Motorola NETOPIA 2210-02 Manuel utilisateur

User Manual

The Motorola Netopia®2210-02

ADSL2+ Gateway

Single-port Ethernet

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS – POWER SUPPLY INSTALLATION.

Connect the power supply cord to

the power jack on the Motorola Modem. Plug the power supply into an appropriate electrical outlet.

CAUTION:

Depending on the power supply provided with the product, either the direct plug-in power supply blades, power sup-

ply cord plug or the appliance coupler serves as the mains power disconnect. It is important that the direct plug-in power supply,

socket-outlet or appliance coupler be located so it is readily accessible.

(Sweden)

Apparaten skall anslutas till jordat uttag när den ansluts till ett nätverk

(Norway)

Apparatet må kun tilkoples jordet stikkontakt.

TELECOMMUNICATION INSTALLATION.

When using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of fire, electric shock and injury to persons, including the follow-

ing:

• Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or

near a swimming pool.

• Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock

from lightning.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

PRODUCT VENTILATION.

The Motorola Modem is intended for use in a consumer's home. Ambient temperatures around

this product should not exceed 104°F (40°C). It should not be used in locations exposed to outside heat radiation or trapping of its

own heat. The product should have at least one inch of clearance on all sides except the bottom when properly installed and should

not be placed inside tightly enclosed spaces unless proper ventilation is provided.

SAVE THESE INSTRUCTIONS

Motorola Part Number:

6180206-00-01

transformation or adaptation) without written permission from Motorola, Inc.

Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to pro-

vide notiﬁcation of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not lim-

ited to, the implied warranties of merchantability and ﬁtness for a particular purpose. Motorola may make improvements or changes in the product(s)

described in this manual at any time. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Ofﬁce. Microsoft, Windows, Win-

dows Me, and Windows NT are either trademarks or registered trademarks of Microsoft Corporation in the U.S and/or other countries. Macintosh is a reg-

istered trademark of Apple, Inc. Firefox is a registered trademark of the Mozilla Foundation. All other product or service names are the property of their

respective owners.

Safety Information

ENGLISH

Thank you for selecting the Motorola Netopia

2210-02 ADSL2+ Gateway. This guide will help you set

up and conﬁgure your network.

Check your package contents. It should contain the items shown here:

If you don’t have everything, contact your supplier immediately.

Checklist

Motorola Modem User Manual

Power

Supply

Yellow RJ-45

Ethernet Cable

Gray RJ-11

Phone Cable

CD and

Wallmount Template

ENGLISH

Note:

Macintosh users: skip to Step #2 below.

1. Windows users: Insert the Motorola Netopia CD into your CDROM drive. The

Installation Guide Wizard should start automatically and the Welcome screen

should appear to step through your connection installation(s).

The Motorola Netopia Installation Guide Wiz-

ard automates several tasks to get you up and

running easily. Run the Wizard on every Win-

dows-based PC that will connect to your net-

work.

Click the

button.

Follow the on-screen instructions to make all

of your connections.

2. Locate the Modem near a power source, a DSL wall outlet, and in a location

where air can circulate freely around it.

3. Connect the rounded end of the power supply to the power jack on the back panel

of the Modem. Then, plug the power supply into an electrical outlet.

The

Power

LED should light solid green.

4. Connect one end of the gray RJ-11 Phone cable to the port labeled “DSL” on the

Modem. Connect the other end of the Phone cable to your DSL wall outlet.

Connections

ENGLISH

5. Connect one end of the yellow RJ-45 Ethernet cable to the port labeled “Ethernet”

on the modem. Connect the other end of the Ethernet cable to the Ethernet port on

your PC.

Rear View Ethernet

Port

DSL Port

ENGLISH

When all of your connections are made, the status LEDs on the front of your Motorola Modem

will light, according to the following diagram:

Power -

Ethernet -

Off = No device connected or

Top View

Solid green = Device connected.

Solid Green = Power on

Solid green = DSL synch

DSL -

Internet -

Solid green = Connected to Internet

Off = Power off

Flashing Red = Power On/Self Test

Solid Red = PO/ST Failure

modem power is off

Off = Modem power off

Flashing green = DSL attempting synch

Flashing green/red = DSL fails to synch 3 times

Flashing red = No DSL signal

Off = Bridge mode or

modem power is off

Flashing green = Attempting PPP

connection

Red = Connection failed

ENGLISH

You can access the Web-based conﬁguration pages at any time as follows:

1. Run a Web browser, such as Firefox, Safari, or Microsoft Internet Explorer, and

enter

http://192.168.1.254

in the URL Address text box.

Press Return.

Note:

You may be prompted to select your language preference. If prompted, choose a

language to continue.

2. For security purposes you must create a password for your Gateway. Enter a new

password, repeat it, and click the Next button.

Device Conﬁguration

ENGLISH

You must log in to the Modem. The default User name is

admin

. Enter the Password you just created. Type these

in their respective ﬁelds and click

3. You will be asked to log in with a User ID and Password.

The User ID and Password are supplied

by your Service Provider.

Type these in their respective ﬁelds and

click the

Connect

button.

Congratulations!

Your connection is up and running and you should be able to browse the Internet by

typing a URL address in your browser’s Address text box or by selecting any of your favorite bookmarks.

Should you require additional information, the inside pages of this Guide contain Frequently Asked

Questions (and Answers) and Basic Troubleshooting tips. The latest

Administrator’s Handbook

with

advanced conﬁguration instructions is also available on-line at:

http://www.netopia.com/support/hardware/documentation.html

ENGLISH

Your Modem serves Dynamically-assigned IP addresses by default. Be sure to conﬁgure each computer

connected to your Modem to accept a Dynamically-assigned IP address, commonly referred to as DHCP.

Microsoft Windows:

Step 1. Navigate to the

TCP/IP Properties

Control Panel.

a. Windows 98, 2000, and ME versions follow a path like this:

Start

menu ->

Settings

Control Panel

Network

(or

Network and

Dial-up Connections

Local Area Connection

Properties

) ->

TCP/IP [your_network_card]

Internet Protocol [TCP/IP]

Prop-

erties

b. Windows XP follows a path like this:

Start

menu ->

Control Panel

Network and Internet Connections

Network Connections

Local Area Connection

Properties

Internet Protocol [TCP/IP]

Properties

Step 2. Select

Obtain an IP address automatically

Step 3. Select

Obtain DNS server address automatically

, if available.

Step 4. Remove any previously conﬁgured Gateways, if available.

Step 5. OK the settings. Restart if prompted.

Client Conﬁguration

ENGLISH

c. Windows Vista is set to obtain an IP address automatically by default. You may not need to conﬁgure

it at all.

To check, open the

Networking

Control Panel and select

Internet Protocol Version 4 (TCP/IPv4)

Click the

Properties

button.

The

Internet Protocol Version 4

(TCP/IPv4) Properties

window

should appear as shown.

If not, select the radio buttons shown

above, and click the

button.

Autres manuels pour NETOPIA 2210-02

Table des matières

Autres manuels Motorola Porte

Motorola

Motorola VT2000 Manuel utilisateur

Motorola

Motorola SURFboard SBG900 Manuel utilisateur

Motorola

Motorola Netopia 2200 Manuel utilisateur

Motorola

Motorola SURFboard SVG1202 Manuel utilisateur

Motorola

Motorola SBG6580 Series Manuel utilisateur

Motorola

Motorola SURFboard SVG1501 Manuel utilisateur

Motorola

Motorola NETOPIA 2247/57-62 Manuel utilisateur

Motorola

Motorola 2247-62-10NA - Netopia 2247-62 Wireless... Manuel utilisateur

Motorola

Motorola SURFboard SBG6580 Manuel utilisateur

Motorola

Motorola HH1620 Manuel utilisateur

Motorola

Motorola SURFboard SBG901 Manuel utilisateur

Motorola

Motorola SVG2500 SURFBOARD DIGITAL VOICE WIRELESS GATEWAY - annexe... Manuel de formation

Motorola

Motorola SVG2500 SURFBOARD DIGITAL VOICE WIRELESS GATEWAY - annexe... Guide de démarrage rapide

Motorola

Motorola RSGu3502 Manuel utilisateur

Motorola

Motorola Netopia 2247-N8 Manuel utilisateur

Motorola

Motorola AT&T NVG589 Manuel utilisateur

Motorola

Motorola NETOPIA 2210-02 ADSL2-RESIDENTIAL GATEWAY -... Manuel utilisateur

Motorola

Motorola RG2200 Manuel utilisateur

Motorola

Motorola RSGu3502 Manuel utilisateur

Motorola

Motorola RG2400 Manuel utilisateur

Motorola

Motorola Netopia 7347-84 Manuel utilisateur

Motorola

Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP Manuel utilisateur

Motorola

Motorola NETOPIA 2210-02 ADSL2-RESIDENTIAL GATEWAY -... Manuel utilisateur

Motorola

Motorola VT2442 - VONAGE Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur