Kane 400 Manuel utilisateur

Supplied By www.heating spares.co Tel. 0161 620 6677

Stock No: 17998

KANE 400 QUICK REFERENCE GUIDE

INSTRUMENT FEATURES AND KEYPAD

Infra-red Printer emitter

Battery Status

Indicator

Display

Mode Indicators

Keypad

Particle Filter

Water Trap

Flue Gas Inlet

Analyser Connections

(Tf = Flue Temperature socket)

Water Trap Drain Plug

(must be fitted into 4mm diameter hole)

ON / OFF

Turns analyser ON and OFF

Allows access to all menu functions

Print ‘live’ or stored data

BACK-LIGHT

Hold to toggle back-light ON or OFF

STORE

Access the data memory

PUMP

Turns pump ON and OFF

Changes TOP line of display.

ENTER

Changes BOTTOM two lines of

display.

Supplied By www.heating spares.co Tel. 0161 620 6677

BEFORE USING ANY ANALYSER CHECK THAT:

- The calibration date has not expired

- The particle filter is not dirty

- The water trap and flue probe hose are empty of water

- The water trap is fitted correctly to the instrument including the drain plug

- The flue probe hose is connected properly to the water trap

- The flue temperature plug is connected into Tf

USING THE ANALYSER

Switch the analyser on. It will now purge for approximately 20 seconds after which

it will show a set a readings on the display and now is a good time to check the

battery status.

Using the key, scroll until the display shows the CO/CO

ratio or whatever

you want to look at.

Insert the probe into the centre of the flue after approximately 60 seconds the

readings should stabilise.

STORING A TEST

Press the key once the display will show you at what number it will record

your test.

Press the key again and it will store your test.

RETRIEVING A TEST

Press the key once, then press the key. View will now be shown

on the screen.

Using the key you can now count up to the number where your test was

stored.

When you’ve reached the correct number, press the key and your test

readings will be displayed.

PRINTING A TEST

You can now print the test by pressing the key.

To return to the main screen, press the key.

Remove the probe from the flue and allow the analyser to purge with fresh air

before switching off!

Supplied By www.heating spares.co Tel. 0161 620 6677

SETTING / CHANGING THE MAIN DISPLAY

The top half of the display operates independently from the bottom half.

Top Display Options Bottom Display Options

To scroll press To scroll press

FUEL TYPE O

and CO

EFFICIENCY CO

and diff Temp

EXCESS AIR O

and flue Temp

TIME CO2 and inlet Temp

DATE CO/CO

and CO

PRESSURE

CO ref

POISON INDEX

CHANGING THE SETTINGS

The MENU options allows all the settings to be changed

Press to enter, use to scroll around the headings, use to

select a new option.

Then use to store the option and move to the next heading.

Escape at any time by pressing a number of times until you get back to the

main display screen.

CHANGING NUMBERS

When you select a menu option that needs a number entering or changing, the

display shows the current number on the top line. If you don’t need to change the

number just press .

If you want to change this number press and the first digit to be changed

will appear on the bottom line. Press to increase the number or to

decrease the number. Press to store the number and move on.

The final press of in a sequence will move you on to the next heading.

You can escape at any time by pressing until you are returned to the main

display screen. If you press before you have properly finished the number

changing sequence, then the original number will be retained.

Supplied By www.heating spares.co Tel. 0161 620 6677

MENU OPTIONS

HEADING OPTION

FUEL NAT GAS

PROPANE

BUTANE

L OIL

LPG

PUMP HOLD HOLD ON

HOLD OFF

RESET YES

PRESSURE Millibar

InWG

MmWG

Hpa

ref Enter number

TEMPERATURE Centigrade

Fahrenheit

GAS UNITS PPM

Mg/m

EFFICIENCY GROSS

NETT

SETUP CONTRAST

FUEL TABLE

HOURS

MINUTES

YEAR

MONTH

DAY

FORMAT

LANGUAGE

Autres manuels Kane Instrument de mesure

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur