NEC N8102-509F Manuel utilisateur
856-129899-202-00
Keep this manual in safe place.
BEFORE ASSEMBLING
Before installing this Additional Memory Board in your basic processing unit (including NEC
Express Server), carefully read through and understand the precautions for use described in
the Getting Started supplied with the basic processing unit to use the product safely.
We recommend that you have your local service/maintenance center do this expansion work.
N8102-509F/510F/511F/512F/513F
Additional Memory Board
User’s Guide
*856-129899-202-00/*
N8102-509F/510F/511F/512F/513F
Additional Memory Board
User's Guide
WARNING
If you disregard the precautions, it may cause malfunction of the device, human body injury,
fire and/or damage to the machine parts around the device.
Unplug the power plug
Make sure to unplug the power plug from the electrical outlet and
unplug the cables connected to external devices from the
machine before installing or removing the product.
Touching the device of the NEC Express server with its power
plug connected to a power source may cause an electric shock
even if the NEC Express server is powered off.
Electric shock hazard
Prohibition of
disassembly
Fire hazard
Never attempt to disassemble, repair, or alter the NEC
Express server under any circumstances other than
described in this guide. Failure to follow these instructions
may cause an electric shock or fires as well as malfunctions
of the server.
Electric shock hazard
*856-129899-202-00 *
856-129899-202-00
Components
Quantity N8102- Remarks
No. Parts Name
509F 510F 511F 512F 513F
1 Additional Memory Board
Installation Instruction 1 1 1 1 1 This Sheet
2GB DIMM 1 －－－－Unbuffered Memory
4GB DIMM －1 －－－Unbuffered Memory
8GB DIMM －－1 －－Registered Memory
16GB DIMM －－－1 －Registered Memory
2
32GB DIMM －－－－1 Registered Memory
Caution
Follow these notes when you install the Memory Board.
Do not put the Additional Memory in a dusty place.
Do not put the Additional Memory in a place where water or liquid is likely to splash onto the
board.
Do not put the Additional Memory in a place where steam of sulfur occurs in the air.
Do not put the Additional Memory in magnetic field.
Do not touch any terminal pin of Additional Memory.
Transfer to a Third Party
When transferring (or selling) this product to a third party, please make sure to
provide this guide along with the product.
856-129899-202-00
Memory Clock
The server supports the memory clock speed of DDR3L-1066/1333/1600MHz. However, the actual memory clock
speed depends on CPU and memory configuration. (All of DIMMs installed operate at the same clock speed.)
856-129899-202-00
1. DIMM installation order
Note DIMM installation order in 1-CPU configuration differs from that in 2-CPU
configuration.
If CPU2 is not installed, CPU2_DIMM1 to CPU2_DIMM6 are disabled.
Refer to List of features supported by additiional memory board before using
memory RAS feature.
In 1-CPU configuration, install two DIMMs starting from the smallest slot number.
In 2-CPU configuration, alternately install two DIMMs starting from the smallest slot number of each CPU.
Installation order depends on combination of DIMMs to be installed. See the table below to find allowable
combination of DIMMs, and install DIMMs starting from the largest capacity and from the smallest slot
number.
N8102-
N code 509F 510F 511F 512F 513F
N8102-509F 2GB DDR3-1600 UNB Memory Kit ○○
N8102-510F 4GB DDR3-1600 UNB Memory Kit ○○
N8102-512F 16GB DDR3-1600 REG Memory Kit ○○○
N8102-513F 32GB DDR3-1066 REG Memory Kit ○○○
N8102-513F 32GB DDR3-1066 REG Memory Kit ○○○
: Allowed to be install together. : Not allowed to be install together.
2. Installation procedure
(1) Checking where the memory board is installed.
(2) Remove the side cover and CPU duct according to "Preparing for Installation and Removal"
described in the User's Guide.
(3) Make sure of the socket to install DIMM.
Refer to the User's Guide of the server for locations of DIMM sockets on mother board (see
the following figure).
CPU2_DIMM1
CPU2_DIMM4
CPU2_DIMM2
CPU2_DIMM5
CPU2_DIMM3
CPU2_DIMM6
CPU1_DIMM6
CPU1_DIMM3
CPU1_DIMM5
CPU1_DIMM2
CPU1_DIMM4
CPU1_DIMM1
856-129899-202-00
(4) Memory board installation procedure
a. The memory board has cutouts to prevent incorrect insertion. Please orient the board so
that the connector polarity and board cutouts match. (See the following figure)
b. Insert the board vertically on the connector. Press the levers at each end of the connector
so that they fasten the half-circle shaped cutouts on each edge of the board. (See the
following figure)
(5) Continue to install or remove internal optional devices, mount and connect the server, and
turn it on.
(6) Confirm that no error messages are displayed in POST screen.
If any error messages are displayed, refer to Chapter 3 (2.BIOS Setup Utility) for BIOS Setup Utility in
“User’s Guide”.
(7) Run BIOS Setup Utility, and select Memory Configuration and then Memory Information
from the Advanced menu. Make sure the capacity of added DIMM is displayed properly.
Refer to Chapter 3 (2.BIOS Setup Utility) for BIOS Setup Utility in “User’s Guide”.
(8) Select Memory Configuration from the Advanced menu, and then specify Yes for Memory
Retest.
After that, select Save Changes and Exit to reboot.
856-129899-202-00
－ ＭＥＭＯ －
N8102-509F/510F/511F/512F/513F
Additional Memory Board
User’s Guide
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels NEC Stockage
NEC
NEC NR-9300 Manuel utilisateur
NEC
NEC N8151-105 Guide de l'utilisateur
NEC
NEC Storage Manager Manuel utilisateur
NEC
NEC N8151-54 Manuel utilisateur
NEC
NEC D2246 Manuel d'utilisation
NEC
NEC S1500 Manuel utilisateur
NEC
NEC NS170 Manuel utilisateur
NEC
NEC N8151-143 Guide de l'utilisateur
NEC
NEC N8102-686 Manuel utilisateur
NEC
NEC N8151-34B Manuel utilisateur
NEC
NEC FD1165 Manuel utilisateur
NEC
NEC N8102-693 Manuel utilisateur
NEC
NEC S2500 Manuel utilisateur
NEC
NEC Express5800/R120f-2E Manuel utilisateur
NEC
NEC Storage HS8 Manuel utilisateur
NEC
NEC N8118-301 Manuel utilisateur
NEC
NEC FDI036A Caractéristiques techniques
NEC
NEC M100 Manuel utilisateur
NEC
NEC ST1240 Manuel utilisateur
NEC
NEC VERSA S1300 Series Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur