LINSHANG LS108A Manuel utilisateur

Shenzhen Linshang Technology Co.,Ltd.

3-19-2018 Page 1 of 3

LS108A lens transmission meter

Instruction manual V6.1

Test principle of LS108A is to illuminate the tested transparent substance with 850nm

infrared light source, 940nm infrared light source and 550nm visible light source. Then,

the sensors respectively detect incident light intensity of three light sources and

transmission light intensity at which they transmit the tested substance. The ratio between

incident light intensity and transmission light intensity is the light transmittance, expressed

as a percentage.

I: LS108A parameter

1. Instrument size: length 200mm × width 180mm × height 106mm

2. Test hole diameter: ￠1mm

3. Gross weight: about 1.5Kg

4. Resolution: 0.1%

5. Measuring accuracy: ±2%

6. Infrared ray: peak wavelength of 850nm and peak wavelength of 940nm

7. Visible light: peak wavelength of 550nm

8. Power supply: 5V AC/DC power adapter

II: Operations

1. Power-on self-test

Plug into the power supply and turn the power switch to the ON position. The LS108A

will firstly test and calibrate itself. After completion of self-calibration, values displayed on

three displays are all “100”, which means 100% transmittance in case of no tested

substance. During Power-on self-test process, if not all of the displayed values are

Shenzhen Linshang Technology Co.,Ltd.

3-19-2018 Page 2 of 3

“100”, and characters such as “EEE”, “88.8” or “000” appear, it means the Power-on

self-test fails, which may caused by:

A: The test slot is placed with tested material before powering on the instrument.

Remove the material and then power on the instrument.

B: There may be dust in test holes. Blow the dust with air guns.

C: Ambient light is too strong.

D: Instrument malfunction. Please return the instrument to the factory.

2. Instrumental measurements

Align holes for Light and distance sensors on cell phone lens with beam hole of the

light wavelength to be tested. The transmittance parameter of tested material will be

shown on the display of corresponding wavelength.

3. Counting statistics function of PC software

With USB interface and PC software to count the quantity, qualified rate and Judge

whether the sample is good. Please refer to the PC software and instruction manual in

USB flash disk for details.

III: Features

1. Three test holes are equipped with alignment LEDs, which are used for holes

alignment on cellphone lens during testing.

2. The instrument is specially designed for testing of infrared transmittance and

visible light transmittance of cell phone lens.

3. The instrument provides real-time dynamic self-calibration and self calibrates to

100% transmittance after being powered on.

4. The minimum size of test hole is ￠1mm.

Shenzhen Linshang Technology Co.,Ltd.

3-19-2018 Page 3 of 3

5. Stainless steel work surface design, dedicated outlook, convenient for placement

of the tested material and easy to operate.

IV: Precautions

1. When the instrument tests and calibrates itself after being powered on, there should

be no tested materials in testing position. Or else, self-calibration of the instrument

fails.

2. Avoid contacting corrosive substance and keep away from high temperature and

high humidity environment.

3. When continuously in use for a long time, data on three displays may be not “100” ,

At this point, power off the instrument, and reboot it for self-testing and

self-calibration. Measuring accuracy and normal use of the instrument will not be

influenced.

4. Occasionally in case the displayed data cannot be returned to “100” when there is

no tested material on the testing position, power off and reboot the instrument.

5. Please power off the instrument when not in use.

V: Standard packing list

No. Description Quantity Unit

1 LS108A lens transmission meter 1 pcs

2 DC5V Adapter 1 pcs

3 User Manual 1 pcs

4 Certificate / warranty card 1 pcs

5 USB flash disk with PC software 1 pcs

VI: Service

1．The meter has one-year warranty. If the meter works abnormally, please send the

whole meter to the company for maintenance.

2．Provide users with spare parts and lifelong maintenance services.

3．Provide the users with the meter inspection service for free.

4．Free technical support for long term.

Manufacturer: Shenzhen Linshang Technology Co.,Ltd.

Website: www.linshangtech.com

Service hotline: 086-755-86263411

Email: [email protected]

Table des matières

Autres manuels LINSHANG Instrument de mesure

LINSHANG

LINSHANG LS123 Manuel utilisateur

LINSHANG

LINSHANG LS200 Manuel utilisateur

LINSHANG

LINSHANG LS301 Manuel utilisateur

LINSHANG

LINSHANG LS233 Manuel utilisateur

LINSHANG

LINSHANG LS162A Manuel utilisateur

LINSHANG

LINSHANG LS212 Manuel utilisateur

LINSHANG

LINSHANG LS220 Manuel utilisateur

LINSHANG

LINSHANG LS201 Manuel utilisateur

LINSHANG

LINSHANG LS252DL Manuel utilisateur

LINSHANG

LINSHANG LS108A Manuel utilisateur

LINSHANG

LINSHANG LS195 Manuel utilisateur

LINSHANG

LINSHANG LS136 Manuel utilisateur

LINSHANG

LINSHANG LS163 Manuel utilisateur

LINSHANG

LINSHANG LS300 Manuel utilisateur

LINSHANG

LINSHANG LS120 Manuel utilisateur

LINSHANG

LINSHANG LS101 Manuel utilisateur

LINSHANG

LINSHANG LS220B Manuel utilisateur

LINSHANG

LINSHANG LS133 Manuel utilisateur

LINSHANG

LINSHANG LS110 Manuel utilisateur

LINSHANG

LINSHANG LS126A Manuel utilisateur

LINSHANG

LINSHANG LS162 Manuel utilisateur

LINSHANG

LINSHANG LS110H Manuel technique

LINSHANG

LINSHANG LS131 Manuel utilisateur

LINSHANG

LINSHANG LS137 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur