Metrologic MS 1690 Focus Series Manuel utilisateur

METROLOGIC INSTRUMENTS, INC.

MS1690 Focus™

Area Imaging Bar Code Scanner

Installation and User’s Guide

00-02098_Cover_Quark_March_2005.qxd 3/11/2005 9:31 AM Page 1

work may be reproduced, transmitted, or stored in any form or by any means

without prior written consent, except by reviewer, who may quote brief

passages in a review, or provided for in the Copyright Act of 1976.

Products and brand names mentioned in this document are trademarks of

their respective companies.

TABLE OF CONTENTS

Introduction ............................................................................................................1

Scanner and Accessories ..................................................................................2

Scanner Components ........................................................................................4

The PowerLink Cable ........................................................................................5

Labels ................................................................................................................6

Maintenance ......................................................................................................6

Installing the Scanner to the Host System

RS232 MS1690-14 ............................................................................................7

Keyboard Wedge MS1690-47 ...........................................................................8

Stand Alone Keyboard MS1690-47 ...................................................................9

IBM MS1690-11...............................................................................................10

Full Speed USB MS1690-40 (Integrated)........................................................11

Low Speed USB MS1690-38 (Integrated) .......................................................11

Stand Kits

Stand Components, MLPN 46-00147..............................................................12

Hard Mounting the Stand.................................................................................13

Assembling the Stand......................................................................................14

Scanner Operation

Two Default Modes of Operation.....................................................................15

Audible Indicators ............................................................................................16

Visual Indicators ..............................................................................................17

Failure Modes ..................................................................................................18

Depth of Field by Minimum Bar Code Element Width .....................................19

IR Activation Range .........................................................................................20

Troubleshooting Guide ........................................................................................21

Design Specifications ..........................................................................................25

Applications and Protocols ..................................................................................27

Default Settings – Communication Parameters...................................................28

Configuration Modes............................................................................................32

Upgrading the Flash ROM Firmware ...................................................................33

iii

TABLE OF CONTENTS

Scanner and Cable Terminations

Scanner Pinout Connections .......................................................................... 34

Cable Connector Configurations .................................................................... 36

Limited Warranty ................................................................................................ 38

Product Safety

Notices ........................................................................................................... 39

Cautions ......................................................................................................... 40

Patents ............................................................................................................... 41

Index .................................................................................................................. 42

Contact Information and Office Locations........................................................... 45

INTRODUCTION

The MS1690 Focus is a high performance hand-held area imaging bar code

scanner that utilizes high-resolution CMOS imaging sensors for superior image

quality. Focus utilized Omniplanar, Inc.’s Swiftdecoder™ software, for reliable

decoding of both 1D and 2D bar code symbologies. Sharp images can be

captured and transmitted in a variety of outputs including: .jpg, .bmp, and .tiff.

Omnidirectional scanning capabilities and an extended depth of field width

provides aggressive scanning of all standard 1D, RSS, PDF417, microPDF,

Composite, Matrix and Postal Codes symbology types. Firmware updates are

easily loaded via Flash ROM.

Focus provides an extended depth of field width and a built in object detection

sensor (IR) that instantly turns on the scanner when an object is presented within

the scanner’s field of view. Automatic in-stand detection switches the scanner to

a “presentation” mode for convenient in-stand scanning. Focus incorporates

Metrologic’s patented CodeGate®technology for accurate menu style scanning

and on command data transmission.

Focus™Interface

MS1690 – 11 IBM 468X/469X, RS232-TXD, RXD, RTS, CTS

MS1690 – 14 RS232 (TX, RX, RTS, CTS, DTR)

MS1690 – 38 Low Speed USB

MS1690 – 40 Full Speed USB

MS1690 – 47 Keyboard Wedge, Stand-Alone Keyboard and

RS232 Transmit/Receive

INTRODUCTION

Scanner and Accessories

BASIC KIT

Part # Description

MS1690 Focus Area Imaging Bar Code Scanner

00-02544 MetroSelect®Single-Line Configuration Guide*

00-02065 Supplemental Configuration Guide*

00-02098 MS1690 Focus Area Imaging Bar Code Scanner

Installation and User’s Guide*

* Available on the Metrologic website - www.metrologic.com

OPTIONAL ACCESSORIES

Part # Description

AC to DC Power Transformer - Regulated 5.2VDC @ 650 mA output.

45-45593 120V United States

45-45591 220V-240V Continental European

45-45592 220V-240V United Kingdom

46-46803 220V-240V Australia

46-46983 220V-240V China

53-53000-3 RS232 PowerLink Cable with Built in Power Jack

2.7 m (9 ft.) coiled cord, long strain relief, black

53-53002-3 Keyboard Wedge PowerLink Cable with Adapter Cable

2.7 m (9 ft.) coiled cord, long strain relief, black

53-53020-3 Stand Alone Keyboard PowerLink Cable

2.7 m (9 ft.) coiled cord, long strain relief, black

Other items may be ordered for the specific protocol being used. To order additional items,

contact the dealer, distributor or call Metrologic’s Customer Service Department at

1-800-ID-METRO or 1-800-436-3876.

INTRODUCTION

Scanner and Accessories

OPTIONAL ACCESSORIES

Part # Description

53-53213x-N-3 USB Power/Communication Cable,

2.7 m (9 ft.) coiled cord, long strain relief, black

53-53214x-N-3

USB Power/Communication Cable,

4.5 m (15 ft.) coiled cord, long strain relief, black

This cable is for use with full speed

USB (-40) interface only.

53-53235x-N-3 Low Speed USB Non-Locking Communication Cable

2.7 m (9 ft.) coiled cord, long strain relief, black

MVC-2MPC-IB9 Metrologic Voltage Converter (MVC) Cable*

±12VDC to +5.2VDC

* Contact a Metrologic customer service representative for additional

information on the MVC cable series and the host connections available.

00-02001 MS1690 Focus Stand (46-00147) Installation Guide

46-00147 Modular Presentation Stand

Other items may be ordered for the specific protocol being used. To order additional items,

contact the dealer, distributor or call Metrologic’s Customer Service Department at

1-800-ID-METRO or 1-800-436-3876.

INTRODUCTION

Scanner Components

Figure 1. Scanner Components

Item Description

1 Yellow LED See Visual Indicators (on page 17)

2 White LED See Visual Indicators (on page 17)

3 Blue LED See Visual Indicators (on page 17)

4 Speaker See Audible Indicators (on page 16)

5 Trigger

6 Red Window LED Aperture

7 Cable Release See The PowerLink Cable (on page 5)

8 Cable Connection 10-pin RJ45, Female Socket,

See Scanner Pinout Connections (on page 34)

INTRODUCTION

THE POWERLINK CABLE

CONNECTING

Important: If the PowerLink cable is not fully ‘latched’ the unit can

power intermittently.

Figure 2. Figure 3.

DISCONNECTING

Before removing the cable from the scanner, Metrologic recommends that the

power on the host system is off and the power supply has been disconnected

from the PowerLink cable.

Figure 4. Releasing the PowerLink Cable

1. Locate the small ‘pin-hole’ on the handle of the unit near the cable.

2. Bend an ordinary paperclip into the shape shown above.

3. Insert the paperclip (or other small metallic pin) into the small ‘pin-hole’.

4. You will here a faint ‘click’. Pull gently on the strain-relief of the

PowerLink cable to remove the cable from the unit.

INTRODUCTION

Labels

Each scanner has a label located on the underside of the head. This label

provides the unit’s model number, date of manufacture, serial number, CE and

caution information. The following figure gives an example of the label and its

location.

Figure 5. Label Samples and Location

Maintenance

Smudges and dirt can interfere with the proper scanning of a bar code.

Therefore, the output window will need occasional cleaning.

1. Spray glass cleaner onto lint free, non-abrasive cleaning cloth.

2. Gently wipe the scanner window.

Autres manuels pour MS 1690 Focus Series

Table des matières

Autres manuels Metrologic Lecteur de codes-barres

Metrologic

Metrologic MS6720 Manuel utilisateur

Metrologic

Metrologic TwinScan IS220 Manuel utilisateur

Metrologic

Metrologic MS 1690 Focus Series Manuel utilisateur

Metrologic

Metrologic FocusE IS1650 Manuel utilisateur

Metrologic

Metrologic MS1633 FocusBT Manuel utilisateur

Metrologic

Metrologic MS860 Manuel utilisateur

Metrologic

Metrologic MS7600 Manuel utilisateur

Metrologic

Metrologic MetroSelect Manuel utilisateur

Metrologic

Metrologic MS6720 Manuel utilisateur

Metrologic

Metrologic 1070 Manuel utilisateur

Metrologic

Metrologic MS9530 Series Manuel utilisateur

Metrologic

Metrologic MS7120 Series Manuel utilisateur

Metrologic

Metrologic Hand-Held Scanner Manuel utilisateur

Metrologic

Metrologic MS7120 Orbit Manuel utilisateur

Metrologic

Metrologic MS7120 Orbit Manuel utilisateur

Metrologic

Metrologic MS7120 Orbit Manuel utilisateur

Metrologic

Metrologic Stratos MS2422 Manuel utilisateur

Metrologic

Metrologic MS860i Mini-Slot Manuel utilisateur

Metrologic

Metrologic IS4225 ScanGlove Manuel utilisateur

Metrologic

Metrologic MS7600 Manuel utilisateur

Metrologic

Metrologic MS9530 Series Manuel utilisateur

Metrologic

Metrologic Cubit MS6520 Series Manuel utilisateur

Metrologic

Metrologic MS9520 Voyager Manuel utilisateur

Metrologic

Metrologic MS2020 Stratos Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur