Norac UC4+ New Navigator 2007+ Manuel utilisateur

Hardi Aftermarket

New Navigator (2007+) & New Commander (2005+)

Installation Manual

Spray Height Controller

Improving the competitiveness of Industry and Agriculture

throu

h Precision Measurement

Printed in Canada

Reorder P/N: UC4+BC+HD7-INST Rev A (Hardi Aftermarket New Navigator (2007+) &

New Commander (2005+))

NOTICE

NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without

the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information

contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.

TABLE OF CONTENTS

1INTRODUCTION .................................................................................................................................................. 1

2GENERAL SYSTEM DESCRIPTION ................................................................................................................... 2

3PARTS LISTS.......................................................................................................................................................... 3

4INSTALLATION PROCEDURE........................................................................................................................... 9

4.1SPRAYER INSPECTION ...................................................................................................................................... 9

4.2BOOM SPEED TEST .......................................................................................................................................... 9

4.3ULTRASONIC SENSOR INSTALLATION........................................................................................................... 12

4.4ROLL SENSOR INSTALLATION........................................................................................................................ 16

4.4.1Boom Frame Roll Sensor Mounting.............................................................................................................................................................17

4.4.2Chassis Roll Sensor Mounting .......................................................................................................................................................................18

4.5HYDRAULIC INSTALLATION........................................................................................................................... 21

4.5.1Valve Assembly..................................................................................................................................................................................................21

4.5.2Valve Mounting .................................................................................................................................................................................................22

4.5.3Hydraulic Plumbing ..........................................................................................................................................................................................23

4.6ELECTRICAL INSTALLATION .......................................................................................................................... 25

4.7COMPLETING THE FACTORY INSTALLATION................................................................................................. 29

5ELECTRICAL REFERENCE – CABLE DRAWINGS........................................................................................ 30

5.1ITEM C02: 44668 –SENSOR BRANCH CABLE ................................................................................................ 30

5.2ITEM C02B: 44664 –CABLE UC4 CAN NODE DUAL................................................................................... 30

5.3ITEM C03: 44656D –CABLE VALVE VARIABLE RATE DT ............................................................................. 31

5.4ITEM C10: 44650-35 –POWER GENERIC CABLE PULL-TYPE ........................................................................ 32

5.5ITEM C11: 44651-03 –VALVE EXTENSION GENERIC CABLE......................................................................... 33

5.6ITEM C12: 44658-42 –INTERFACE CABLE AMP ML ONLY........................................................................... 34

5.7ITEM C13: 44658-60 –BYPASS INTERFACE CABLE AMP .............................................................................. 35

5.8ITEM C16: 44658-49 –VALVE CABLE ROLL PIGTAIL..................................................................................... 36

1 INTRODUCTION

Congratulations on your purchase of the NORAC UC4+ Spray Height Controller. This system is

manufactured with top quality components and is engineered using the latest technology to provide

operating features and reliability unmatched for years to come.

When properly used the system can provide protection from sprayer boom damage, improve sprayer

efficiency, and ensure chemicals are applied correctly.

Please take the time to read this manual completely before attempting to install the system. A thorough

understanding of this manual will ensure that you receive the maximum benefit from the system.

YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have suggestions

regarding the parts list or the installation procedure, please don’t hesitate to contact us.

2 GENERAL SYSTEM DESCRIPTION

Figure 1 depicts the general system layout of the UC4+ Spray Height Control system.

Figure 1 – System Components and General Location

NOTICE:

Every effort has been made to ensure the

accuracy of the information contained in this

manual. All parts supplied are selected specially

to fit the sprayer to facilitate a complete

installation. However, NORAC cannot

guarantee all parts fit as intended due to the

variations of the sprayer by the manufacturer.

Please read this manual in its entirety

before attempting installation.

ATTENTION:

When installing the UC4+ Spray Height Control

system please be aware that at a point in the

installation your sprayer booms will be

inoperative until the installation is complete.

Any installation procedure requiring

boom movement will need to be done

first. Once the hydraulics have been

disconnected you must complete the electrical

installation before the booms become operative.

3 PARTS LISTS

The parts that come with your UC4+ Sprayer Boom System are listed in Table 1. The item number on

the left side of this table references each part.

Please ensure that all parts in your kit are present before proceeding with your installation.

Table 1 – Hardi Aftermarket Spray Height Control system Parts

Item Part Number Name Quantity

B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1

B11 43743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1

B13 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2

C02 44668 CABLE UC3 SENSOR BRANCH 1 AMP RECEPT 3 AMP PLUG BC 1

C02B 44664 CABLE UC4 CAN NODE DUAL 1

C03 44656D CABLE VALVE VARIABLE RATE DT 1

C10 44650-35 CABLE POWER GENERIC PULL-TYPE 1

C11 44651-03 CABLE EXTENSION VALVE GENERIC 1

C12 44658-42 CABLE INTERFACE UC4 BC C12 AMP ML ONLY 1

C13 44658-60 CABLE BYPASS INTERFACE AMP 1

C16 44658-49 CABLE VALVE UC4 BC C5 ROLL PIGTAIL 1

E01 4461BC UC4 PLUS BOOM CONTROL PANEL 1

E02 44631 UC4 ULTRASOUND SENSOR 3

E03 45000* UC4 PLUS ROLL SENSOR W TEMPERATURE PROBE VER. 2 1

E04 45001* UC4 PLUS ROLL SENSOR VER. 2 1

H01 44863-01 HOSE ASSEMBLY 122R2-06 36 IN L 6FJX 6FJX 2

H02 44863-07 HOSE ASSEMBLY 122R2-06 60 IN L 6FJX 6FJX90 4

H20 44865-63 HYDRAULICS FITTING KIT - HD7 1

M01 446BC+MAN7 OPERATOR MANUAL UC4+ SPRAY HEIGHT CONTROL 1

M10 UC4+BC+HD7-INST MANUAL INSTALLATION UC4+ HARDI AFTERMARKET 1

V01 44963D VALVE BLOCK ASSEMBLY 2 STATION CC/LS PROP DT 4 BOLT 1

* For systems purchased BEFORE October 1, 2011, the roll sensor part numbers are 44641 and 44642.

Table 2 - 44865-63 - Hydraulics Fittings Kit Details

Item Part Number Name Quantity

Picture

F01 44928 ORIFICE INSERT .047 IN ONE WAY 4

F02 103312 MALE ADAPTER - 6MB 6MJ 6

F03 104369 PLUG - 6MBP 2

F04 105431 4FBSPPX 6MJ 6

F05 105432 4MBSPPT 4FBSPPRX 6

6 M B - 6 M OR X 90

SIZE IN

1/16TH'S

GENDER: MALE

OR FEMALE

90° ANGLE

SWIVEL

TYPE

GENDER

SIZE

TYPE:

B - ORB

J - JIC

OR - FLAT

FACE

P - PIPE

Fitting Name

Example:

The use of dielectric grease is not recommended on any NORAC electrical connections.

To ensure all stainless steel hardware does not gall or seize apply a light coating of the

supplied Permatex Anti-seize grease to all threaded parts upon installation. Permatex

Anti-seize lubricant is preferred, but other similar anti-seize products may be used.

Table 3 - Optional Pressure and Tank Hose Kit (P/N: 44865-49)

If you require a separate pressure and tank line from your tractor to your NORAC valve block, you can

order the hoses and fittings as a kit (P/N: 44865-49).

Part Number Name Quantity

44863-11 HOSE ASSEMBLY 122R2-06 402 IN L 6FJX 8MB WITH QUICK COUPLER 2

103312 MALE ADAPTER - 6MB 6MJ 2

The parts that come with your UC4+ Spray Height Control system are shown below in

their general installation configuration.

Figure 2 – UC4+ Spray Height Control Components

Figure 3 – Hydraulic Components – Double Acting (Eagle Boom)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Norac Contrôleurs

Norac

Norac NITRO Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC4+ Manuel utilisateur

Norac

Norac UC4+ Manuel utilisateur

Norac

Norac UC4+ Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC4+ Roll Control Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC4+ Manuel utilisateur

Norac

Norac Case AFS Pro 600 Manuel utilisateur

Norac

Norac UC4+ Manuel utilisateur

Norac

Norac UC4+ Manuel utilisateur

Norac

Norac UC4+ Hardi OEM Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC4 Plus Rogator 64 Series Manuel utilisateur

Norac

Norac UC4 Plus Rogator 64 Series Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC4.5 Manuel utilisateur

Norac

Norac UC4+ Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC5 Topcon X30 Manuel utilisateur

Norac

Norac UC4+ Case 44 Series Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur