NETGEAR ReadyNAS OS 6 Desktop Storage Systems Manuel utilisateur

ReadyNAS OS 6 Desktop Storage

Systems Installation Guide

Contents

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Reformat Disks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Package Contents

ReadyNAS system

Resource CD

Ethernet cable Power adapter and power cord

(varies by model)

IMPORTANT: Read all safety warnings in the hardware manual for

your system before connecting the system to the power supply.

Basic Setup

After you follow these instructions, your ReadyNAS is ready to use in

a production environment. Setup takes approximately 15 minutes.

To set up your storage system:

1. Install all available disks that you want to use in your ReadyNAS

system.

Note: If you are using previously formatted disks that contain

data, you must reformat these disks before continuing. See

Reformat Disks on page 7.

For a list of supported disks, see the Hardware Compatibility List

at http://www.netgear.com/readynas-hcl.

For information about installing disks, see the hardware manual

for your system.

2. Place your system in a location that provides adequate

ventilation.

High-capacity disks can produce considerable heat. It is

important to ensure that the fan exhausts are unobstructed.

For a complete list of placement considerations, see the

hardware manual for your system.

3. Connect the power adapter to the power cord.

4. Connect the power adapter to the back of the system and plug

the power cord into a wall outlet or power strip.

5. Use an Ethernet cable to connect an Ethernet port on the

storage system to your network.

6. If necessary, press the Power button to turn on the system.

7. Wait for the Power LED to turn solid blue or for the status

display screen to display the system’s IP address.

8. Visit http://readycloud.netgear.com on a computer that uses the

same local area network (LAN) and Internet connection as your

ReadyNAS system.

Note: If your computer does not have Internet access, install and

run the RAIDar utility instead. RAIDar is on the resource CD that

came with your system.

9. Click the Discover button.

ReadyCLOUD automatically detects your ReadyNAS system on

the network.

Your new ReadyNAS system is marked with a NEW label.

10. Click the Setup button.

11. Select the mode that you want to use to set up your system.

•Option 1. Select ReadyCLOUD mode.

aSign in to ReadyCLOUD or create a user account.

bFollow the prompts to configure your ReadyNAS

system.

•Option 2. Select Offline mode.

An SSL certificate security warning displays. This warning

ensures an encrypted authentication and secure access to the

ReadyNAS local admin page for your storage system.

aAccept the certificate.

A login prompt displays.

bEnter admin for the user name, enter password for the

password, and click the OK button.

Note: You can change these credentials when you configure

your system. NETGEAR recommends that you change your

password as soon as possible.

The ReadyNAS local admin page displays in your

browser and launches a setup wizard.

cFollow the prompts of the setup wizard to configure your

ReadyNAS system.

The setup process is complete. You can begin using your ReadyNAS

storage system.

Reformat Disks

If you are using previously formatted disks that contain data, you

must reformat the disks before you can use them with your

ReadyNAS system.

Warning: This process erases all data and reformats all disks into a

single X-RAID2 volume. If you want to preserve the data on the disks,

you must back up the data to an external drive before using the disks

in your ReadyNAS storage system.

To reformat previously formatted disks:

1. If your system is powered on, gracefully power off the system.

See Additional Information on page 9.

2. Install the previously formatted disks.

For a list of supported disks, see the Hardware Compatibility List

at http://www.netgear.com/readynas-hcl.

For information about installing disks, see the hardware manual

for your system.

3. Using a straightened paper clip, press and hold the Reset button.

4. Press the Power button.

The system powers on.

5. Continue pressing the Reset button until the system enters boot

mode.

•If you have a 2-bay storage system, the Power, Disk 1,

Disk 2, and Backup LEDs light when the system is in boot

mode.

•If you have a 4-bay or 6-bay storage system, the status

display screen indicates that the system is in boot mode.

6. Select the factory default option from the boot menu.

•If you have a 2-bay storage system, do the following:

aScroll through the boot menu options by pressing the

Backup button.

bWhen only the Disk 1 LED is lit, press and release the

Reset button.

•If you have a 4-bay storage system, do the following:

aScroll through the boot menu options by pressing the

Backup button.

bWhen the status display screen shows the factory

default option, press and release the Reset button.

•If you have a 6-bay storage system:

aScroll through the boot menu options using the arrows on

the touchpad.

bWhen the status display screen shows the factory

default option, press the OK button.

The system initiates a short disk test that takes 2 to 5 minutes.

Then, a 10-minute time-out period begins. After 10 minutes, the

factory default process starts.

7. (Optional) Press the Backup or OK button to skip the 10-minute

time-out period and begin the factory default process immediately.

The system returns to its factory default settings and reformats all

installed disks for use with ReadyNAS OS 6.

When the factory default process is complete, the reformatted disks

are ready to use with your system.

Additional Information

To help keep your storage system healthy and prevent the risk of

data loss, follow these rules of usage:

•Never replace more than one disk at a time while the system is

powered on.

•If you need to power off your system, power it off gracefully, when

possible.

To gracefully power off a 2-bay storage system:

Press the Power button twice.

To gracefully power off a 4-bay or 6-bay storage system:

Press the Power button three times.

For more information about setting up, configuring, and using your

system, see the software and hardware manuals for your system.

Links to these manuals are included on the resource CD that came

with your system and are also available at

http://support.netgear.com/product/ReadyNAS-OS6 or through a link

in the product’s user interface.

Autres manuels pour ReadyNAS OS 6 Desktop Storage Systems

Table des matières

Autres manuels NETGEAR Matériel réseau

NETGEAR

NETGEAR Orbi Pro WiFi 6 Mini router Manuel utilisateur

NETGEAR

NETGEAR XAVB1004 Manuel utilisateur

NETGEAR

NETGEAR XAVBI 301 Manuel utilisateur

NETGEAR

NETGEAR Insight Instant AirBridge Manuel utilisateur

NETGEAR

NETGEAR EX6150 AC1200 Manuel utilisateur

NETGEAR

NETGEAR Sb 104 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk Mesh WiFi 6 System Manuel utilisateur

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Manuel utilisateur

NETGEAR

NETGEAR ProSafe UTM9S Manuel utilisateur

NETGEAR

NETGEAR UTM10 - ProSecure Unified Threat Management... Instructions d'installation et d'utilisation

NETGEAR

NETGEAR ProSafe ANT2409 Manuel utilisateur

NETGEAR

NETGEAR ProSecure UTM150 Manuel utilisateur

NETGEAR

NETGEAR ReadyDATA 5200 Manuel utilisateur

NETGEAR

NETGEAR MS2110 - Stora NAS Server Manuel utilisateur

NETGEAR

NETGEAR RN12P0610 - ReadyNAS 3200 Manuel utilisateur

NETGEAR

NETGEAR STM150 - ProSecure Web And Email Threat Management... Manuel utilisateur

NETGEAR

NETGEAR ReadyNAS OS 6 Desktop Storage Systems Manuel utilisateur

NETGEAR

NETGEAR WN1000RP Manuel utilisateur

NETGEAR

NETGEAR RND4475 - ReadyNAS NV+ NAS Server Instructions de montage

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Manuel utilisateur

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Manuel

NETGEAR

NETGEAR ReadyNAS 2120 Manuel utilisateur

NETGEAR

NETGEAR ReadyDATA 5200 Manuel utilisateur

NETGEAR

NETGEAR Powerline AV 200 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur