LINSHANG LS110 Manuel utilisateur

Shenzhen Linshang Technology Co., Ltd.

1-3-2019 Page 1 of 3

LS110 split transmission meter

User Manual V8.1

LS110 is used for the transmittance testing of glass, plated film, solar film, insulating

glass, filmed glass etc.

LS110 consist of two parts: PART Ⅰ(main part) for measuring and displaying

functions; PARTⅡ(the auxiliary part) for light source and laser, the laser is used for two

part alignment.

I. LS110 Parameters

1.Dimension: 130mm × 70mm × 84mm (L × W ×

2.Weight: 630g

3.Resolution: 0.1% for measured value<10%

and 1% for other ranges

4.Accuracy: better than ±2% (Colorless and

transparent material)

5.Test sample size: > 40mm×40mm

6.Visible light wavelength: 380nm-760nm, CIE

function of photopic vision

7.Power supply: built-in lithium rechargeable battery

II．Key Operation

1．Power on/off

Short press "Power" key to power the instrument on/off，main and auxiliary part are

required to perform the operation of power on/off.

The meter is shut down automatically for no action within 15 minutes.

2. “HOLD” Key of the main part

Under the measurement mode, short press "HOLD" to hold the data on LCD, up right

corner of LCD will display the icon "HOLD" .

Short press "HOLD" again to release the hold mode and the icon "HOLD" disappears.

Long press "HOLD" for 3 seconds to 3 value display mode. Long press "HOLD" for 3

seconds again to 1 value display mode. In fact, the instrument is composed of three sets

of independent transmittance meter. 1 value mode is the mean values of three 3 value

mode.

3.”Laser”key of the auxiliary part

Short press "Laser" key to power the laser on/off，

III. Instrument operation

1. SELF-TEST

Attracting the main and auxiliary part together, press down “POWER" key to power

them respectively and align the upper and lower laser points with the alignment bull’s

eyes simultaneously. Wait for the completion of “SELF-TEST” and enter the

measurement interface(100% displayed on the LCD). The following reasons for failed

“SELF-TEST”(“Please refer to the manual” display on the LCD) :

Shenzhen Linshang Technology Co., Ltd.

1-3-2019 Page 2 of 3

a) Battery power is low, please charge the main and auxiliary part.

b) No alignment the main and auxiliary part with laser point with the bull’s eyes.

c) Power on the main and auxiliary part with clamped some testing sample

d) Equipment damage, need to send back to the factory repair

2. Measurement

Clamp the sample with the main part and the auxiliary part and align the laser point with

the bull’s eyes. The meter will display the transmittance value of the samples.

IV. Features

1. Two-parts dual mode of the main and auxiliary part facilitates the transmittance

measurement of the automobile front windshield glass and building glass.

2. The built-in lithium rechargeable battery is easy to use without replacing the battery;

3. The laser alignment function guarantees the accurate alignment of the main part with

the auxiliary part in the process of measurement and ensures accurate

measurement.

V. Battery charging

This meter has built in lithium chargeable battery and charger. Three methods can be

used for charging the meter.

1. Plug the USB line into the USB port of computer. Plug in a one-for-two plug to

charge the main and auxiliary part simultaneously.

2. Use the supporting DC 5V Adapter. Plug in a

one-for-two plug to charge the main and auxiliary

part simultaneously.

3. Use the mobile power of the smart phone for

charging.

Shenzhen Linshang Technology Co., Ltd.

1-3-2019 Page 3 of 3

VI. Points for attention

1. Since the main and auxiliary part has strong magnetic magnet inside for

measurement, avoid pinch hands or damage the glass samples in the use.

2. The laser position and accuracy of each set of meter (main and auxiliary part) has

been perfectly matched and calibrated.

3. Charge the meter promptly when the battery indicator flashes.

4. The meter may not power on due to possible low power. In such case, please charge

it for a while before starting up.

5. Please use the dedicated supporting charger.

6. In order to ensure the accuracy of the measured value, please do not expose the

meter to the direct sunlight during the use.

7. The meter uses standard 14500 lithium chargeable battery. In

case of ineffective operation of key after charging, please

open the meter with screwdriver, take out the chargeable

battery and re-install it. In case of short use after charging,

please replace the chargeable battery.

8.This product emits a laser beam from the back side of auxiliary part. DO NOT point the

laser at anyone’s eyes.

VII: Standard Packing List

No. Description Quantity Unit

1 LS110 transmission meter 1 pcs

2 User Manual 1 pcs

3 Certificate / warranty card 1 pcs

4 Charger 1 pcs

VIII: Service

1．The meter has one-year warranty. If the meter works abnormally, please

send the whole meter to the company for maintenance

2．Provide users with spare parts and lifelong maintenance services

3．Provide the users with the meter inspection service for free

4．Free technical support for long term

Manufacturer: Shenzhen Linshang Technology Co.,Ltd.

Website: www.linshangtech.com

Service hotline: 086-755-86263411

Email: [email protected]

Table des matières

Autres manuels LINSHANG Instrument de mesure

LINSHANG

LINSHANG LS126A Manuel utilisateur

LINSHANG

LINSHANG LS301 Manuel utilisateur

LINSHANG

LINSHANG LS132 Manuel utilisateur

LINSHANG

LINSHANG LS108 Manuel utilisateur

LINSHANG

LINSHANG LS120 Manuel utilisateur

LINSHANG

LINSHANG LS212 Manuel utilisateur

LINSHANG

LINSHANG LS213 Manuel utilisateur

LINSHANG

LINSHANG LS123 Manuel utilisateur

LINSHANG

LINSHANG LS251D Manuel utilisateur

LINSHANG

LINSHANG LS128 Manuel utilisateur

LINSHANG

LINSHANG LS110H Manuel technique

LINSHANG

LINSHANG LS252DL Manuel utilisateur

LINSHANG

LINSHANG LS197 Manuel utilisateur

LINSHANG

LINSHANG LS200 Manuel utilisateur

LINSHANG

LINSHANG LS182 Manuel utilisateur

LINSHANG

LINSHANG LS233 Manuel utilisateur

LINSHANG

LINSHANG LS236 Manuel utilisateur

LINSHANG

LINSHANG LS125 Manuel utilisateur

LINSHANG

LINSHANG LS192 Manuel utilisateur

LINSHANG

LINSHANG LS162 Manuel utilisateur

LINSHANG

LINSHANG LS170 Manuel utilisateur

LINSHANG

LINSHANG LS220B Manuel utilisateur

LINSHANG

LINSHANG LS191 Manuel utilisateur

LINSHANG

LINSHANG LS196 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur