Keysight Technologies 86120D Manuel utilisateur

User’s Guide

Keysight 86120D and 86122C

Multi-Wavelength Meters

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from

Keysight Technologies as governed by

United States and international copyright

laws.

Manual Part Number

86122-90B02

Edition

Edition 4.0, October 2017

Keysight Technologies Deutschland GmbH

Herrenberger Strasse 130,

71034 Böblingen, Germany

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acquisition

Regulation (“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement

(“DFARS”) 227.7202, the U.S. government

acquires commercial computer software

under the same terms by which the soft-

ware is customarily provided to the public.

Accordingly, Keysight provides the Soft-

ware to U.S. government customers under

its standard commercial license, which is

embodied in its End User License Agree-

ment (EULA), a copy of which can be found

at http://www.keysight.com/find/sweula.

The license set forth in the EULA represents

the exclusive authority by which the U.S.

government may use, modify, distribute, or

disclose the Software. The EULA and the

license set forth therein, does not require

or permit, among other things, that Key-

sight: (1) Furnish technical information

related to commercial computer software

or commercial computer software docu-

mentation that is not customarily provided

to the public; or (2) Relinquish to, or other-

wise provide, the government rights in

excess of these rights customarily provided

to the public to use, modify, reproduce,

release, perform, display, or disclose com-

mercial computer software or commercial

computer software documentation. No

additional government requirements

beyond those set forth in the EULA shall

apply, except to the extent that those

terms, rights, or licenses are explicitly

required from all providers of commercial

computer software pursuant to the FAR and

the DFARS and are set forth specifically in

writing elsewhere in the EULA. Keysight

shall be under no obligation to update,

revise or otherwise modify the Software.

With respect to any technical data as

defined by FAR 2.101, pursuant to FAR

12.211 and 27.404.2 and DFARS 227.7102,

the U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as appli-

cable in any technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions

are fully understood and met.

2Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide

Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide 3

Contents

1 Getting Started

General Safety Considerations 8

Warnings and Notices 8

Instrument Markings 9

Setting Up the Multi-Wavelength Meter 14

Step 1. Inspect the Shipment 14

Step 2. Consider Environmental Specifications 17

Step 3. Configure for Bench Top or Rack Mount Use 19

Step 4. Connect a Keyboard and Mouse (Optional) 21

Step 5. Connect the Line Cord 22

Step 6. Turn On the Line Power 23

Step 7. Calibrate the Touch Screen (Optional) 25

Step 8. Set the Time and Date 27

Step 9. Set the System Standby Mode 28

Step 10. Add a Printer 30

Step 11. Change Region and Language Settings 33

Step 12. Avoid Costly Repairs 38

Step 13. For More Information 38

Making Measurements 39

Step 1. Consider Measurement Limitations 39

Step 2. Select Basic Measurement Setup Parameters 42

Step 3. Define Laser-Line Peaks 45

Step 4. Make Measurements 48

Step 5. Adjust the Graph to Your Preference 51

Step 6. Save Measurement Results 56

4 Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide

Contents

Returning the Instrument for Service 59

Preparing the instrument for shipping 59

Keysight Technologies Service Offices 62

2 Using the Multi-Wavelength Meter

Introduction 64

Differences Between the 86120D, 86122C and Previous

Models 65

Differences in General Operation 65

Differences in Remote Commands 66

Front and Rear Panel Features 68

Main Screen Layout 70

Graphs and Tables 72

Front Panel Buttons 73

Menus 76

The File menu 76

The View menu 77

The Setup menu 78

The Measure menu 78

The Utilities menu 79

The Apps menu 79

The Help menu 79

Dialog Box Operation 80

Hard Drive Recovery 81

Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide 5

Contents

3 Cleaning Information

Cleaning Instructions 84

Safety Precautions 84

Why is it important to clean optical devices? 84

What do I need for proper cleaning? 85

Preserving Connectors 90

How to clean connector interfaces 92

How to clean bare fiber adapters 93

How to clean instruments with a fixed connector interface 94

Additional Cleaning Information 95

Other Cleaning Hints 95

4 Specifications and Regulatory Information

Definitions of Terms 98

Specifications 100

Compliance with German Noise Requirements 103

Compliance with Canadian EMC Requirements 103

Declaration of Conformity 103

Keysight 86120D and 86122C Multi-Wavelength Meters

User’s Guide

1Getting Started

General Safety Considerations / 8

Setting Up the Multi-Wavelength Meter / 14

Making Measurements / 39

Returning the Instrument for Service / 59

Keysight Technologies Service Offices / 62

8 Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide

1 Getting Started

General Safety Considerations

This product has been designed and tested in accordance with the

standards listed in the Manufacturer’s Declaration of Conformity, and has

been supplied in a safe condition. The documentation contains information

and warnings which must be followed by the user to ensure safe operation

and to maintain the product in a safe condition.

Warnings and Notices

WARNING

To avoid the possibility of injury or death, you must observe the following

precautions before switching on the instrument. Insert the power cable

plug only into a socket outlet provided with a protective earth contact.

Do not negate this protective action by the using an extension cord

without a protective conductor.

WARNING

Never look directly into the end of a fiber or a connector, unless you are

absolutely certain that there is no signal in the fiber.

Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide 9

Getting Started 1

Instrument Markings

The instruction manual symbol. The product is marked with this

warning symbol when it is necessary for the user to refer to the

instructions in the manual.

The laser radiation symbol. This warning symbol is marked on

products which have a laser output.

The AC symbol is used to indicate the required nature of the line

module input power.

The ON symbols are used to mark the positions of the

instrument power line switch.

The OFF symbols are used to mark the positions of the

instrument power line switch.

The CE Marking to state compliance within the European Union.

This product is in conformity with the relevant European

Directives. This text denotes the instrument is an Industrial

Scientific and Medical Group 1 Class A product.

The Safety Mark of the Canadian Standards Association CSA.

The C-Tick Conformity Mark of the Australian ACA for EMC

compliance.

This text denotes the instrument is an Industrial Scientific and

Medical Group 1 Class A product.

This marking is for China only and states compliance with the

Chinese Toxic or Hazardous Substances and Elements

requirements.

General Recycling Mark.

10 Keysight 86120D and 86122C Multi-Wavelength Meters User’s Guide

1 Getting Started

This product complies with the WEEE Directive (2002/96/EC)

marketing requirements. The affixed label indicates that you

must not discard this electrical/electronic product in domestic

household waste.

Product category: With reference to the equipment types in the

WEEE Directive Annexure I, this product is classed as a

“Monitoring and Control instrumentation” product.

Do not dispose in domestic household waste.

To return unwanted products, contact your local Keysight office, or see

http://about.keysight.com/en/companyinfo/environment/takeback.shtml

for more information.

WARNING

If this product is not used as specified, the protection provided by the

equipment could be impaired. This product must be used in a normal

condition (in which all means for protection are intact) only.

WARNING

No operator serviceable parts inside. Refer servicing to qualified service

personnel. To prevent electrical shock do not remove covers.

WARNING

This is a Safety Class 1 Product (provided with protective earth). The

mains plug shall only be inserted in a socket outlet provided with a

protective earth contact. Any interruption of the protective conductor

inside or outside of the instrument is likely to make the instrument

dangerous. Intentional interruption is prohibited.

WARNING

To prevent electrical shock, disconnect the instrument from mains

before cleaning. Use a dry cloth or one slightly dampened with water to

clean the external case parts. Do not attempt to clean internally.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies N5251A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies UXA N9040B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies Streamline Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 6811C Mode d'emploi

Keysight Technologies

Keysight Technologies M981 AS Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9321C Manuel utilisateur

Keysight Technologies

Keysight Technologies N9000A Manuel utilisateur

Keysight Technologies

Keysight Technologies N99xxA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies CX3300 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U4431A Manuel utilisateur

Keysight Technologies

Keysight Technologies FieldFox N9927-90002 Manuel utilisateur

Keysight Technologies

Keysight Technologies B2900A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9020B Manuel

Keysight Technologies

Keysight Technologies N432A Manuel utilisateur

Keysight Technologies

Keysight Technologies IntegraVision PA2200 Series Manuel de service

Keysight Technologies

Keysight Technologies U9361F Manuel utilisateur

Keysight Technologies

Keysight Technologies M9393A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies N9030B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies U5303A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies M9451A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies N9030B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N5250C PNA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9040B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies E5260 Series Mode d'emploi

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur