Outback RC4340S Manuel utilisateur
Photographs are not to scale.
Specifications subject to change
without prior notice.
Assembly and Operating Instructions for Outback®
Ranger 3S Gas BBQ and Ranger 3 Gas BBQ
WARNING
• For outdoor use only. Not for commercial use.
• Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
• Warning: accessible parts may be very hot. Keep young children and pets away.
• Do not move the appliance during use.
• Turn off the gas supply at the gas bottle after use.
• Any modification of the appliance, misuse, or failure to follow the instructions may be
dangerous and will invalidate your warranty. This does not affect your statutory rights.
• Retain these instructions for future reference.
• Leak test annually, and whenever the gas bottle is removed or replaced. Check that the
hose connections are tight and leak test each time you reconnect the gas bottle.
• For Flare-up control please refer to the ‘OPERATION’ section of this manual.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2. A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.
0359
RC4340S RC4341
2
Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see ‘Hardware Reference Diagram’.
CODE PART QTY Ranger 3S
Gas BBQ
Ranger 3
Gas BBQ
HOOD
A1 Hood (Pre-Assembled to Body) 1
A2 Hood Handle 1
A3 Heat Indicator 1
A4 Warming Rack 1
BODY
B1 Cooking Grill 2
B2 Lava Rock 2
B3 Lava Rock Basket 2
B4 Barbecue Body 1
B5 Knob 3
B6 Control Panel 1
B7 Burner 3
B8 Drip Tray Handle 1
B9 Drip Tray 1
B10 Drip Tray Left Bracket 1
B11 Drip Tray Right Bracket 1
B12 Hose and Regulator Assembly 1
TROLLEY
C1 Side Burner Shelf 1
C2 Side Burner Assembly 1
C3 Side Burner Grid 1
C4 Side Shelf 21
C5 Tool Hook Support 1
C6 Tool Hook 3
C7 Left Front Leg 1
C8 Left Rear Leg 1
C9 Right Front Leg 1
C10 Right Rear Leg 1
C11 Beer Bottle Opener 1
C12 Front Screen 1
C13 Fixing Support 2
C14 Trolley Base 1
C15 Axle 1
C16 Wheel 2
C17 Hubcap 2
HARDWARE
D1 M5x15 Bolt 4
D2 Spacer 4
D3 M5 Nut 4
D4 M6x95 Bolt 8
D5 Washer 8
D6 1/4-20UNCx25 Bolt 16
D7 1/4-20UNCx12 Bolt 8
D8 M6x10 Bolt 2
D9 M6x15 Bolt 4
D10 M6 Nut 4
D11 M4 Step Screw 2
D12 Locknut 2
D13 1/4-20UNCx30 Bolt 8
Pre-Assembled Component
Quantity varies according to model purchased
Appearance, size, and construction may differ according to model purchased
3
Parts Diagrams (Ranger 3S Gas BBQ)
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see hardware pack page.
B1
A4
C7
C15
C17
C8
B12
A1
C11
C12
B4
D12
C4
A3
A2
B2
B3
B5
B6
B7
B8
B9
B10 B11 C4
C9
C13
C14
C5
C6
C10
C16
4
Parts Diagrams (Ranger 3 Gas BBQ)
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see hardware pack page.
B1
A4
C7C8
B12
A1
C12
B4
A3
A2
B2
B3
B5
B6
B7
B8
B9
B10 B11 C4
C9
C13
C14
C17
C1
C2
C3
C11
C5
C6
C10
C16
D12
C15
5
Hardware Reference Diagram (Ranger 3S Gas BBQ)
Specifications subject to change without prior notice.
D1,D2,D3D7
D4,D5
D8
D6
D13
6
Hardware Reference Diagram (Ranger 3 Gas BBQ)
Specifications subject to change without prior notice.
D1,D2,D3
D7
D4,D5
D8
D9,D10
D11
D6
D13
7
2
Assembly
IMPORTANT!
• TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
• The assembly of this barbecue at least requires 2 people.
• Remove any internal components or packaging from the barbecue body.
• Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
• Please read the Important Information section carefully before assembly and use of your
barbecue.
1
Attach the Front Legs (C7, C9), Fixing Support (C13) onto the Trolley Base (C14) by aligning
corresponding holes and fixing with the 1/4-20UNCx30 Bolts (D13x4pcs) as shown.
Ensure Front legs with the hole for assembling Front Screen to them are at the facing
inwards of the barbecue.
Attach the Rear Legs (C8, C10), Fixing Support (C13) onto the Trolley base by aligning
corresponding holes and fixing with the 1/4-20UNCx30 Bolts (D13x4pcs) as shown.
C13
C14
C7 C9
C8 C13 C10
D13
D13
8
4
3
Unscrew the Locknuts (D12x2pcs) from both ends of the Axle (C15). Slide the axle through
the corresponding holes in the left legs. Slide the Wheels (C16) over each end of the axle.
Secure the wheels into place with the locknots. Place the Hubcaps (C17) ont the outsides of
the wheels.
Attach the Front Screen (C12) to the Front Left / Right Legs using 1/4-20UCNx12 Bolts
(D7x6pcs) as shown.
C17 C16
D12 C15
Rear view
C12
D7
9
6
5
Insert M6x95 Bolts (D4x8pcs) through the trolley legs, the Washers (D5x8pcs), and keep the
tip of the bolts inside the washers. While holding the barbecue body into position (2 people
required), screw the bolts into the barbecue body as shown.
CAUTION! Care must be taken to ensure the hood or lid does not fall open
unexpectedly or becomes damaged when it is set on the ground.
Attach Drip Tray Left Bracket (B10) to barbecue body using M5x15 Bolts (D1x2pcs), Spacers
(D2x2pcs) and M5 Nuts (D3x2pcs) as shown. Repeat above process for Drip Tray Right
Bracket (B11).
NOTE: Ensure that the big tabs of the brakets which stop the drip tray are located at the
front of the barbecue.
D5 D4
FRONT
REAR
B10D1 D2 D3
10
Attach the Beer Bottle Opener (C11) to the Right front leg using 1/4-20UNCx12 Bolts (D7x2pcs).
Attach the Tool Hook (C6) to the Tool Hook Support (C5) as shown, Make sure the direction of
tool hook is facing outward. Attach the Tool hook assembly to the Side Shelf (C4) using M6x10
Bolts (D8x2pcs).
Remove the retaining bolts from Drip Tray Handle (B8), and then attach it onto the Drip Tray
(B9) using the retaining bolts.
Insert the Drip Tray by sliding it underneath the barbecue body.
8
7
B8
B9
C11 C5C6 C4
D8
D7
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Outback Gril
Outback
Outback MS4431A Manuel utilisateur
Outback
Outback MS4464 Manuel utilisateur
Outback
Outback Spectrum 2 Burner Manuel utilisateur
Outback
Outback TPA101-2 Guide de référence rapide
Outback
Outback Trooper Stainless Steel Manuel utilisateur
Outback
Outback Meteor 4 MS4431H Manuel utilisateur
Outback
Outback GD4222S-S Manuel utilisateur
Outback
Outback Jupiter 4S Manuel utilisateur
Outback
Outback Excel 100T Manuel utilisateur
Outback
Outback Party Select 6 Burner Gas BBQ FS5680 Manuel utilisateur
Outback
Outback Cook Dome 703 Charcoal Manuel utilisateur
Outback
Outback Hunter Plus 3 Manuel utilisateur
Outback
Outback Omega 100 Manuel utilisateur
Outback
Outback Omega 150 Manuel utilisateur
Outback
Outback Excelsior 3 Manuel utilisateur
Outback
Outback THG2302-3 Manuel utilisateur
Outback
Outback Jupiter 4 Manuel utilisateur
Outback
Outback Phoenix 4 Burner Black Manuel utilisateur
Outback
Outback Society/Granite Manuel utilisateur
Outback
Outback Spectrum TRG3301P Manuel utilisateur
