OPTI-UPS Power PS800B Manuel utilisateur

User’s Guide

Power Series

Models PS500B, PS800B

For your records

The serial number of your UPS is on the rear panel. You should note the

serial number in the space provided below. Retain this booklet as a

permanent record of your purchase to aid in identification in the event of

theft or loss.

Model No:

Serial No.:

Purchase Date:

LIMITED WARRANTY

What the warranty covers:

We warrant this product to be free from defects in material and workmanship

during the warranty period. If a product proves to be defective in material or

workmanship during the warranty period, we will at our sole option repair or

replace the product with a like product.

How long the warranty is effective:

For accurate warranty period and conditions, please contact local branch offices

or your dealers.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or

removed.

2. Damage, deterioration or malfunction resulting from:

a) Accident, misuse, neglect, fire, water, or other acts of nature,

unauthorized product modification, or failure to follow instructions

supplied with the product.

b) Repair or attempted repair by anyone not authorized.

c) The fault is result of accidental damage or damage in transit or

transportation, including but not limited to liquid spillage.

d) Removal or installation of the product.

e) Causes external to the product.

f) Use of supplies or parts not meeting our specifications.

g) Normal wear and tear.

h) Any other cause which does not relate to a product defect.

3. Removal, installation and set-up service charges.

Limitation of implied warranties:

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND

BEYOND THE DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED

WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

Exclusion of damages:

OUR LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF

THE PRODUCT. WE SHALL NOT BE LIABLE FOR:

1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE

PRODUCT*, DAMAGES BASED UPON INCONVENIENCE, LOSS OF

USE OF THE PRODUCT, LOSS OF TIME, LOSS OF PROFITS, LOSS

OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, LOSS OF DATA,

LOSS OF SOFTWARE, COSTS OF SUBSTITUTE EQUIPMENT,

INTERFERENCE WITH BUSINESS RELATIONSHIPS, CLAIMS BY

THIRD PARTIES, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL

OR OTHERWISE.

3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Effect of state law:

This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state. Some states do not allow limitations on implied

warranties and/or do not allow the exclusion of incidental or consequential

damages, so the above limitations and exclusions may not apply to you.

Limitations of Warranty (for Australian States and Territories)

The Trade Practices Act 1974 and corresponding State and Territory Fair Trading

Acts or legalization of another Government (“the relevant acts”) in certain

circumstances imply mandatory conditions and warranties which cannot be

excluded. This warranty is in addition to and not in replacement for such conditions

and warranties. To the extent permitted by the Relevant Acts, in relation to your

product and any other materials provided with the product (“the Goods”) the liability

of Opti Australia under the Relevant Acts is limited, at the option of Opti Australia to:

•Replacement of the Goods; or

•Repair of the Goods; or

•Payment of the cost of replacing the Goods; or

•Payment of the cost of having the Goods repaired.

Opti Australia reserves the right to request proof of purchase upon any warranty

claim.

Life Support:

We do not recommend the use of our UPS products for life support equipment or

direct care where failure of a UPS product could cause failure of, or diminished

effectiveness of the life support equipment or patient care.

EFFECTIVE October 1, 1997

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS !

THIS MANUAL CONTAINS IMPORTANT SAFETY INSTRUCTIONS.

KEEP THIS MANUAL HANDY FOR REFERENCE.

•CAUTION: A BATTERY CAN PRESENT A RISK OF ELECTRICAL SHOCK,

BURNS FROM HIGH SHORT-CIRCUIT CURRENT, FIRE OR EXPLOSION

FROM VENTED GASES. OBSERVE PROPER PRECAUTIONS.

•WHEN REPLACING BATTERIES, USE THE SAME NUMBER AND THE

FOLLOWING TYPE BATTERIES: SEALED LEAD-ACID MAINTENANCE FREE

(PS500B: 12V/4.5AH x2) (PS800B: 12V/5AH x2)

•PROPER DISPOSAL OF BATTERIES IS REQUIRED. REFER TO YOUR

LOCAL CODES FOR DISPOSAL REQUIREMENTS.

CAUTION: !

THE UPS CONTAINS VOLTAGES WHICH ARE POTENTIALLY

HAZARDOUS. ALL REPAIRS SHOULD BE PERFORMED BY

QUALIFIED SERVICE PERSONNEL.

THE UPS HAS ITS OWN INTERNAL ENERGY SOURCE (BATTERY).

THE OUTPUT RECEPTACLES MAY BE ALIVE EVEN WHEN THE UPS

IS NOT CONNECTED TO AN AC SUPPLY.

Safe and continuous operation of the UPS depends partially on the care taken

by users. Please observe the following precautions.

•Do not disassemble the UPS.

•Do not attempt to power the UPS from any receptacle except a 2-pole

3-wire grounded receptacle.

•Do not place the UPS near water or in environments of excessive humility.

•Do not allow liquid or any foreign objects to get inside the UPS.

•Do not block air vents on the side of the UPS.

•Do not plug appliances, such as hair dryers, into the UPS receptacles.

•Do not place the UPS under direct sunshine or close to heat-emitting

sources.

•This UPS is intended for installation in a temperature controlled, indoor

area free of conductive contaminants.

•The socket-outlet shall be installed near the UPS and easily accessible.

•With the installation of the UPS it should be prevented, that the sum of the

leakage current of the UPS and the connected consumer exceeds 3.5mA.

•The battery supply should be disconnected in the plus and minus pole at

the quick connectors of the battery when maintenance or service work

inside the UPS is necessary.

•Do not dispose of batteries in a fire, the battery may explode.

•Do not open or mutilate the battery or batteries, released electrolyte is

harmful to the skin and eyes.

•A battery can present a risk of electric shock and high short circuit current.

The following precaution should be observed when working on batteries

* Remove watches, rings or other metal objects.

* Use tools with insulated handles.

•FEDERAL COMMUNICATIONS COMMISSION (FCC)

WARNING:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC)

This equipment does not exceed Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulation of the

Canadian Department of Communications. Operation in a residential area

may cause Unacceptable interference to radio and TV reception requiring

the owner or operator to take whatever steps are necessary to correct the

interference.

PS500B/PS800B 1

TABLE OF CONTENTS

1. INTRODUCTION

1.1 Overview 2

1.2 Sinewave Output 2

1.3 Smart Buck and Boost Line Conditioning 2

1.4 User Replaceable Battery Design 3

1.5 Advanced Interface to Communicate with Computer 3

1.6 User Configurable Settings 3

1.7 Schedule Shutdown & Startup 3

1.8 Data-Line Surge Protection 3

2. UPS CONTROLS

2.1 External Views 4

Front Panel Controls

2.2 On/Off Button 5

2.3 Test/Silence Button 5

2.4 Status Indication 5

2.5 Communication Port 6

2.6 User Configurable Settings 6

2.7 Start-Up on Battery 6

2.8 Data-Line Surge Suppression 7

3. INSTALLATION AND OPERATION

3.1 Unpacking and Inspection 8

3.2 Placement 8

3.3 Determining How Much Equipment You 9

Can Connect to Your UPS

3.4 Powering Up Your UPS 9

3.5 Connecting Your Equipment to the UPS 10

3.6 Operation and Functional Test 11

3.7 Storage Instructions 11

4. SPECIFICATIONS

4.1 Electrical Specifications 12

4.2 Mechanical Specifications 14

4.3 Environmental Specifications 14

5. TROUBLESHOOTING

5.1 Troubleshooting Chart 15

6. USER REPLACEABLE BATTERY

6.1 Warning 16

6.2 Battery Replacement Procedure 17

2 PS500B/PS800B

1. INTRODUCTION

1.1 Overview

These models are advanced line-interactive true sinewave uninterruptible

power systems (UPS) designed to prevent spikes, surges, sags, transients and

blackouts from reaching your sensitive equipment. Your equipment may

include such items as computers and computerized instruments to

telecommunication systems. When AC power is present, the UPS filters and

conditions the power continuously. When AC power fails, the unit employs its

internal maintenance-free battery to supply back-up power without interruption.

AC SOURC E

EMI/ RFI

NOISEFILTER SMARTLINE

CONDITIONER

BATTERY

CHARGER

DC/AC INVERTER VOLTAG ETRAN SFO RMER

TRA NSF ER

SWITCH

TO LOAD

MICROPROCESSOR

Power Seri es Featur es

(i.e., your

equipment)

1.2 Sinewave Output

The output voltage is true sinewave, the same waveform that your equipment

gets from the wall outlet. This provides guaranteed compatibility with all types

of loads and even the most sensitive equipment.

1.3 Smart Buck and Boost Line Conditioning

The voltage from your AC power source can fluctuate above and below the

standard rating. This microprocessor controlled UPS provide line conditioning

via both buck (step-down voltage) and boost (step-up voltage) functions. For

example, if your normal voltage is 120V and the voltage fluctuates up to 135V,

the buck function in your UPS will step it down so that your equipment receives

approximately 120V. If the voltage fluctuates down to 105V, the boost function

will step it up so that your equipment receives approximately 120V. This

provides your equipment with excellent voltage regulation with less possibility

for the UPS to drain its internal battery.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels OPTI-UPS UPS

OPTI-UPS

OPTI-UPS On Line UPS Series DS100KC33 Manuel utilisateur

OPTI-UPS

OPTI-UPS Clever Series CS385B Manuel utilisateur

OPTI-UPS

OPTI-UPS DS-D33 Manuel utilisateur

OPTI-UPS

OPTI-UPS 280ES Manuel utilisateur

OPTI-UPS

OPTI-UPS DS1000B Manuel utilisateur

OPTI-UPS

OPTI-UPS Line Interactive UPS Series CS500B Manuel utilisateur

OPTI-UPS

OPTI-UPS DS1000B Manuel utilisateur

OPTI-UPS

OPTI-UPS Power Series Manuel utilisateur

OPTI-UPS

OPTI-UPS DS-D33 Manuel utilisateur

OPTI-UPS

OPTI-UPS Power PS500C Manuel utilisateur

OPTI-UPS

OPTI-UPS Reliable Series RS1200 Manuel utilisateur

OPTI-UPS

OPTI-UPS OD330 Manuel utilisateur

OPTI-UPS

OPTI-UPS High-Frequency Online UPS DS1000E Manuel utilisateur

OPTI-UPS

OPTI-UPS IS1700NT Manuel utilisateur

OPTI-UPS

OPTI-UPS Inverter Series Manuel utilisateur

OPTI-UPS

OPTI-UPS Thunder Shield Series TS1000 Manuel utilisateur

OPTI-UPS

OPTI-UPS PS650D Manuel utilisateur

OPTI-UPS

OPTI-UPS Standby UPS System Manuel utilisateur

OPTI-UPS

OPTI-UPS AS450 Manuel utilisateur

OPTI-UPS

OPTI-UPS Clever CS385B Manuel utilisateur

OPTI-UPS

OPTI-UPS Thunder Shield TS1250W Manuel utilisateur

OPTI-UPS

OPTI-UPS Gaming Series GS1100B Manuel utilisateur

OPTI-UPS

OPTI-UPS Outdoor Series OD1000 Manuel utilisateur

OPTI-UPS

OPTI-UPS EL3000-AL Manuel utilisateur

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur