LevelOne OfficeCon GSW-2420 Manuel utilisateur

LevelOne

GSW-2420

24-Port Gigabit Switch

User Manual

Version 1.0-0602

FCC Certifications

This Equipment has been tested and found to comply with the limits for a ClassA

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

hisown expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that

may cause undesired operation.

CE Mark Warning

This equipment complies with the requirements relating to electromagnetic

compatibility, EN 55022 class A for ITE, the essential protection requirement of

Council Directive 89/336/EEC on the approximation of the laws of the Member

States relating to electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible

that information in this document is not up-to-date. Please check with your local

distributors for the latest information. No part of this document can be copied or

reproduced in any form without written consent from the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.

Unpacking Information

Thank you for purchasing GSW-2420 Gigabit Switch. Before installation, please verify

that your package contains the following items.

1. One GSW-2420 24-Port Gigabit Switch

2. One AC power cord

3. Rack-mount brackets

4. Stackable kit

5. Manual CD

Introduction

General Description

Easily boost your networking throughput, this product provides you 24 Gigabit ports that

lead you to a real Gigabit connection. Users are now able to transfer large and high

bandwidth-needed files faster and hence get a real efficiency improvement.

This product offers users with fast and reliable network. The store-and-forward

architecture filters errors and forwards packets in a non-blocking environment. Flow

control ensures the correctness of data transmitting. The 802.3x and backpressure flow

control mechanisms work respectively for full and half duplex modes.

The switch features with easy installation and maintenance. It supports Nway

auto-negotiation protocol that detects the networking speed (10/100/1000 Mbps) and the

duplex modes (Full/Half) automatically. Auto-MDI/MDI-X function alleviates the effort to

use crossover cables. Also, rich diagnostic LEDs are provided for users to get real-time

information of the connection status.

Key Features

 Complies with 10BASE-T specifications of the IEEE802.3 standard

 Complies with 100BASE-TX specifications of the IEEE802.3u standard

 Complies with 1000BASE-T specifications of the IEEE802.3ab standard

 24 * 10/100/1000Mbps RJ-45 Nway ports

 Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (Half/Full)

auto-detection

 Supports MDI/MDI-X auto crossover

 Supports full and half duplex operation on all ports

 Supports back-pressure (half duplex) and flow control (IEEE 802.3x)

 Wire-speed packet filtering and forwarding rate

 Store-and-forward architecture filters fragment & CRC error packets

 Supports 8K MAC address entries in whole system

 500KBytes buffer memory

 Support 9K bytes Jumbo Frames

 Supports extensive LED indicators for network diagnostics

 Internal power adapter

 FCC,VCCI,CE Class A, Meet RoHS

The Front Panel

The front panel consists of LED indicators . For detailed LED definition, please refer to the

next paragraph.

LEDs Definition

System LED

LED Status Operation

Steady Green The switch is powered on

Power Off The switch is powered off

Port LEDs

LED Status Operation

Steady Green Valid port connection at 1000 Mbps

Blinking Green Valid port connection and there is data

transmitting/ receiving

1000M

Off Port disconnected or the port is connected

at 10 Mbps or 100 Mbps

Steady Green Valid port connection at 10/ 100 Mbps

Blinking Green Valid port connection and there is data

transmitting/ receiving

10/ 100M

Off Port disconnected or the port is connected

at 1000 Mbps

The Rear Panel

Power Receptacle

To be compatible with the electric service standards around the world, the switch is

designed to afford the power supply in the range from 100 to 240VAC, 50/60Hz. Please

make sure that your outlet standard to be within this range.

To power on the switch, plug the female end of the power cord firmly into the receptacle of

the switch and the other end into an electric service outlet. After the power cord installation,

please check if the power LED is illuminated for a normal power status.

Installation

This switch can be placed on your desktop directly, or mounted in a rack. The installation

is a snap. Users can use all the features of the switch with simply attaching the cables and

turning the power on.

Before installing the switch, we strongly recommend:

1. The switch is placed with appropriate ventilation environment. A minimum 25mm

space around the unit is recommended.

2. The switch and the relevant components are away from sources of electrical noise

such as radios, transmitters and broadband amplifiers

3. The switch is away from environments beyond recommend moisture

Desktop Installation

1. Attach the provided robber feet to the bottom of the switch to keep the switch from

slipping. The recommend position has been square-marked.

2. Install the switch on a level surface that can support the weight of the unit and the

relevant components.

3. Plug the switch with the female end of the provided power cord and plug the male

end to the power outlet.

Rack-mount Installation

Rack mounting facilitate to an orderly installation when series of networking devices

being installed. The switch is supplied with rack mounting brackets and screws for

rack mounting the unit.

Procedures to Rack-Mount the Switch in the rack:

1. Disconnect all the cables from the switch before continuing.

2. Place the unit the right way up on a hard, flat surface with the front facing

you.

3. Locate a mounting bracket over the mounting holes on one side of the unit.

4. Insert the screws and fully tighten with a suitable screwdriver.

5. Repeat the two previous steps for the other side of the unit.

6. Insert the unit into the rack and secure with suitable screws (optional).

7. Reconnect all the cables.

Network Cables Installation

1. Crossover or straight-through cable: All the ports on the switch support

Auto-MDI/MDI-X functionality. Both straight-through or crossover cables can be

used to connect the switch with PCs as well as other devices like switches, hubs

or router.

2. Category 3,4,5 or 5e UTP/STP cable: To make a valid connection and obtain the

optimal performance. Appropriate cables corresponding to different

transmitting/receiving speed is required. To choose a suitable cable, please refer

to the following table.

Media Speed Wiring

10Mbps Category 3,4,5 Utp/STP

100Mbps Category 5 UTP/STP

10/100/1000Mbps copper

1000Mbps Category 5,5e UTP/STP

Port Operation

The auto-negotiation feature allows ports running at one of the following

operation modes:

Media Speed Duplex Mode

Full Duplex10Mbps Half Duplex

Full Duplex100Mbps Half Duplex

10/100/1000Mbps(copper)

1000Mbps Full Duplex

Backbone Network Application

This switch is ideal for boosting the throughput of backbone. For an application sample of

network topology, please refer to the following chart.

Product Specifications

Standard

IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3x full-duplex flow control

IEEE802.3ab 1000BASE-T

Interface 24*10/100/1000 Mbps auto MDI/MDI-X RJ-45 switching ports

Cable

Connections

RJ-45 (10BASE-T): Category 3,4,5 UTP/STP

RJ-45 (100BASE-TX): Category 5 UTP/STP

RJ-45 (1000BASE-T): Category 5,5e or enhanced UTP/STP

Transmission

Mode

10/100Mbps Full-duplex, Half-duplex

1000Mbps Full-duplex

LED indications

Power

24* 10/ 100M: Link/ACT

24* 1000M: Link/ACT

Memory 8K MAC entries

500K bytes Buffer Memory

Emission FCC, CE, VCCI

Operating

Temperature 00~ 400C (320~ 1040F)

Operating

Humidity 10% - 90%(non-condensing)

Power Supply Internal power supply

100-240V/50-60 Hz universal input

Autres manuels pour OfficeCon GSW-2420

Table des matières

Autres manuels LevelOne Changer

LevelOne

LevelOne OfficeCon GSW-0841 Manuel utilisateur

LevelOne

LevelOne GSW-5270 Manuel utilisateur

LevelOne

LevelOne GSW-2473 Manuel utilisateur

LevelOne

LevelOne FEP-2402 Series Manuel utilisateur

LevelOne

LevelOne GTL-2661 Manuel utilisateur

LevelOne

LevelOne KCM-0832 Manuel utilisateur

LevelOne

LevelOne KVM-0211 Manuel utilisateur

LevelOne

LevelOne ProCon GSW-2693 Manuel utilisateur

LevelOne

LevelOne Infinity IES-2880 Manuel utilisateur

LevelOne

LevelOne GSW-0890 Manuel utilisateur

LevelOne

LevelOne KVM-0811 Manuel utilisateur

LevelOne

LevelOne FEP-0531 Manuel utilisateur

LevelOne

LevelOne Infinity IES-1081 Manuel utilisateur

LevelOne

LevelOne FSW-0512 Manuel utilisateur

LevelOne

LevelOne FSW-0513 Manuel utilisateur

LevelOne

LevelOne IES-0853 Manuel utilisateur

LevelOne

LevelOne GEU-0521 Manuel utilisateur

LevelOne

LevelOne ProCon GSW-1656 Manuel utilisateur

LevelOne

LevelOne KVM-0831 Manuel utilisateur

LevelOne

LevelOne GEP-2651 Manuel utilisateur

LevelOne

LevelOne FSW-1609TFX Manuel utilisateur

LevelOne

LevelOne FGP-1031 Manuel utilisateur

LevelOne

LevelOne FGP-1000 Manuel utilisateur

LevelOne

LevelOne FEP-0511v1 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur