NETGEAR Powerline AV 200 Manuel utilisateur

NETGEAR, the NETGEAR logo, and Connect

with Innovation are trademarks and/or

registered trademarks of NETGEAR, Inc. and/

or its subsidiaries in the United States and/or

other countries. Information is subject to

change without notice. © NETGEAR, Inc. All

rights reserved.

For indoor use only. Valid for sale in all EU

member states, EFTA states, and Switzerland.

March 2013

Installation Guide

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

LED and Button Descriptions

Item Description

Power

LED

•Solid green. The electrical power is on.

•Solid amber. The adapter is in power saving mode.

Power saving mode is disabled by default.

•Blinking green. The adapter is in the process of

setting up security.

•Off. There is no electrical power.

Ethernet

LED

•Solid. The adapter is connected through the

Ethernet port to a powered-on Ethernet device.

•Off. There is no Ethernet connection.

Powerline LED

Power LED

Ethernet LED

Factory Reset button

Security button

Powerline AV 200 Mini Set XAVB1301

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the

label of your product and use it to register your product at

https://my.netgear.com.

You must register your product before you can use NETGEAR

telephone support. NETGEAR recommends registering your

product through the NETGEAR website.

For product updates and web support, visit

http://support.netgear.com.

NETGEAR recommends that you use only the official

NETGEAR support resources.

You can get the user manual online at 

http://downloadcenter.netgear.com or through a link in the

product’s user interface.

For the current EU Declaration of Conformity, visit 

http://support.netgear.com/app/answers/detail/a_id/11621/.

Package Contents

WARNING: Do not press the Security button on the Powerline

adapter until installation is complete and the adapters are

communicating with each other (indicated by the blinking Powerline

LED). Pressing this button too soon can temporarily disable Powerline

communication. If this should occur, use the Factory Reset button to

return the Powerline adapter to its factory default settings.

Powerline

LED

•Solid. The adapter is connected to a Powerline

network.

•Off. The adapter has not found any other

compatible Powerline devices using the same

encryption key.

The Pick A Plug feature lets you pick the electrical

outlet with the fastest link rate, indicated by the color of

the LED.

Green: Link

rate > 80 Mbps

(Fast)

Amber: Link rate >

50 and < 80 Mbps 

(Medium)

Red: Link

rate < 50

Mbps (Slow)

Factory

Reset

Press the Reset button for 1 second, then release it to

return the Powerline adapter to its factory default

settings.

Security

Button

After you plug in your new adapter, press the Security

button for 2 seconds, then press the Security button

on one of the other adapters in your existing network

for 2 seconds. Both buttons must be pressed within 2

minutes.

To enable power saving mode, press and hold the

Security button for 10 seconds or more, then release

it. Pressing the Security button again powers the

adapter back on.

Item Description

Powerline

AV 200 Mini

Adapters

Ethernet

cables

Room 1 Room 2

Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101, 

XAV1004, XAV2001, XAV2501, XAU2511, XAV2101, XAV2602, XAV1401, XAV1601 and XAVN2001.

For a complete list of AV certified devices, go to http://www.homeplug.org/certified_products.

Safety Information

•AC input: 100-240V, 60mA (Max).

•Operating temperature: 0–35°C.

•The socket-outlet shall be installed near the equipment and

shall be easily accessible.

Troubleshooting Tips

Power LED is

off

Make sure that power is supplied to the electrical

outlet and that the Powerline devices are not

plugged into an extension cord, power strip, or

surge protector.

Power LED is

amber

The Powerline adapter is in power saving mode.

To return the adapter to normal mode, press the

Security button.

Powerline LED

is off

• If you have set network security, make sure that

all Power line devices are using the same

encryption key. For more information, see the

online User Manual.

• Press the Reset button on each device for 1

second to return the Powerline adapter to its

factory default settings.

Powerline LED

is amber or red

Move the Powerline device to a closer location.

Ethernet LED is

off

Make sure that the Ethernet cables are working

and securely plugged into the devices.

Press the Reset button on each device for 1

second to return the Powerline adapter to its

factory default settings.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NETGEAR Matériel réseau

NETGEAR

NETGEAR RND2175 - ReadyNAS Duo NAS Server Manuel utilisateur

NETGEAR

NETGEAR ProSafe UTM9S Manuel utilisateur

NETGEAR

NETGEAR AXM751 - ProSafe XFP Transceiver Module Manuel utilisateur

NETGEAR

NETGEAR UTM10 - ProSecure Unified Threat Management... Instructions d'installation et d'utilisation

NETGEAR

NETGEAR Orbi RBK50 Manuel utilisateur

NETGEAR

NETGEAR Orbi NBR750 Manuel utilisateur

NETGEAR

NETGEAR RN12P0610 - ReadyNAS 3200 Instructions de montage

NETGEAR

NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub... Manuel utilisateur

NETGEAR

NETGEAR RN12P0610 - ReadyNAS 3200 Manuel utilisateur

NETGEAR

NETGEAR FB 104 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk Mesh WiFi 6 System Manuel utilisateur

NETGEAR

NETGEAR AGM722F Manuel utilisateur

NETGEAR

NETGEAR ANT24BDC - Power Injector For The 500 mW... Manuel utilisateur

NETGEAR

NETGEAR ReadyNAS OS 6 Desktop Storage Systems Manuel utilisateur

NETGEAR

NETGEAR M5300 Series Mode d’emploi

NETGEAR

NETGEAR Stora Manuel utilisateur

NETGEAR

NETGEAR AX742 - ProSafe 24 Gigabit Stacking Manuel utilisateur

NETGEAR

NETGEAR RND4000 - ReadyNAS NV+ NAS Server Guide de l'utilisateur

NETGEAR

NETGEAR XAVBI 301 Manuel utilisateur

NETGEAR

NETGEAR ReadyDATA 5200 Manuel utilisateur

NETGEAR

NETGEAR ReadyNAS OS 6 Desktop Storage Systems Manuel utilisateur

NETGEAR

NETGEAR ProSafe UTM9S Manuel utilisateur

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Manuel

NETGEAR

NETGEAR MS2110 - Stora NAS Server Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur