Metrologic MS1633 FocusBT Manuel utilisateur

METROLOGIC INSTRUMENTS, INC.

MS1633 FocusBT

™

Bluetooth

Enabled

Area Imaging Bar Code Scanner

Installation and User’s Guide

work may be reproduced, transmitted, or stored in any form or by any means

without prior written consent, except by reviewer, who may quote brief

passages in a review, or provided for in the Copyright Act of 1976.

Trademarks

Metrologic is a registered trademark of Metrologic Instruments,

Inc. Products identified in this document are hereby acknowledged as

trademarks, registered or otherwise, of Metrologic Instruments, Inc. or their

respective companies.

ABLE OF

ONTENTS

Introduction

Product Overview ............................................................................................. 1

Scanner and Accessories................................................................................. 2

Scanner Components....................................................................................... 3

Labels............................................................................................................... 4

Maintenance..................................................................................................... 4

Getting Started

Battery Tips and Cautions ................................................................................ 5

Charger Status Indicators................................................................................. 5

Charging the Battery ........................................................................................ 6

Battery Installation............................................................................................ 7

Low Battery Warning ........................................................................................ 7

Removing the Battery for Charging .................................................................. 7

Driver Installation

Driver Installation for Bluetooth USB Adapter................................................... 8

Auto Reconnect Driver Setup......................................................................... 11

FocusBT Connection Configuration................................................................ 13

Establishing Bluetooth Communication

When FocusBT Acts as a Server to Other Bluetooth Devices........................ 15

When FocusBT Acts as a Client to Other Bluetooth Devices ......................... 16

When FocusBT is Used with an MS9535 Cradle............................................ 17

Range Gate Mode .......................................................................................... 17

Inventory Mode............................................................................................... 18

Stand Kits

Stand Components, MLPN 46-00147............................................................. 19

Hard Mounting the Stand................................................................................ 20

Assembling the Stand .................................................................................... 21

iii

ABLE OF

ONTENTS

Scanner Operation

Two Default Modes of Operation.................................................................... 22

Audible Indicators........................................................................................... 23

Visual Indicators ............................................................................................. 24

Failure Modes................................................................................................. 25

Depth of Field by Minimum Bar Code Element Width .................................... 26

IR Activation Range........................................................................................ 27

Troubleshooting Guide ....................................................................................... 28

Design Specifications ......................................................................................... 32

Default Settings – Communication Parameters.................................................. 34

Configuration Modes .......................................................................................... 36

Upgrading the Flash ROM Firmware.................................................................. 36

Limited Warranty ................................................................................................ 37

Regulatory Compliance

Safety ............................................................................................................. 38

EMC ............................................................................................................... 39

Patents ............................................................................................................... 41

Index .................................................................................................................. 42

NTRODUCTION

Product Overview

FocusBT™ is the Bluetooth enabled Area Imager that outperforms the

competition by integrating advanced features to both hand-held and presentation

mode scanning such as FirstFlash

scanning, automatic aim line, object

detection and RangeGate

to optimize efficiency and productivity while providing

the freedom of mobility.

FocusBT has been designed with a removable battery pack for remote charging

to decrease down time caused by having a dead battery. Two battery packs are

supplied so the user can simultaneously scan while remotely charging the spare

battery. The benefits of this feature are 24/7 scanning and increased throughput

for all enterprise applications.

FocusBT is the industry leader in Area Imaging and the added benefits of

Bluetooth along with a rich feature set, make it the scanner of choice for 2D

wireless applications.

FocusBT

™Interface

MS1633 – 5 BT Interface 1.2

Bluetooth Profile Supported: SPP (Serial Port Profile)

NTRODUCTION

Scanner

and

Accessories

ASIC

Part # Description Qty.

MS1633 MS1633 FocusBT Area Imaging Bar Code Scanner 1

70-72018 Li-Ion Battery Pack 2

46-00358 Battery Charger 1

00-05176 USB BT adaptor 1

00-02544 MetroSelect

Single-Line Configuration Guide* 1

00-02281 Supplemental Configuration Guide* 1

46-00374 Software CD 1

00-02280 MS1633 FocusBT Installation and User’s Guide* 1

Available on the Metrologic website - www.metrologic.com

PTIONAL

CCESSORIES

Part # Description

AC to DC Power Transformer - 5.2VDC @ 2 A output.

46-46915 120V United States

46-46913 220V-240V Continental European

46-46912 220V-240V United Kingdom

46-46914 220V-240V Australia

46-46911 220V-240V China

00-02001 MS1633 Focus Stand (46-00147) Installation Guide

46-00147 Modular Presentation Stand

Other items may be ordered for the specific protocol being used. To order additional items,

contact the dealer, distributor or call Metrologic’s Customer Service Department at

1-800-ID-METRO or 1-800-436-3876.

NTRODUCTION

Scanner and Charger Components

Figure 1. Scanner and Charger Components

Item Description

1 Yellow LED See Visual Indicators (on page 24)

2 White LED See Visual Indicators (on page 24)

3 Blue LED See Visual Indicators (on page 24)

4 Speaker See Audible Indicators (on page 23)

5 Trigger

6 Red Window LED Aperture

7 Power Button See Charging the Battery (on page 7)

8 Blue Power LED See Charging the Battery (on page 6)

9 Battery Pack See Battery Installation (on page 7)

10 Lock See Battery Installation (on page 7)

11 Power Jack See Battery Installation (on page 7)

12 Charging Contacts See Battery Installation (on page 6)

13 Blue Power LED See Charger Status Indicators (on page 5)

14 White Charge LED See Charger Status Indicators (on page 5)

NTRODUCTION

Labels

Each scanner has a label located on the underside of the head. This label

provides the unit’s model number, date of manufacture, serial number, CE and

caution information. The charger, the Bluetooth USB Adapter and the battery

also have labels with important safety and compliance information. The following

figure provides examples of these labels and their locations.

Figure 2. Label Locations and Samples

Caution:

To maintain compliance with applicable standards, all circuits connected to the scanner must

meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC 60950-1.

To maintain compliance with standard CSA-C22.2 No. 60950-1/UL 60950-1 and norm

EN/IEC 60950-1, the power source should meet applicable performance requirements for a

limited power source.

Maintenance

Smudges and dirt can interfere with the proper scanning of a bar code.

The output window should be routinely cleaned with glass cleaner sprayed onto a

lint free, non-abrasive cleaning cloth.

ETTING

TARTED

Battery Tips and Cautions

Before the FocusBT can be placed in operation the battery pack must be

charged for a minimum of 8 hours. After the initial preparation charge of 8 hrs,

the battery will only require 6 hrs to come to a full charge when it gives a Low

Battery warning (see page 7). Follow the steps on page 6 to fully charge the

battery.

Once charged, the unit is able to handle 5400 continuous first pass readings over

a period of approximately 9 hours. After 30 seconds of no activity the scanner

will go into a sleep mode to conserve battery life.

Caution

Observe proper precautions when handling batteries.

Batteries may leak or explode if improperly handled. Observe the following

precautions when handling batteries for use in this product:

•Be sure the battery is turned off before replacing the battery.

•Be sure the battery is turned off when installed in the charger.

•Use only batteries approved for use in this equipment.

Do not mix old and new batteries or batteries of different types.

•Do not attempt to insert the battery upside down or backwards.

•Do not short or disassemble the battery.

•Do not expose the battery to flame or excessive heat.

•Do not immerse the battery in water or expose it to water.

•Do not transport or store with metal objects such as necklaces or hairpins.

•Batteries are prone to leakage when fully discharged.

To avoid damage to the product, be sure to remove the battery when no

charge remains.

•When not in use store the battery in a cool dry place.

•Discontinue use immediately should you notice any changes in the

battery, such as discoloration or deformation.

•Please recycle used batteries in accord with local regulations.

Charger Status Indicators

There are two status indicators on the front of the charger located under the

Metrologic Logo. The following table lists how these indicators will illuminate

depending on the status of the charger.

HARGER

TATUS

LUE

LED

(PW) W

HITE

LED

(CH)

Charging On Blinking

Fully Charging On Solid

Power On On OFF

Power Off OFF OFF

Figure 3

ure 4

Figure 5

Figure 6

ETTING

TARTED

Charging the Battery

Before the FocusBT can be placed in operation for the first time, the battery

must be charged for a minimum of 8 hours. After the initial preparation

charge of 8 hrs, the battery will only require 6 hrs to come to a full charge when it

gives a Low Battery warning (see page 7).

1. Check the AC input requirements of the

power supply to make sure the voltage

matches the AC outlet. The outlet

should be located near the charger and

easily accessible.

2. Plug the power supply into the socket

on the back of the charger.

A blue PW will illuminate near the

Metrologic Logo indicating the charger is

receiving power.

3. Verify that the battery pack is not ON.

The blue power LED on the battery pack

should be OFF.

Warning!

Damage to the battery pack

can occur if it is charged while

turned ON.

4. Insert the battery pack into the charger

as shown in Figure 5.

A white CH will start to flash on and off

on the charger near the Metrologic logo.

If the white CH does not appear,

check to make sure the battery pack

is seated all the way in the charger

with the battery contacts facing the

contacts on the charger.

5. When the battery is completely

charged the charging indicator

(CH) will stop flashing and stay

illuminated.

Autres manuels pour MS1633 FocusBT

Table des matières

Autres manuels Metrologic Lecteur de codes-barres

Metrologic

Metrologic MS700i Manuel utilisateur

Metrologic

Metrologic MS6130 Manuel utilisateur

Metrologic

Metrologic MK9535-79C5M38 - Metrologic MS9535 VoyagerBT Manuel utilisateur

Metrologic

Metrologic FocusE IS1650 Manuel utilisateur

Metrologic

Metrologic MS6130 Manuel utilisateur

Metrologic

Metrologic IS4320-41 ScanKey Manuel utilisateur

Metrologic

Metrologic MS7620 Manuel utilisateur

Metrologic

Metrologic MS9530 Series Manuel utilisateur

Metrologic

Metrologic MS7320 InVista Series Manuel utilisateur

Metrologic

Metrologic MS9530 Series Manuel utilisateur

Metrologic

Metrologic Genesis MS7580 Manuel du propriétaire

Metrologic

Metrologic MS1633 FocusBT Manuel utilisateur

Metrologic

Metrologic Hand-Held Scanner Manuel utilisateur

Metrologic

Metrologic MS9590 VOYAGERGS series Manuel utilisateur

Metrologic

Metrologic MS7320 InVista Series Manuel utilisateur

Metrologic

Metrologic MK1690-61A38 Manuel utilisateur

Metrologic

Metrologic StratosS MS2220 Manuel utilisateur

Metrologic

Metrologic QuantumT MS3580 Manuel utilisateur

Metrologic

Metrologic MS 1690 Focus Series Manuel utilisateur

Metrologic

Metrologic IS3480 QuantumE Manuel utilisateur

Metrologic

Metrologic MH941 Manuel utilisateur

Metrologic

Metrologic MS1890 Focus Manuel utilisateur

Metrologic

Metrologic MS5100 Eclipse Series Manuel utilisateur

Metrologic

Metrologic MK1690-61A38 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur