Kramer MV-4X Manuel utilisateur
MV-4X Quick Start
P/N:
2900- 301494QS
Rev:
1
Scan for full manual
MV-4X Quick Start Guide
This guide helps you install and use your MV-4X for the first time.
Go to www.kramerav.com/downloads/MV-4X to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check what’s in the box
MV-4X 4 Window Multi-viewer/4x2 Seamless Matrix Switcher
1 Power adapter and cord
1 Quick start guide
4 Rubber feet
Step 2: Get to know your MV-4X
#
Feature
Function
1
INPUT Selector Buttons (1 to 4)
Press to select an HDMI input (from 1 to 4) to switch to an output.
2
OUTPUT (in
Matrix Mode)
Selector Button
Press to select an output.
LEDs (A and B)
Light green when output A or B are selected.
3
WINDOW (in
Multiview Mode)
Selector Button
Press followed by an input button to connect the selected input to a window.
For example, select Window 3 and then Input button # 2 to connect input # 2 to
Window 3.
LEDs (1 to 4)
Light green when a window is selected.
4
MATRIX Button
Press to operate the system as a 4x2 matrix switcher.
5
QUAD Button
Press to display all four inputs on each of the outputs. Layouts are configured
via the embedded web pages.
6
PIP Button
Press to display one input in the background and the other images as PiP
(Picture-in-Picture) over that image. Layouts are configured via the embedded
web pages.
7
MENU Button
Press to access the OSD menu, exit the OSD menu and, when in the OSD
menu, move to the previous level in the OSD screen
8
Navigation
Buttons
Press to decrease numerical values or select from several definitions.
Press to move up the menu list values.
Press to increase numerical values or select from several definitions.
Press to move down the menu list.
Enter
Press to accept changes and change the SETUP parameters.
9
RESET TO XGA/1080P Button
Press and hold for about 2 seconds to toggle the output resolution between
XGA and 1080p, alternatively.
10
PANEL LOCK Button
To lock, press and hold PANEL LOCK button for about 3 seconds.
To unlock, press and hold PANEL LOCK and RESET TO buttons for about 3
seconds.
#
Feature
Function
11
HDMI IN Connectors (1 to 4)
Connect to up to 4 HDMI sources.
12
AUDIO OUT 5-pin Terminal Block
Connector
Connect to a balanced stereo audio acceptor.
13
HDBT
IR IN RCA Connector
Connect to an IR sensor to control a device connected to the HDBT receiver
via IR Tunneling.
IR OUT RCA Connector
Connect to an IR emitter to control a device that is connected to MV-4X from
the HDBT receiver side via HDBT tunneling.
14
HDBT RS-232 3-pin Terminal Block
Connector
Connect to a device for RS-232 HDBT tunneling.
15
RS-232 3-pin Terminal Block Connector
Connect to a PC to control the MV-4X.
16
HDMI OUT A Connector
Connect to an HDMI acceptor.
17
HDBT OUT B RJ-45 Connector
Connect to a receiver (for example, TP-580Rxr).
18
PROG USB Connector
Connect to a USB stick to perform firmware upgrades and/or upload a Logo.
19
ETHERNET RJ-45 Connector
Connect to a PC via a LAN
20
12V/2A DC Connector
Connect to the supplied power adapter.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Step 3: Mount MV-4X
Install MV-4X using one of the following methods:
•Attach the rubber feet and place the unit on a flat surface.
•Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/MV-4X).
•Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•Avoid uneven mechanical loading.
•Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•Reliable earthing of rack-mounted equipment should be maintained.
•Maximum mounting height for the device is 2 meters.
Step 4: Connect inputs and outputs
Always switch OFF the power on each device before connecting it to your MV-4X.
Connecting the audio output
To a balanced
stereo audio
acceptor:
To an unbalanced
stereo audio acceptor:
Wiring the RJ-45 Connectors
This section defines the TP pinout, using a straight pin-to-
pin cable with RJ-45 connectors.
EIA /TIA 568B
PIN
Wire Color
1
Orange / White
2
Orange
3
Green / White
For HDBT cables, it is recommended that the cable
ground shielding be connected/soldered to the
connector shield.
4
Blue
5
Blue / White
6
Green
7
Brown / White
8
Brown
To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/MV-4X.
Using third-party cables may cause damage!
Step 5: Connect power
Connect the power cord to MV-4X and plug it into the mains electricity.
Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
•There are no operator serviceable parts inside the unit.
Warning:
•Use only the power cord that is supplied with the unit.
•Disconnect the power and unplug the unit from the wall before installing.
Step 6: Operate MV-4X
Operate Product via:
•Front panel buttons.
•Remotely, by RS-232 serial
commands transmitted by a
touch screen system, PC, or
other serial controller.
•Embedded web pages via the
Ethernet.
RS-232 Control / Protocol 3000
Baud Rate:
115,200
Parity:
None
Data Bits:
8
Command Format:
ASCII
Stop Bits:
1
Example: (Mute audio on output A): #MUTEA,1<CR>
Default Ethernet Parameters
IP Address:
192.168.1.39
UDP Port #:
50000
Subnet Mask:
255.255.0.0
TCP Port #:
5000
Gateway:
192.168.0.1
Default Username:
Admin
Default Password:
Admin
Autres manuels pour MV-4X
1
Autres manuels Kramer Commutateur matriciel
Kramer
Kramer XL 3216VS Manuel utilisateur
Kramer
Kramer VS-3232DN Manuel utilisateur
Kramer
Kramer 1608HD Manuel utilisateur
Kramer
Kramer XL 1616V Manuel utilisateur
Kramer
Kramer VS-626 Manuel utilisateur
Kramer
Kramer VS-88HDCPxl Manuel utilisateur
Kramer
Kramer VS-3232DN-EM Manuel utilisateur
Kramer
Kramer VS-4228 Manuel utilisateur
Kramer
Kramer VS-1616D Manuel utilisateur
Kramer
Kramer VS-66HN Manuel utilisateur
Kramer
Kramer Sierra Video 1204V3S Manuel utilisateur
Kramer
Kramer VS-2516 Manuel utilisateur
Kramer
Kramer VS-88HN Manuel utilisateur
Kramer
Kramer VS-88HCB Manuel utilisateur
Kramer
Kramer VP-725DS Manuel utilisateur
Kramer
Kramer VS-1202YC Manuel utilisateur
Kramer
Kramer VS-66HDCPxl Manuel utilisateur
Kramer
Kramer VS-88HD Manuel utilisateur
Kramer
Kramer VP-32XLN Manuel utilisateur
Kramer
Kramer VS-6464DN Manuel utilisateur
Manuels Commutateur matriciel populaires d'autres marques
AMX
AMX AVS-OP-2020-117 Instructions et recettes
Lindy
Lindy 38042 Manuel utilisateur
Extron electronics
Extron electronics MTPX Plus Series Manuel utilisateur
Key Digital
Key Digital Champion KD-16x16CS Manuel utilisateur
Shinybow USA
Shinybow USA SB-8811 Manuel utilisateur
Optimus
Optimus Compact Manuel utilisateur