Njoy Echo Pro Series Manuel utilisateur
Sensor Box (Temperature & Humidity)
User manual
UPAC-TEMPHUM-CG01B
Before using this product, carefully read all product documentaon and retain it for future reference.
111.0
2 3
Thank you for purchasing our products!
Please read this manual before using the product.
Focusing on quality at compeve prices, nJoy designs
consumer products for a beer and enjoyable way into
the digital world.
This UPS will protect your electronic equipment from physical
damage and will provide emergency baery backup power to
prevent data loss in the event of power problems.
Table of contents
EN
1. Package contents ...................................................................................................... 3
2. Product overview...................................................................................................... 4
2.1 Product Features ............................................................................................ 4
3. Technical Specicaons .......................................................................................... 5
4. Installaon Guide ...................................................................................................... 6
4.1 Method 1: Hook and Loop Tape Mounng ................................................ 6
4.2 Method 2: Fixed Mounng .......................................................................... 7
5. Conformance Approvals ......................................................................................... 8
5.1 FCC Warning ................................................................................................... 8
6. Troubleshoong ........................................................................................................ 9
7. Appendix ................................................................................................................. 10
7.1 Input Dry Contact Applicaon .................................................................. 10
Package contents1
EMS-U01
Hook and Loop Tape
User’s Manual x 1
Flat Head Screw (M3x20)
with Plasc Nylon Anchor
Technical Specicaons
CAT5 RJ45 Ethernet Cable
(10 feet/3.05 m)
NOTE!
If any of the above package content is missing or is damaged please contact the
shop where you have bought the product from.
nJoy UPS models that are compable with this product:
Echo Pro Series
Aster Series
Argus Series
1K / 2K / 3K
1K / 2K / 3K
1.2K / 2.2K / 3K
4 5
Product overview2
The environmental monitoring sensor (EMS-U01) along with selected Power
Management Cards (PMCARD) enables users to monitor the temperature
and humidity of a server closet and/or data center remotely. Addionally, the
EMS-U01 provides 4 input dry contacts that enable users to monitor the sta-
tus of connected devices, such as door switch sensors.
Features include:
• Real me environment monitoring
• Remote management and conguraon of the sensor via Web Browsers
or NMS
• Automac events nocaon via email, SMS and SNMP traps
• 4 input dry contacts applicaon interface provided
• Displays the name and locaon of the sensor and connected devices
2.1. Product Features
A. LED
B. Input Dry Contact 1-4
C. Common Connecon
D. RJ45 Port (connect to PMCARD)
NOTE!
Please refer to Appendix for
Input Dry Contact Application.
A
DATA
STATUS
COM
4123
C
B
D
Technical Specifications3
EMS-U01
Input Voltage 7V - 28V
Power Dissipaon
Halt mode 72 mW/
Normal mode 110 mW
(Default 12V input)
Measurement Range and Accuracy
Temperature 32-158°F with accuracy ± 1.8°F/
0-70°C with accuracy ± 1°C
Humidity 10-90 RH with accuracy ± 2%
Communicaon
Connecon Port RJ45 Port
Input Dry Contact 4
Physical
Dimensions (L x W x H) 2.32 x 1.77 x 1.14 inches/
59 x 45 x 29 mm
Weight 1.46 oz /41.5 g
Safety Approvals FCC Class B, CE
6 7
Installation Guide4
4.1. Method 1: Hook and Loop
Tape Mounng
Step 1. Clean the surface of the area where
the sensor will be installed. Apply
one side of the hook and loop tape
to the boom of the sensor and the
other side to the sensor locaon.
Step 2. Aach the sensor on the surface and
hold for about 5 seconds to ensure
cohesion.
NOTE!
Once the sensor is installed, you will want to
leave it in place to ensure the hook and loop
tape.
Step 3. To connect the sensor with PM-
CARD, use the aached RJ45 Eth-
ernet Cable. Plug one end into the
RJ45 Port and the other end into the
PMCARD.
NOTE!
If the distance of PMCARD and the sensor is
longer than 10 feet/3.05 m, use a standard RJ45
Ethernet Cable as needed (max 50 feet/15 m).
Universal RX/TXLink
PMCARD
4.2. Method 2: Fixed Mounng
Step 1. Drill a hole that is compable with the anchor and insert the includ-
ed anchor.
Step 2. Insert and ghten the screw into the anchor. Leave enough of the
screw exposed for the sensor to be mounted to.
Step 3. Hang the sensor horizontally or vercally.
HoleØ6mm (0.24in)
8 9
Step 4. To connect the sensor with PMCARD, use the aached RJ45 Ether-
net Cable. Plug one end into the RJ45 Port and the other end into
the PMCARD.
For further conguraon informaon, please refer to the PMCARD user’s manual.
Conformance Approvals5
5.1. FCC Warning
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protecon against harmful interference
in a residenal installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
Universal RX/TXLink
PMCARD
installaon. If this equipment does not cause harmful interference to radio
or television recepon, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device compiles with Part 15 of the FCC Rules. Operaon is subject to
the following two condions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operaon.
NOTE!
The manufacturer is not responsible for any radio or tv interference caused by
unauthorized to this equipment. Such modifications could void the user’s authority
to operate the equipment.
Troubleshooting6
Problem Soluon
The PMCARD is not
able to acquire en-
vironment sensor’s
informaon.
Check the LED.
When the connecon is ok, the LED should always
be on; otherwise, ensure the RJ45 Ethernet cable is
correctly connected to the PMCARD and sensor.
NOTE!
Do not use a crossover cable which is for Tx/Rx.
The Input Dry
Contact does not
funcon correctly.
Ensure the Input Dry Contact wires are correctly
connected and make sure the open/short circuit
seng of the connected devices is the same as the
seng on the Web Interface.
10
Appendix7
7.1. Input Dry Contact Applicaon
Do not input signals that carry voltage into the input dry contacts. The input
dry contacts only allow for open/short circuit.
This product can expose you to chemicals including Styrene, which
is known to the State of California to cause cancer, and Bisphenol-A,
which is known to the State of California to cause birth defects or
other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
WARNINGS
Dry Contact
External Sensor 1/2/3/4
COM
1234 Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collecon systems)
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste.
Instead it shall be handed over to the applicable collecon point for the recycling
of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potenal
negave consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources.
Autres manuels pour Echo Pro Series
1
Ce manuel convient aux modèles suivants
12
Table des matières
Autres manuels Njoy UPS
Njoy
Njoy Argus Series Manuel utilisateur
Njoy
Njoy Argus Series Manuel utilisateur
Njoy
Njoy PWAV-10001AK-AZ01B Manuel utilisateur
Njoy
Njoy Balder 1500 Manuel utilisateur
Njoy
Njoy PWUP-LI060HR-AZ01B Manuel utilisateur
Njoy
Njoy Aten PRO Series Manuel utilisateur
Njoy
Njoy Garun Series Manuel utilisateur
Njoy
Njoy Septu Series Manuel utilisateur
Njoy
Njoy Code Series Manuel utilisateur
Njoy
Njoy Balder Series Manuel utilisateur
Njoy
Njoy Cadu Series Manuel utilisateur
Njoy
Njoy UPCMTOP960HASCG02B Manuel utilisateur
Njoy
Njoy Keen Series Manuel utilisateur
Njoy
Njoy Horus Plus Series Manuel utilisateur
Njoy
Njoy Token Series Manuel utilisateur
Njoy
Njoy UPCSBLS665TRPCG01B Manuel utilisateur
Njoy
Njoy Balder Series Manuel utilisateur
Njoy
Njoy Eris 600 Manuel utilisateur
Njoy
Njoy Balder Series Manuel utilisateur
Njoy
Njoy Cadu 650 Manuel utilisateur
Manuels UPS populaires d'autres marques
Pylontech
Pylontech Victron & Pylontech US5000 Manuel utilisateur
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur
Mecer
Mecer ME-1000-WTU Manuel utilisateur
Mustek
Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation
Emerson
Emerson Liebert NXL series Manuel utilisateur
MAKELSAN
MAKELSAN BOXER SERIES Manuel utilisateur
