Motorola SURFBOARD SBG1000 Manuel utilisateur

Quick Installation Guide

SURFboard

Wireless Cable Modem Gateway

SBG1000

2Wireless Cable Modem Gateway SBG1000

A home network enables you to access and move information between two or

more computers in your home or business. You can connect your home network

to your cable TV system to connect to the Internet.

Your SURFboard Gateway SBG1000 is the central connection point between

your computers and the Internet. It directs (routes) information between the

computers connected to your home network. A built-in cable modem transmits

information between your home network and the Internet.

The SBG1000 provides different network connection types. You can use a

wireless or a wired connection (or a combination of the two) to connect your

computers to the SBG1000. Your network can use one or any combination of:

§Ethernet local area network (LAN)

§Wireless LAN (WLAN)

§Universal Serial Bus (USB)

§Home Phoneline Networking Alliance(HPNA)

This guide provides information about:

§Optional accessories and network requirements

§Cable, Ethernet, USB, wireless, and printer connections

§Starting the Setup Program

§Introduction to network security and gaming configuration

§Troubleshooting and contact information

Quick Installation Guide 3

This guide contains an overview only. For in-depth information, refer to the

interactive SBG1000 User Guide on the SBG1000 Installation CD-ROM. If

desired, you can print all or part of the user guide.

Optional Accessories

All networks are composed of multiple devices. An SBG1000 works with any

IEEE 802.11g or IEEE 802.11b compliant client product. Motorola supplies a

range of accessories for use with the SBG1000. Some examples are:

Motorola Wireless

Ethernet Bridge

WE800G

Motorola Wireless

Notebook Adapter

WN825G

Motorola Wireless

PCI Adapter

WPCI810G

Motorola Ethernet

Broadband Router

BR700

For more information about Motorola cable modems, gateways, and related

consumer broadband products, visit http://broadband.motorola.com/consumers.

4Wireless Cable Modem Gateway SBG1000

Basic SBG1000 Network Requirements

§An SBG1000

§A connection to your cable TV system

§A subscription to cable modem service from your cable TV provider

§One or more computers with minimum:

§Pentium-class processor or faster

§16 Mb of memory

§10 Mb of hard disk space available

§Windows®98, Windows®98 SE, Windows Me®, Windows®2000,

Windows XP™, Macintosh®, or Linux®with operating system

CD-ROM available

§A wired or wireless network adapter for each computer on the network

§For wired connections, Ethernet cables (one is provided with the

SBG1000)

We recommend plugging the SBG1000 into a surge protector.

Connecting the SBG1000

To connect to Ethernet or USB on a PC running a supported Windows version,

perform the procedures in the following sections in this guide:

For Macintosh or Linux computers, follow the

instructions in the SBG1000 User Guide and the

operating system documentation.

Ethernet A, B, and E

USB A, C, and E

Wireless

A, D, and E

Quick Installation Guide 5

A. Connect the SBG1000 to Your Cable TV System

You may need to call your cable provider to activate your high-speed Internet

service. Your cable provider may require the MAC address labeled CM HFC

MAC ID on the bottom of the SBG1000. Please write your CM HFC MAC ID

here:

00 : ______ : ______ : ______ : ______ : ______

Connecting Directly to the Cable Outlet

1Connect one end of the coaxial cable to the cable TV wall outlet and its

other end to the cable port on the SBG1000.

2Plug the AC power cord into the power connector on the SBG1000.

3Plug the AC power cord into an AC wall outlet or surge protector.

RESET

5 4

6Wireless Cable Modem Gateway SBG1000

Connecting to the Cable Outlet Using a Splitter

Connecting an SBG1000 to the same cable outlet as a TV requires a

5to 900 MHz splitter and two additional coaxial cables.

1Check that one end of the coaxial cable is connected to the cable TV outlet.

2Disconnect that cable from the back of your TV and connect it to the

splitter input.

3Use one coaxial cable to connect the splitter output to your TV.

4Use the other coaxial cable to connect the splitter output to the CABLE port

on your SBG1000.

RESET

5 4

COAXIAL

SPLITTER

INPUT

OUTPUT

Quick Installation Guide 7

B. Ethernet Connections

Computers using the Ethernet connection require an Ethernet adapter installed

and a wired connection to the SBG1000.

1If you purchased your Ethernet adapter separately, install the Ethernet

hardware and driver software according to the manufacturer's instructions.

2Plug one end of the Ethernet cable into the Ethernet port on the computer.

3Plug the other end into the ETHERNET port on the SBG1000 or an Ethernet

hub or switch connected to the SBG1000, as shown in the illustrated

sample LAN.

4Restart your computer to obtain an IP address. Follow the instructions in

the SBG1000 User Guide.

Sample Ethernet LAN

RESET

POWER 321 4 5

POWER

321 4 5

Add additional hubs or switches for further expansion.

You can connect up to 255 computers to Ethernet hubs or switches connected to

the SBG1000. Detailed information about network cabling is beyond the scope

of this document or the SBG1000 User Guide.

8Wireless Cable Modem Gateway SBG1000

C. USB Connection

You can connect one PC running Windows 98, Windows Me, Windows 2000,

or Windows XP to the SBG1000 USB port. The USB connection requires

special driver software supplied on the SBG1000 Installation CD-ROM.

1Insert the SBG1000 Installation CD-ROM into the CD-ROM drive. Be sure

the SBG1000 is not connected to your PC.

2Connect the SBG1000 to the cable TV system as described in Section A.

3Install the USB driver software and restart your PC.

4Connect the USB cable to the USB port on the SBG1000. Connect its other

end to the USB port on the PC.

RESET

5 4

If you experience problems with the USB connection, uninstall the USB driver

following the instructions in the SBG1000 User Guide.

Quick Installation Guide 9

D. Wireless Network Setup

Computers using the wireless connection require a compatible wireless adapter

installed. The adapter type depends on whether the computer has a USB port,

PCI slot, or credit-card-sized PCMCIA slot.

To provide an initial wireless connection to your network and the Internet:

1Connect the SBG1000 to the cable TV system as described in Section A.

2On each wireless client computer, install the wireless adapter hardware and

driver software according to the manufacturer's instructions.

3On each wireless client computer, set up a wireless adapter profile to

“connect” the client to the SBG1000. The procedure depends on your

wireless adapter and computer operating system.

In your initial profile, use the SBG1000 default wireless Network Name

(ESSID) motorola (case-sensitive).

Your computers are connected but not secure.

The default SBG1000 settings provide no wireless security. After

your wireless LAN is operational, be sure to enable security as

described in “Setting Up the Wireless LAN” in the SBG1000

User Guide.

10 Wireless Cable Modem Gateway SBG1000

E. Start the SBG1000 Setup Program

1On a computer wired to the SBG1000 USB or Ethernet port, open your web

browser (for example, Microsoft Internet Explorer or Netscape

Navigator®).

2Type http//:192.168.100.1 and press ENTER to display the login window:

3In the User ID field, type admin (case sensitive) and press TAB.

4In the Password field, type motorola (case sensitive) and click Log In to

display the SBG1000 Setup Program main window:

Autres manuels pour SURFBOARD SBG1000

Table des matières

Autres manuels Motorola Modem

Motorola

Motorola SB5101 - SURFboard - 30 Mbps Cable Modem Manuel utilisateur

Motorola

Motorola SB4200 - SURFboard - 38 Mbps Cable Modem Manuel utilisateur

Motorola

Motorola SB5100 - SURFboard - 38 Mbps Cable Modem Manuel du propriétaire

Motorola

Motorola SB5100 - SURFboard - 38 Mbps Cable Modem Manuel utilisateur

Motorola

Motorola SURFboard SB4101 Manuel utilisateur

Motorola

Motorola MG8702 Manuel utilisateur

Motorola

Motorola SBG1000 Manuel utilisateur

Motorola

Motorola SB4200 - SURFboard - 38 Mbps Cable Modem Manuel utilisateur

Motorola

Motorola SURFboard SB3500 Manuel utilisateur

Motorola

Motorola SURFboard SB6180 Manuel utilisateur

Motorola

Motorola SURFboard SB6121 Manuel utilisateur

Motorola

Motorola SURFboard SBG900 Manuel utilisateur

Motorola

Motorola im240 - Wireless PC Card Modem Manuel utilisateur

Motorola

Motorola SURFboard SB4200E Manuel utilisateur

Motorola

Motorola DDS/MR64 Manuel du propriétaire

Motorola

Motorola SB4200 - SURFboard - 38 Mbps Cable Modem Manuel utilisateur

Motorola

Motorola VML750 Manuel utilisateur

Motorola

Motorola Premium Motorola 3347 Manuel utilisateur

Motorola

Motorola 3260FAST Manuel utilisateur

Motorola

Motorola SB5100 Series Manuel utilisateur

Motorola

Motorola SURFboard SBV5222 Manuel du propriétaire

Motorola

Motorola SURFboard SB6141 DOCSIS 3.0 Manuel utilisateur

Motorola

Motorola MG7700 Manuel utilisateur

Motorola

Motorola iM1000 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur