Mitsubishi Electric MELDAS 60 Series Manuel utilisateur

MELDAS is a registered trademark of Mitsubishi Electric Corporation.

Other company and product names that appear in this manual are trademarks or

registered trademarks of the respective companies.

PREFACE

This manual is the alarm/parameter guide required to use the MELDAS60/60S Series.

This manual is prepared on the assumption that your machine is provided with all of the MELDAS60/60S

Series functions. Confirm the functions available for your NC before proceeding to operation by referring

to the specification issued by the machine manufacturer.

* The "MELDAS60 Series" includes the M64A, M64, M65, M66 and M65V.

* The "MELDAS60S Series" includes the M64AS, M64S, M65S and M66S.

Notes on Reading This Manual

(1) This manual explains general parameters as viewed from the NC.

For information about each machine tool, refer to manuals issued from the machine manufacturer.

If the descriptions relating to “restrictions” and “allowable conditions” conflict between this manual

and the machine manufacturer's instruction manual, the later has priority over the former.

(2) This manual is intended to contain as much descriptions as possible even about special operations.

The operations to which no reference is made in this manual should be considered impossible.

(3) The “M64D system” explained in this manual includes the M64AS, M64S, M65S and M66S.

(4) The “special display unit” explained in this manual is the display unit incorporated by the machine

manufacturer, and is not the MELDAS standard display unit.

Caution

If the descriptions relating to the “restrictions” and “allowable conditions” conflict

between this manual and the machine manufacturer’s instruction manual‚ the latter has

priority over the former.

The operations to which no reference is made in this manual should be considered

impossible.

This manual is complied on the assumption that your machine is provided with all

optional functions. Confirm the functions available for your machine before proceeding

to operation by referring to the specification issued by the machine manufacturer.

In some NC system versions‚ there may be cases that different pictures appear on the

screen‚ the machine operates in a different way or some function is not activated.

Precautions for Safety

Always read the specifications issued by the machine maker, this manual, related manuals and attached

documents before installation, operation, programming, maintenance or inspection to ensure correct use.

Understand this numerical controller, safety items and cautions before using the unit.

This manual ranks the safety precautions into "DANGER", "WARNING" and "CAUTION".

DANGER When the user may be subject to imminent fatalities or major injuries if handling is

mistaken.

WARNING When the user may be subject to fatalities or major injuries if handling is mistaken.

CAUTION When the user may be subject to injuries or when physical damage may occur if

handling is mistaken.

Note that even items ranked as " CAUTION", may lead to major results depending on the situation. In

any case, important information that must always be observed is described.

DANGER

Not applicable in this manual.

WARNING

Not applicable in this manual.

CAUTION

1. Items related to product and manual

If the descriptions relating to the “restrictions” and “allowable conditions” conflict between this

manual and the machine manufacturer’s instruction manual‚ the latter has priority over the former.

The operations to which no reference is made in this manual should be considered impossible.

This manual is complied on the assumption that your machine is provided with all optional

functions. Confirm the functions available for your machine before proceeding to operation by

referring to the specification issued by the machine manufacturer.

In some NC system versions‚ there may be cases that different pictures appear on the screen‚

the machine operates in a different way on some function is not activated.

2. Items related to faults and abnormalities

If the BATTERY LOW alarm is output, save the machining programs, tool data and parameters

to an input/output device, and then replace the battery. If the BATTERY alarm occurs, the

machining programs, tool data and parameters may be damaged. After replacing the battery,

reload each data item. [Continued on next page]

CAUTION [Continued]

3. Items related to maintenance

Do not replace the battery while the power is ON.

Do not short-circuit, charge, heat, incinerate or disassemble the battery.

Dispose of the spent battery according to local laws.

4. Items related to servo parameters and spindle parameters

With the MDS-C1 Series, only the serial encoder is compatible as the motor end detector. The

OHE/OHA type detector cannot be used as the motor end detector.

Do not adjust or change the parameter settings greatly as operation could become unstable.

In the explanation on bits, set all bits not used, including blank bits, to “0”.

Disposal

(Note) This symbol mark is for EU countries only.

This symbol mark is according to the directive 2006/66/EC Article 20 Information for end-

users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and

components which can be recycled and/or reused.

This symbol means that batteries and accumulators, at their end-of-life, should be disposed of

separately from your household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the

battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as

follows:

Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used batteries and accumulators.

Please, dispose of batteries and accumulators correctly at your local community waste collection/

recycling centre.

Please, help us to conserve the environment we live in!

Autres manuels pour MELDAS 60 Series

Ce manuel convient aux modèles suivants

Autres manuels Mitsubishi Electric Unité de contrôle

Mitsubishi Electric

Mitsubishi Electric QJ71MB91 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R C Manuel du propriétaire

Mitsubishi Electric

Mitsubishi Electric WS0-CPU000200 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric GT1055-QSBD Instructions d'utilisation et d'entretien

Mitsubishi Electric

Mitsubishi Electric FR-A7AY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MN Converter Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PMFY-P-NBMU-ER5 Manuel d'installation et d'exploitation

Mitsubishi Electric

Mitsubishi Electric GT1020-LBD Instructions d'utilisation et d'entretien

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F Series Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric GOT 1000 Series Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric EMU4-CNT-MB Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric FX-USB-AW Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric WD8700U Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric AJ65BT-D62 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q68AD-G Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric EMU4-CNT-MB Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric AJ65VBTCU-68ADVN Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric NZ2FTGN Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric FR-A7NL Guide de configuration

Mitsubishi Electric

Mitsubishi Electric A1S64TCTT-S1 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric AJ65FBTA2-16TEU Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric GT16H-CNB-42S Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MELSEC-F FX2N-1HC Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur