Panasonic 4541OLOA Manuel utilisateur

© Panasonic Electric Works Co., Ltd. 2008.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number PTD0810X47CE

Cordless Jigsaw

Model No. EY4541

Europe

Oceania

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 5

5 Wiring Connection Diagram ---------------------------------- 9

6 Schematic Diagram ---------------------------------------------- 9

7 Exploded View and Replacement Parts List -----------10

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

(Refer to Wiring Connection Diagram)

4

3.1. Trial Operation (after checking Troubleshooting Guide.)

5

4 Disassembly and Assembly Instructions

4.1. How to Disassemble the Blade.

Ref. No. 1A Procedure 1A Removal of blade.

WARNING:

To reduce the risk of injury, always remove battery pack before

removing/installing the blade.

1. Lift up the blade attach/remove lever.

2. Pull out the blade.

CAUTION:

Be careful to avoid cutting your hands on the blade.

Ref. No. 1B Procedure 1A →1B Removal of base.

1. Use the provided hex wrench to loosen the base fixing screw.

NOTE:

Keep the hex wrench in the storage slot on the tool’s body when not

using it.

2. Remove the hex bolt and base.

6

Ref. No. 1C Procedure 1A →1B →1C Removal of the housing.

1. Loosen 11 housing screws.

2. Hold the housing A and take the housing B up vertically.

Ref. No. 1D Procedure 1A →1B →1C →1D Removal of driving block.

1. Take out the arbor assembly together with the plate spring.

2. Remove the arbor roller.

3. Remove the gear assembly including the gear, weight plate and gear

stand.

7

Ref. No. 1E Procedure 1A →1B →1C →1D →1E Removal of the switch.

1. Pull out the lead wires from the side closed terminal.

(for reassembly)

1. Connect the same color of lead wires (black or red) from switch and

brush assembly with the side closed terminals.

Ref. No. 1F Procedure 1A →1B →1C →1D →1E →1F Removal of the brush assembly.

1. Remove the motor assembly from the housing.

2. Take out the rotor assembly from the stator.

8

Ref. No. 1G Procedure 1A →1B →1C →1D →1E →1F

→1G

Assembly of main unit.

1. Press fit the lead wire firmly.

2. Close the housing A and B.

9

5 Wiring Connection Diagram

6 Schematic Diagram

Model No. : EY4541 Exploded View

7 Exploded View and Replacement Parts List

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels Panasonic Outils électriques

Panasonic

Panasonic EY7549 Manuel utilisateur

Panasonic

Panasonic EY4541X57 Manuel utilisateur

Panasonic

Panasonic EY4541X Manuel utilisateur

Panasonic

Panasonic EY3610 Manuel utilisateur

Panasonic

Panasonic EYFLC1A Manuel utilisateur

Panasonic

Panasonic EY4541 Manuel utilisateur

Panasonic

Panasonic EYFMH1WC Manuel utilisateur

Panasonic

Panasonic EY74A2 Manuel utilisateur

Panasonic

Panasonic EY4550 Manuel utilisateur

Panasonic

Panasonic EY7552X57 Manuel utilisateur

Panasonic

Panasonic EYFLA5A Manuel utilisateur

Panasonic

Panasonic EYFPA1J Manuel utilisateur

Panasonic

Panasonic AccuPulse QP Low Noise Series Manuel utilisateur

Panasonic

Panasonic EY4550 Manuel utilisateur

Panasonic

Panasonic EY7550LR2S Manuel utilisateur

Panasonic

Panasonic EY4541 Manuel utilisateur

Panasonic

Panasonic EYFMA1B Manuel utilisateur

Panasonic

Panasonic EY7440 - DRILL DRIVER 14.4V- MULTI-LANG Manuel utilisateur

Panasonic

Panasonic EY46A5 Manuel utilisateur

Panasonic

Panasonic EY74A2X Manuel utilisateur

Panasonic

Panasonic EY75A8 Manuel utilisateur

Panasonic

Panasonic EY3640 Manuel utilisateur

Panasonic

Panasonic EYFLA4A Manuel utilisateur

Panasonic

Panasonic EYFLA4 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel