Kane CO2 Manuel utilisateur

Instruction Manual

KANE-CO2

Indoor Carbon

Dioxide Monitor

Inventory No: MAN00134

Rev.: 0.00000

January 2021

Contents

Getting Started

Packing List

Features at a Glance

Overview

General Operation & Settings

Operating Instructions

LCD Display

Trend Chart Display

Max/Min

Main Menu Functions

Specifications

Appendix

Features:

•Large Display

•Touch Button Operation

•15° Bevel Design, Easy to Read

•Low Drift NDIR Sensor, Long Lifespan

•Audible & Visible Alarm

•Chart with Variable Time Zoom Levels

•CO2/RH/Temperature Monitor Tracer

•Auto-Calibration & Manual Calibration

•Max/Min Value Display in Certain Time

Thank you for purchasing our desktop KANE-CO2 monitor. This product is used to

monitor CO2 concentration, humidity(RH) & temperature(TEMP) for indoor

air quality monitoring

Getting Started

Contents:

•CO2 Monitor Unit

•USB Cable for Power

•User Manual

•AC Adapter (Optional)

Front Panel Good Level

Low Level

Hole for Rope

Hole for Screws

USB Port

LCD

Button

Power Indicator

High Level

Item ItemDescription Description

Overview

Drawing Sketch & Components List

Hole for Sensors

Hole for Buzzer

Label

213

•Use provided USB cable to connect the device. Once the countdown is complete,

your device is ready to use. See detail in Page 3.

•Use & buttons to switch timeline & CO2/RH/TEMP. The trend chart

displays the history records for any of the three parameters. See detail in Page 5.

•To restore factory defaults, hold for 4 seconds until an audible beep is heard.

•Press once will bring up the main menu. To select the function, press /

button. See detail in Page 7.

•Select to switch human and plants modes. See detail in Page 8.

•Select to change the high/low alarms for human and plant . See detail in

Page 11.

•Enter to switch alarm and mute . See detail in Page 8.

•Enter to switch temperature units C and F. See detail in Page 10.

General Operation & Settings

Operating Instructions

1. When first unboxing, plug in the unit with the

provided USB cable as shown on the right.

2. Once successfully connected, the power indicator

& 3 LEDs flash one by one.

3. Main display shows a countdown from 10.

Once the countdown is complete, your

product is ready to use. No initial setup

or calibration is needed

ItemItem Name Name

CO2/RH/TEMP Chart

Max Reading of Chart

Min Reading of Chart

RH Reading

Main Menu

CO2 Reading

Time per Division - indicates the

Plant Mode

Human Mode

Audible Alarm On/Off

Temperature Reading C / F

o o

chart’s span of time

LCD Display

The below chart displays the past readings for any of the three parameters (CO2/RH

/TEMP). There are 4 modes that can be toggled by using key: CO2, TEMP, RH,

& Cycle(automatically cycles through CO2/TEMP/RH)

Press will toggle the available Zoom Levels for each parameters.

(Minute/Hour/Day/Week)

Trend Chart Display

Press Press Press

Press

Zoom Level (Time Span) Time per Division

1M (minute) 5sec /div

1H (hour) 5m / div

1D (day) 2h / div

1W (week) 0.5d / div

Max / Min

Below is a table that shows the available Zoom Levels for all parameters CO2/RH/

TEMP, as well as the duration of each division for corresponding Zoom Levels:

At the top right corner of the display, there are two numerical indicators: MAX &

MIN. As the Zoom Level is changed, the MAX & MIN values will reflect the

maximum & minimum values on the chart of the selected parameter

(CO2, RH & TEMP).

The Main Menu functions can be actived by pressing . Pressing / once

will bring up the main menu, with an underlining flashing bar indicating the

current choice.

Main Menu Functions

Press

No pressing any

button in 1 minute

/ Press

Press

Select number 0 to enter human mode. 0 is defaulted as human mode, unchangeable.The

preset Low & high alarm are 800 & 1200ppm. Enter "ADV" to adjust them if necessary.

In plant mode, it allows user to select between types of plants for optimal setting by using

/ cycles through 1~9. See number references with corresponding alarm settings in

high & low alarms in Page 14.

When ALARM display , an audible alarm will sound if the CO2 level exceeds

preset CO2 alarm value; means MUTE.

To select the function, press when it is underlined by the flashing bar. Note that

after 30 seconds if nothing is pressed, the Main Menu will disappear & the device

will revert to the normal state.

Press /

Press

Press (main interface)

(main interface)

Press

Function Description

ALARM

PLANT

Press

PressPress

Press

PressPress

Press

Main

interface

Press

Table des matières

Autres manuels Kane Instrument de mesure

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur