panasonic

Panasonic EYFLC1A Manuel utilisateur

Panasonic

Panasonic EY74A2X Manuel utilisateur

Panasonic

Panasonic EYFME1C Manuel utilisateur

Panasonic

Panasonic EY75A8 Manuel utilisateur

Panasonic

Panasonic AccuPulse QP Low Noise Series Manuel utilisateur

Panasonic

Panasonic EYFLA5A Manuel utilisateur

Panasonic

Panasonic EY4542 - CIRCULAR SAW 14.4V Manuel utilisateur

Panasonic

Panasonic EY3610 Manuel utilisateur

Panasonic

Panasonic EY4541 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel