LevelOne ProCon GSW-1656 Manuel utilisateur

LevelOne

GSW-1656/GSW-2456

16/24-Port Gigabit Switch

w/ 4-Port SFP

User Manual

Version 1.0-0608

FCC Certifications

This Equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received; including interference that

may cause undesired operation.

CE Mark Warning

This equipment complies with the requirements relating to electromagnetic

compatibility, EN 55022 class A for ITE, the essential protection requirement of

Council Directive 89/336/EEC on the approximation of the laws of the Member

States relating to electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible

that information in this document is not up-to-date. Please check with your local

distributors for the latest information. No part of this document can be copied or

reproduced in any form without written consent from the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.

Unpacking Information

Thank you for purchasing GSW-1656/GSW-2456. Before installation, please verify that

your package contains the following items.

1. GSW-1656/GSW-2456

2. Power cord

3. Rack-mount brackets

4. User Manual

Introduction

General Description

Easily boost your networking throughput; the product equips 16/24 Gigabit ports that

lead you to a real Gigabit connection. Users are now able to transfer large and high

bandwidth-needed files faster and hence get a real efficiency improvement. In addition to

the cooper ports, four of these ports support fiber connection with the equipped Mini-GBIC

ports for obtaining long-distance communication.

This product offers users with fast and reliable network. The store-and-forward

architecture filters errors and forwards packets in a non-blocking environment. Flow

control prevents data loss while transmitting. The 802.3x and backpressure flow control

mechanisms work respectively for full and half duplex modes.

The switch features with easy installation and maintenance. It supports N-way

auto-negotiation protocol that detects the networking speed (10/100/1000 Mbps) and the

duplex modes (Full/Half) automatically. Auto-MDI/MDI-X function alleviates the effort to

use crossover cables. Also, rich diagnostic LEDs are provided for users to get real-time

information of the connection status.

Key Features

 Complies with IEEE802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3z

standards

 16/24 * 10/100/1000 Mbps RJ-45 N-way ports

 4* Mini-GBIC port for optional fiber optical communication

 Supports N-Way protocol for speed (10/100/1000Mbps) and duplex mode

(Half/Full) auto-detection

 Supports MDI/MDI-X auto crossover

 Supports full and half duplex operation on all copper ports

 Supports back-pressure (half duplex) and flow control (IEEE 802.3x)

 Wire-speed packet filtering and forwarding rate

 Store-and-forward architecture

 Supports 9K bytes Jumbo frame.

 Supports 8K bytes MAC address entries in whole system

 340K(16-Port) \500K(24-Port) bytes buffer memory

 Internal power adapter

The Front Panel

The front panel consists of LED indicators. For detailed LED definition, please

refer to the next paragraph.

LEDs Definition

System LED

LED Status Operation

Steady Green The switch is powered on

Power Off The switch is powered off

Port LEDs

LED Status Operation

Steady Green Valid port connection at 1000 Mbps

Blinking Green Valid port connection and there is data

transmitting/ receiving

1000M

Off Port disconnected or the port is connected

at 10 Mbps or 100 Mbps

Steady Green Valid port connection at 10/ 100 Mbps

Blinking Green Valid port connection and there is data

transmitting/ receiving

10/ 100M

Off Port disconnected or the port is connected

at 1000 Mbps

Attention：The Mini GBIC slot shares the same LED indicators with Gigabit RJ-45

(copper) ports.

The Rear Panel

Power Receptacle

To be compatible with the electric service standards around the world, the switch is

designed to afford the power supply in the range from 100 to 240VAC, 50/60Hz. Please

make sure that your outlet standard to be within this range.

To power on the switch, plug the female end of the power cord firmly into the receptacle of

the switch and the other end into an electric service outlet. After the power cord installation,

please check if the power LED is illuminated for a normal power status.

Installation

This switch can be placed on your desktop directly, or mounted in a rack. The installation

is a snap. Users can use all the features of the switch with simply attaching the cables and

turning the power on.

Before installing the switch, we strongly recommend:

1. The switch is placed with appropriate ventilation environment. A minimum 25mm

space around the unit is recommended.

2. The switch and the relevant components are away from sources of electrical noise

such as radios, transmitters and broadband amplifiers

3. The switch is away from environments beyond recommend moisture

Desktop Installation

1. Attach the provided robber feet to the bottom of the switch to keep the switch from

slipping. The recommend position has been square-marked.

2. Install the switch on a level surface that can support the weight of the unit and the

relevant components.

3. Plug the switch with the female end of the provided power cord and plug the male

end to the power outlet.

Rack-mount Installation

Rack mounting facilitate to an orderly installation when series of networking devices

being installed. The switch is supplied with rack mounting brackets and screws for rack

mounting the unit.

Procedures to Rack-Mount the Switch in the rack:

1. Disconnect all the cables from the switch before continuing.

2. Place the unit the right way up on a hard, flat surface with the front facing you.

3. Locate a mounting bracket over the mounting holes on one side of the unit.

4. Insert the screws and fully tighten with a suitable screwdriver.

5. Repeat the two previous steps for the other side of the unit.

6. Insert the unit into the rack and secure with suitable screws (optional).

7. Reconnect all the cables.

Network Cables Installation

1. Crossover or straight-through cable: All the ports on the switch support

Auto-MDI/MDI-X functionality. Both straight-through or crossover cables can be

used to connect the switch with PCs as well as other devices like switches, hubs or

router.

2. Category 3,4,5 or 5e UTP/STP cable: To make a valid connection and obtain the

optimal performance. Appropriate cables corresponding to different

transmitting/receiving speed is required. To choose a suitable cable, please refer to

the following table.

Media Speed Wiring

10Mbps Category 3,4,5 UTP/STP

100Mbps Category 5 UTP/STP

10/100/1000Mbps copper

1000Mbps Category 5,5e UTP/STP

1000Mbps Fiber

(Mini GBIC required) 1000Mbps The cable type differs from the mini-GBIC

you choose. Please refer to the instruction

came with your mini-GBIC.

Port Operation

The auto-negotiation feature allows ports running at one of the following

operation modes:

Media Speed Duplex Mode

Full Duplex10Mbps Half Duplex

Full Duplex100Mbps Half Duplex

10/100/1000Mbps(copper)

1000Mbps Full Duplex

1000Mbps(Fiber)

(mini-GBIC required) 1000Mbps Full Duplex

Note: For the last four ports, when both the fiber and cooper interfaces are

connected, the system adapts the fiber interface and disables the relevant cooper

port automatically.

Backbone Network Application

This switch is ideal for boosting the throughput of backbone. For an application sample of

network topology, please refer to the following chart.

Product Specifications

Standard

IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3x full-duplex flow control

IEEE802.3z/ab 1000BASE-T

Interface 16/24 *10/100/1000 Mbps auto MDI/MDI-X RJ-45 switching ports

4 *shared Mini-GBIC module sockets

Cable

Connections

RJ-45 (10BASE-T): Category 3,4,5 UTP/STP

RJ-45 (100BASE-TX): Category 5 UTP/STP

RJ-45 (1000BASE-T): Category 5,5e or enhanced UTP/STP

Fiber: depend on Mini-GBIC types

Transmission

Mode 10/100Mbps Full-duplex, Half-duplex

1000Mbps Full-duplex

LED indications

Power

16/24 * 10/ 100M: Link/ACT

16/24 * 1000M: Link/ACT

Memory

8K MAC entries

340K bytes Buffer Memory (16 Port)

500K bytes Buffer Memory (24 Port)

Emission FCC Class A,

Operating

Temperature 00~ 400C (320~ 1040F)

Operating

Humidity 10% - 90%(non-condensing)

Power Supply Internal power supply

100-240V/50-60 Hz universal input

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LevelOne Changer

LevelOne

LevelOne GSW-0508 Manuel utilisateur

LevelOne

LevelOne KCM-0832 Manuel utilisateur

LevelOne

LevelOne FEU-0511 Manuel utilisateur

LevelOne

LevelOne KVM-0221 Manuel utilisateur

LevelOne

LevelOne GEP-2651 Manuel utilisateur

LevelOne

LevelOne GSW-0508 Manuel utilisateur

LevelOne

LevelOne GEP-0950 Manuel utilisateur

LevelOne

LevelOne GEP-2450 Manuel utilisateur

LevelOne

LevelOne IES-0851 Manuel utilisateur

LevelOne

LevelOne FGL-2870 Manuel utilisateur

LevelOne

LevelOne FGP-1000 Manuel utilisateur

LevelOne

LevelOne GTL-2661 Manuel utilisateur

LevelOne

LevelOne Infinity IES-1081 Manuel utilisateur

LevelOne

LevelOne FSW-1610TX Manuel utilisateur

LevelOne

LevelOne GEP-0520 Manuel utilisateur

LevelOne

LevelOne GEP-0823 Manuel utilisateur

LevelOne

LevelOne FEP-0531 Manuel utilisateur

LevelOne

LevelOne GEL-2670 24 GE + 2 GE SFP Manuel utilisateur

LevelOne

LevelOne FSW-0803TX Manuel utilisateur

LevelOne

LevelOne GEP-2681 Manuel utilisateur

LevelOne

LevelOne GSW-1676 Manuel utilisateur

LevelOne

LevelOne FGP-1000 Manuel utilisateur

LevelOne

LevelOne GES-1650 Manuel utilisateur

LevelOne

LevelOne GEU-2429 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur