LG V-net PDRYCB000 Manuel utilisateur

P/NO : MFL67708303

www.lg.com

TYPE : Simple Dry contact

MODEL : PDRYCB000

INSTALLATION MANUAL

• Please read this user/installation manual completely before installing the product.

• Usage/Installation work must be performed in accordance with the national wiring

standards by authorized personnel only.

• Please retain this installation manual for future reference after reading it

thoroughly.

ENGLISH

POLSKI

ITALIANO

LIMBA ROMÂNĂ

ESPAÑOL

中文

FRANÇAIS

DEUTSCH

РУССКИЙ ЯЗЫК

PORTUGUÊS ΕΛΛΗΝΙΚΆ

ČEŠTINA

NEDERLANDS

2Dry Contact

Dry Contact Unit Installation Manual

TABLE OF CONTENTS

nSafety Precautions .............................................................3~5

nOverview .................................................................................6

nPart Description ......................................................................8

PDRYCB000 (PCB + Case) ....................................................................8

Accessory.................................................................................................9

Installation ..............................................................................................10

nInstallation Guide ..................................................................12

Step1 ......................................................................................................12

Step2 ......................................................................................................13

nAdministrator Guide..............................................................14

Safety Precautions

Installation Manual 3

ENGLISH

nInstallation

Service

Center

Service

Center

To prevent injury to the user or other people and property damage, the following instructions

must be followed.

nIncorrect operation due to ignoring instruction will cause harm or damage. The seriousness is

classified by the following indications.

nMeanings of symbols used in this manual are as shown below.

WARNING

CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Be sure not to do.

Be sure to follow the instruction.

WARNING

Don’t touch with the hands

while the power is on.

• Cause fire, electric shock,

explosion or injury.

Product installation must

be referred to a service

center or installation shop.

• Cause fire, electric shock,

explosion or injury.

Request installation from

installation shop or service

center when reinstalling

the product.

• Cause fire, electric shock,

explosion or injury.

Safety Precautions

Standardized

product

Safety Precautions

4Dry Contact

Do not install the product

in the place where rain can

get to the product.

• Cause product failure

Do not install the unit in

humid locations.

• Cause product failure

Do not put the product

closer to fire.

• Cause fire

Do not install in a place

that cannot withstand the

weight of the product.

• The product may get

damaged or may break.

Do not install the product

to a place that generates

oil, steam, salt, sulfuric

gas, etc.

• Cause the product’s

deformation or failure.

Use standardized Product.

• Cause product failure

Do not change or extend

power lines arbitrarily.

• Cause fire or electric shock.

Do not give a shock to the

product.

• If you give a shock to the

product, it may cause the

product’s failure.

Do not use a heater near

the power line.

• Cause fire or electric shock.

nOperation

Service

Center

STOP

Safety Precautions

Installation Manual 5

ENGLISH

Do notspill water inside of

the product.

• Cause electric shock or

breakdown.

If the product has been

inundated, you must refer to

a service center or

installation shop.

• It can cause a fire.

Children and elderly use the

product under the

guardian’s supervision.

• Cause accidents and product

failures.

Do not use for special

purpose / place such as

conserving flora and fauna,

precision instruments, art.

• Otherwise, it can cause property

damage.

Remove the power plug

when cleaning.

• Cause fire or electric shock.

Do not place heavy objects

on the power line.

• Cause fire or electric shock.

Do not disassemble, repair,

or modify the product.

• Cause fire or electric shock.

Do not touch with wet

hands.

• Cause fire or electric shock.

6Dry Contact

Overview

LG Dry Contact is a solution for automatic control of air conditioning system at the owner’s behest.

In simple words, it’s a switch which can be used to turn the unit On/Off after getting the signal from external

sources like key-in lock, door or window switch etc specially used in Hotel rooms.

It’s a small PCB that either can be fit inside the control box of Indoor unit or can be outside the unit in a plastic case

if there is no sufficient space inside the Indoor unit.

Apart from simple installation, it can also be linked to Central Controller via Indoor unit PI485 pcb. For this, all

connecting wires & an additional small pcb for looping is also provided along with Dry Contact.

Dry Contact can be used in two ways.

1. It can be used to actually turn On/Off the system on receiving the signal from the source.

In this case, user doesn't need to use remote controller anymore to turn On/Off the system.

However all the further settings like temperature, fan speed, mode etc can be done through remote controller

only.

2. Other way is almost similar as above but in this case, after getting the On signal from the external source, user

has to turn On the system from remote controller only. Dry contact just activates the system.

However system can be turned Off directly from the external source. So only On mode is different here.

So in both of above conditions, system can’t be operated without signal from external source which prevents

unnecessary use of system & facilitates its operation only when its required.

These settings can be selected from the remote controller whose details have been explained in the later part of

this manual

So depending upon the requirement, Dry Contact offers a variety of applications to suit the customer’s requirement

in the best possible way.

Overview

Installation Manual 7

ENGLISH

Overview

Indoor PCB

Connector

Power

Connector

Dry Contact Controller

Connector

8Dry Contact

Part Description

PDRYCB000 (PCB + Case)

CN-POWER : Connector

CN-CC : Indoor PCB Connector

CN_DRY (L) : DRY CONTROLLER Connector

CN_DRY ( SIG ) : DRY CONTROLLER Connector

CN_DRY (ERROR CHECK) : ERROR Check Display Connector

CN_DRY( OPER STATE): Operation Display Connector

Front Case Rear Case

Metal Case (Front) Metal Case (Rear)

Rubber PCBA

Side Isolation Sheet

Part Description

Installation Manual 9

ENGLISH

Part Description

Accessory

Cable 1EA

(for Central controller)

Cable 1EA

(for connecting with indoor unit)

Connecting PCB

(6871A30056A)

*for Central Controller

*Note

• These cable using for connection between Dry

contact and Indoor unit.

• So before using these things Please check the

connector type first and use cables on proper indoor

unit.

User/Installation

Manual

Screw

(For installation, 4EA)

Clamp

(For installation, 4EA)

Part Description

10 Dry Contact

1) Loosen and remove two screws that secures the product.

2)Remove the front metal case by pressing the marked points.

3) Position the rear case to the direction (left or right) towards to the connector

4)Remove 4 screws, for strapping wires.

5) Secure the rear case on the installation place using the supplied fixing screws.

Installation

Autres manuels pour V-net PDRYCB000

Table des matières

Autres manuels LG Unité de contrôle

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur