NETGEAR AXM751 - ProSafe XFP Transceiver Module Manuel utilisateur

)NSTALLATION'UIDE

XFP GBIC Module AXM751

The 10 Gigabit small form-factor pluggable (XFP) module provides a

full-duplex 10G bps Ethernet link on NETGEAR managed switches.

The switch will automatically detect the AXM751, so you can simply

plug it into an available module slot.

The module can be inserted or removed while the switch is operational.

Installing a AXM751 Module

Insert the module firmly into the slot that supports the XFP interface.

Make sure the optical cable you use is multi-mode LC to LC duplex

cable.

Removing a AXM751 Module

Release the module latch by pulling down the handle bar across the

module, and pull the module out of the module slot.

Specifications

Standard IEEE 802.3ae

10GBase LR

Dimensions (HxWxD) 0.33” x 0.72” x 3.07”

(8.5mm x 18.35mm x 78.0 mm)

Weight 0.1 lb (47g)

Operating Temperature 32- 158 F (0-70c)

Storage Temperature 32-185 F (0-85c)

Operative relative humidity 104 (40c) and 90%

Operating Distance 33m (62um OM1 cable)

82m (50um OM2 cable)

220m (50um OM3 cable)

Connectors LC MM for 62.5um fiber cable

LC MM for 50um fiber cable

Power Consumption 0.95w (max: 1.37w)

MTBF 1154739 hr (135 years)

Safety Certification UL 1950

CSA 22.2 No. 950

June 6, 2006

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should

be treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

GEAR, Inc. in the United States and/or other countries. Other brand and product names are

trademarks or registered trademarks of their respective holders. Information is subject to change

without notice.

Regulatory Compliance

The regulatory compliance details are documented below.

Statement of Conditions

In the interest of improving internal design, operational function, and/or

reliability, NETGEAR reserves the right to change the product

described in this document without notice. NETGEAR does not assume

any liability that may accrue due to the use or application of the

product(s) or circuit layout(s) described herein.

Certificate of Manufacture/Importer

It is hereby certified the NETGEAR model AXM751 has being

suppressed in accordance with the condition set out in MBPT-

Amtsb|Vfg 243/1991 and vfg 46/1992. The operation of some

equipment (for example, test transmitters) in accordance with regulation

may, however, be subject to certain restrictions. Please refer to the note

in the operating instructions. Federal Office for Telecommunications

Approvals has being notified of the placing of this equipment on the

market and has being granted the right to test the series for compliance

with regulation.

Note: This device has being tested and found to comply with limits for a

Class B digital device, pursuant to part 15 of FCC rules. These limits

are designed to provide reasonable protection against harmful

interference in a commercial installation.

Laser Safety Warning

This is a Class 1 laser product.

Warning: Because invisible laser radiation may be emitted from aperture of

the port when no fiber cable is connected, avoid exposure to laser

radiation and do not stare into open aperture.

Autres manuels pour AXM751 - ProSafe XFP Transceiver Module

Table des matières

Autres manuels NETGEAR Matériel réseau

NETGEAR

NETGEAR ReadyNAS Duo Manuel utilisateur

NETGEAR

NETGEAR WN1000RP Manuel utilisateur

NETGEAR

NETGEAR Orbi NBR750 Manuel utilisateur

NETGEAR

NETGEAR UTM5EW-100NAS Manuel utilisateur

NETGEAR

NETGEAR ANT24BNA Manuel utilisateur

NETGEAR

NETGEAR UTM10 - ProSecure Unified Threat Management... Instructions d'installation et d'utilisation

NETGEAR

NETGEAR ProSafe UTM9S Manuel utilisateur

NETGEAR

NETGEAR Powerline AV 200 Manuel utilisateur

NETGEAR

NETGEAR ProSafe ANT2409 Manuel utilisateur

NETGEAR

NETGEAR ReadyNAS RN312 Manuel utilisateur

NETGEAR

NETGEAR ReadyNAS 2120 Manuel utilisateur

NETGEAR

NETGEAR RNDP600E - ReadyNAS Pro Pioneer Edition NAS... Manuel utilisateur

NETGEAR

NETGEAR ProSafe AX742 Manuel utilisateur

NETGEAR

NETGEAR ANT24BDC - Power Injector For The 500 mW... Manuel utilisateur

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... Manuel

NETGEAR

NETGEAR RND4475 - ReadyNAS NV+ NAS Server Instructions de montage

NETGEAR

NETGEAR Sprint Spark Fiche technique

NETGEAR

NETGEAR Stora Manuel utilisateur

NETGEAR

NETGEAR XAVBI 301 Manuel utilisateur

NETGEAR

NETGEAR AX764 Manuel utilisateur

NETGEAR

NETGEAR M4100 Series ProSAFE Manuel utilisateur

NETGEAR

NETGEAR GS716TP Manuel

NETGEAR

NETGEAR ProSecure UTM150 Manuel utilisateur

NETGEAR

NETGEAR ProSafe UTM9S Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur