Jbc TE-1C Manuel utilisateur

English

www.jbctools.com

Precision Hot Air Station

Ref. TE-C

www.jbctools.com

Packing List

The following items should be included:

Accessory set

Ref. 0012332

2 3

Manual .............1 unit

Ref. 0015898

* Not supplied with TE-QC

www.jbc tools.com

Power Cord .....1 unit

Ref. 0009417

(100V/120V)

0009401

(230V)

Precision Hot Air Station

Ref. TE-C

Precision Heater

hose set ............................1 unit

Ref. TE-TB

Stand ..................................1 unit

Ref. TE-SA

JTE Control Unit ............1 unit

Ref. JTE-1C

JTE-2C

JTE-9C

Extractor desk* ..............................................1 unit

Ref. 0008752

Suction Tube*

Ref. 0932330

Suction Cups*

Ref. 0930110

Ø 10 - 0934050 (x3)

Ø 4.7 - 0934070 (x1)

Extractors*

Ref. E2184

E2064

E2052

Protectors*

Ref. P2220

P2230

P2235

P4000

P4010

Tripod*

Ref. T2050

T2250

Nozzles

Ref. TN9209 Ø 3mm

TN9208 Ø 4mm

TN9080 Ø 5mm

www.jbctools.com

Features

Compatible Nozzles

The TE-TB works with TE nozzles. Find the model that best suits your soldering needs in www.jbctools.com

4 5

Other connectable tool:

Heater hose set

Ref: JT-TA

Hot Air switch

(On / Off)

Power Socket

Fuse

Equipotential

connection

To Pedal

Ref. P-005

Press the pedal to start

hot air or release to stop.

Heating

element

Precision Heater

Hose set

Ref. TE-TB

Suction Tube

Ref. 0932330

For tripods

and extractors

Activates the

suction pump

USB-B connector

Update the station

software from

the JBC website

Suits your work position

Adjustable Stand Nozzle Changer

Nozzle changer

Ref. Shape Size

TN9209 Straight Ø 3mm

TN9208 Straight Ø 4mm

TN9080 Straight Ø 5mm

TN9787 Bent Ø 3mm

TN9785 Bent Ø 4mm

TN9782 Bent Ø 5mm

Straight Bent

Ø mm Ø mm

www.jbctools.com

Temp

CAir %

Time to stop 45 seconds

Power 70%

400 85

400ºC Select

Operation

Process Control

3. Releasing1. Placing 2. Heating

For small components (fig. 1 and 2). For large components (fig. 3 and 4).

6 7

Position the extractor with the

appropriate suction cup and

press the suction button.

Heat the component by

pressing the heater button.

The component lifts off

automatically when the

solder melts.

Access Menu (pess key 2 seconds) & Confirm Selection

Selected temperature

Current temperature

% Instant power supplied

to heater

You can switch between operating modes (Manual Mode / Program Mode) by pressing the

“increase” and “decrease” keys simultaneously for 2 seconds (Only when programs mode is ON).

Manual Mode

We recommend using the protector + tripod We recommend using the extractors

Protectors & Extractors

1 2 3 4

Protectors

* Ref. AxB (mm) * Ref. AxB (mm)

P3353 4,3 x 3 48 P2230 15 x 15

P3786 5,2 x 5,2 60 P4010 17 x 17

P3352 5,2 x 7,5 P4005 18 x 29

P3355 5,2 x 9,5 P4030 18,5 x 18,5

P3356 6,2 x 4,2 P1068 18,5 x 24

P3785 7,2 x 7,2 P2685 28,5 x 28,5

P3784 8,2 x 8,2 P4085 31,5 x 31,5

P4035 9 x 13 P2672 33 x 46

P4040 9,5 x 19 P4002 50 x 50

P4080 9,5 x 21 P3357 52,5 x 14

32 P2220 10 x 10

P4045 10,5 x 21

P4090 11 x 16

24 P2235 12 x 17

P1249 12 x 23

44 P4000 12,5 x 12,5

P3354 13,2 x 13,2

P4025 13,5 x 21,5

øD

* Reference Desk

Tripods

* Ref. øC (mm)

T2050 39

T2250 85

Manual extractor

* Ref. øD (mm)

E2190 7

Extractors

* Ref. AxB (mm) * Ref. AxB (mm)

52 E2052 20 X 20 E2124 45 X 45

64 E2064 20 X 26

80 E2184 24 X 24

E2068 27 X 27

E4020 28,5 X 28,5

E4015 31,5 X 31,5

E2084 33 X 33

E2100 38 X 38

Current air flow

www.jbctools.com

Main menu

1 Reset settings

2 Station

Settings

Program Settings

Counters

5 Program version

Exit

Settings Program Settings

Edit Program

Edit Program 8

Temp unit Celsius

2 Maximum

temp 450

3Minimum temp T OFF*

4 Fix temp 400

5 Temp Adjust 0

6 Max air 100%

7 Min air 10%

8 Fix air 40%

9 Time to stop 120 sec

10 Beep ON

11 Pop up ON

12 Change PIN

1 Programs

2 Edit program

Copy program

Delete program

Back

Select

Program

Step 4

Time 20

Temp 450

Air 100

Exit

Counters

1 Station ON hours

Works hours 0

3Works

cycles 0

Back

Temp

CProgram 8

380

Air 100%

Time 125s.

8 9

* Selecting Minimum Temp as

“T OFF”, the air blows at room

temperature.

Menu Screen

Original PIN: 0105

Decrease program

number

Increase program

number

Selected program

Current temperature

Selected air flow

Graph of selected

program

Remaining time

Program Mode

Edit Program

This option allows you to edit or create a program.

First, you must select the program to edit and then modify the points that make up the program.

Each program is composed of 9 points, each point consisting of 3 parameters:

1. Time (seconds)

2. Temperature (°C / °F)

3. Flow rate (%)

You can delete the last point of the program by selecting “-----” in the time parameter.

Remember that the regulation range permitted by the station is between 150°C and 450°C, so it is

not possible to create temperature ramps between room temperature ( T OFF ) and 150°C.

The station can store up to 25 temperature programs.

The first three programs are installed as an example.

Copy Program

This option allows you to copy a program.

You must select the program source and its destination (where it will be copied).

Delete Program

This option will allow you to delete a previously selected program.

www.jbctools.com

Choose the needle and the suction cup that best ﬁts the component and start working as follows:

Maximum working temp: 250ºC (482ºF)

Operation

1. Suction

Pick & Place

Ref. T260-A

2. Release

This tool helps you easily place and remove SMDs of any size thanks to the suction pump.

Pick & Place (not supplied with TE)

Press the button to

start/stop the suction

Once the suction is

activated, cover the

pen hole with your

ﬁnger and lift off the

component.

Insert the needle

with the appropriate

cup for a correct

suction process.

Lift your ﬁnger

to release the

component in the

appropriate place.

You should

avoid the needle

protruding from the

lower part.

Pick & Place

Ref. T260-A

Straight Needles Set

Ref. 0901546

Bent Needles Set

Ref. 0861660

10 11

Only perform this operation when the element is cold and the unit is disconnected from the mains.

1. Loosen the screw.

2. Pull the heating element away from the handle.

3. Connect the new heating element, ensuring it is pushed all the way in.

4. Tighten the screw.

Replacing the Heating Element

1. Ensure that the tool is turned off.

2. Use a spanner to unscrew the connecting nut.

3. When attaching the new tube make sure the rib

lines up with the groove on the control unit.

4. Tighten with the spanner.

Changing the TE-TB Precision Heater Hose Set

Precision Heater

Hose Set

Ref. TE-TB

Heating Element

Ref. 0012374 (100V - 230V - 120V)

Handle

Ref. 0012697

www.jbctools.com

Safety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station is

turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

1. Pull off the fuse holder and remove the

fuse. If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder

and replace it in the station.

Fuse holder

Fuse

12 13

Maintenance

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner or a damp cloth.

- Use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean

the metal parts.

- Maintain heating element clean prior to storage in order to avoid its oxidation.

Rusty and dirty surfaces reduce heat transfer.

- Periodically check all cables and tubes.

- Replace a blown fuse as follows:

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

www.jbctools.com

14 15

Exploded View

TE-1C 120V 50/60Hz. Input fuse 8A. Rated Current 6A. Control Unit model: JTE-1C

TE-2C 230V 50/60Hz. Input fuse 4A. Rated Current 3A. Control Unit model: JTE-2C

TE-9C 100V 50/60Hz. Input fuse 8A. Rated Current 7A. Control Unit model: JTE-9C

- Weight: 5.2 kg (11.4 lb)

- Dimensions: 148 x 184 x 140

- Nominal Power: 300W

- Temperature selection: Room temperature / 150ºC to 450°C (300ºF to 840ºF)

Cool mode: T Off. Used to blow air at room temperature

- Ambient Operating Temperature: 10 to 40ºC (50-104ºF)

- Idle Temp. Stability: +/-20 ºC (+/-36 ºF)

- Air flow regulation: 3-17 SLPM

- USB connector station-PC

- P-005 Pedal connector

Complies with CE standards

ESD protected housing “skin effect”

Specifications

www.jbctools.com

0015898-0215

www.jbctools.com

Warranty

JBC’s 2 year warranty covers this equipment

against all manufacturing defects, including the

replacement of defective parts and labour.

Warranty does not cover product wear due to use

or mis-use.

In order for the warranty to be valid, equipment

must be returned, postage paid, to the dealer

where it was purchased.

This product should not be thrown in the garbage.

In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life

must be collected and returned to an authorized recycling facility.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels jbc pistolet à souder

Manuels pistolet à souder populaires d'autres marques

Bakon

Bakon 3200 Manuel utilisateur

Proxxon

Proxxon Gaslotset MGS Manuel utilisateur

HAKO

HAKO FX-8804 Manuel utilisateur

SATA

SATA 02002A Manuel utilisateur

Velleman

Velleman HRJA151 Manuel utilisateur

Weller

Weller WSM 1 Manuel utilisateur

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instructions de montage

ersa

ersa i-CON 1V Manuel utilisateur

Hakko Electronics

Hakko Electronics FX-100 Manuel utilisateur

Weller

Weller WAD 101 Manuel utilisateur

Weller

Weller WXD 2 Manuel utilisateur

AlienTek

AlienTek T100 Manuel utilisateur

Atten

Atten ATETOOL AT-689A Manuel utilisateur

Surtek

Surtek 112554 Dimensions et guide d'installation

Parkside

Parkside PLBS 30 A1 Manuel utilisateur

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manuel utilisateur

Weller

Weller WX1 Manuel utilisateur

multicomp pro

multicomp pro MP740893 Manuel utilisateur

jbc TE-1C Manuel utilisateur

Manuels pistolet à souder populaires d'autres marques