IWILL VD133 Manuel utilisateur
1
EC Declaration of Conformity
We
IWILL Corporation
No. 10, Wu Chuan 3rd Rd.,
Hsin Chuang City, Taipei,
Taiwan, R.O.C.
Declare under sole responsibility that the
VD133 motherboard
Meets the intent of Directive 89/336/ECC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the official Journal of the European
Communities:
EN 50081-1 Emissions:
EN 55022 Radiated, Class B
EN 55022 Conducted, Class B
EN 60555-2 Power Harmonics
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge
IEC 801-3 RF Radiate
IEC 801-4 Fast Transient
2
About This Manual
This manual will introduce to the user how this product is installed. All useful information will be
described in later chapters. Keep this manual for future upgrades or system configuration changes.
Chapter 0 Overview
An overview of some special and basic features of the VD133 motherboard
Chapter 1 Features
The detailed features and specifications of the VD133 motherboard
Chapter 2 Quick Installation
The quick reference for experienced users
Chapter 3 Hardware Installation
The detailed information on jumper setting, connection, and hardware installation
Chapter 4 System BIOS Setup
The detailed information of the system BIOS setup options
Chapter 5 How to use Power Installer
The detailed information for installing software and tools
Copyright
This manual contains information protected by copyright law. All rights are reserved. No part of this
document may be used or reproduced in any form or by any means, or stored in a database or retrieval
system without prior written permission from IWILL Corporation.
This manual is subject to change without notice.
Trademark
Intel / Pentium are trademarks of Intel Corporation.
IWILL and IWILL logo are trademarks of IWILL Corp.
Sound Blaster is a registered trademark of Creative Technology Ltd.
Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.
All other product names are trademarks and registered trademarks of their respective owners.
Warning
Most of the features of this product have passed strict verification tests, and are subject to change at
any time without prior notice. If any malfunction occurs due to the future technical changes made by
the respective component manufacturers, IWILL assumes no responsibility or liability for it.
3
Contents
CHAPTER 0.................................................................................................5
OVERVIEW.................................................................................................5
CHAPTER 1.................................................................................................7
FEATURES...................................................................................................7
1.1 FEATURES ..............................................................................................7
1.2 ENVIRONMENT REQUIREMENTS...............................................................9
1.3 MOTHERBOARD COMPONENTS PLACEMENT...........................................10
1.4 BACK PANE CONNECTORS ....................................................................12
1.5 FORM FACTOR......................................................................................13
CHAPTER 2...............................................................................................15
QUICK INSTALLATION..........................................................................15
CHAPTER 3...............................................................................................19
HARDWARE INSTALLATION ................................................................19
3.1 PREPARATION AND INSPECTION .............................................................19
3.2 UNPACK THE VD133.............................................................................19
3.3 INSTALLATION PROCEDURE ...................................................................20
CHAPTER 4...............................................................................................30
SYSTEM BIOS SETUP..............................................................................30
4.1 INTRODUCTION.....................................................................................30
4.2 MAIN MENU.........................................................................................31
4.3 STANDARD CMOS SETUP ...............................................................32
4.4 BIOS FEATURES SETUP...................................................................35
4.5 CHIPSET FEATURES SETUP ............................................................39
4.6 POWER MANAGEMENT SETUP......................................................41
4.7 PNP/ PCI CONFIGURATION .............................................................45
4
4.8 INTEGRATED PERIPHERALS ..........................................................47
4.9 LOAD SETUP DEFAULTS.................................................................52
4.10 IWILL SMART SETTING.................................................................52
4.11 SUPERVISOR PASSWORD SETTING.............................................54
4.13 IDE HDD AUTODETECTION..........................................................54
4.14 SAVE & EXIT SETUP.......................................................................54
4.15 EXIT WITHOUT SAVING................................................................54
CHAPTER 5...............................................................................................55
HOW TO USE POWER INSTALLER......................................................55
5.1 SOFTWARE INSTALLATION.....................................................................55
5.2 HOW TO USE THE POWER INSTALLER CD ...............................................55
5.3 INSTALLING OPERATING SYSTEMS.........................................................61
5.4 HOW TO USE THE THERMAL SENSOR......................................................63
5.5 IWILL SCSI SERIES .............................................................................63
5
Chapter 0
Overview
Thank you for purchasing the IWILL VD133 motherboard. This operation manual will instruct you
how to configure and install the system properly. It contains an overview about the engineering
design and features of this product. Also, this manual provides useful information for later upgrades
or configuration changes. Keep this for your future reference.
VD133 FEATURES
The VD133 is the newest, most exciting motherboard in the market today. A step ahead of the
competition, the VD133 provides more power, convenience, and reliability for users. The VD133
has more speed, and is great for better, fast computer graphics. The VD133 has our special IWILL
SmartSetting—an easy way to set your CPU frequency—and also more versatile power-on functions,
all for your convenience. Furthermore, the VD133 has several power-saving modes to reduce energy
waste. All of these features are compacted in a dynamic motherboard that has the stability you
require in a powerful motherboard. Special features of the VD133 include:
lIWILL Smart Setting—allows easy setting of your CPU frequency, no jumpers
required!
lVersatile Power-On—you can power-on the system using a hot key, password, LAN,
or modem
lPower Management Setup—allows you to set Doze, Standby, and Suspend modes
lPower Failure Recovery—after a power failure, the system will automatically turn on
again once the power returns
The VD133 also includes some basic features, such as: 1 x Slot 1 for Pentium® III/II/Celeron
TM, VIA
Apollo Pro 133 chipset, 3 x DIMM slots, 5 x PCI slots, 2 x ISA slots, 1 x FDC floppy disk connector,
2 x IDE connectors, 2 x USB ports, 1 x PS/2 mouse, 1 x PS/2 keyboard ports, one parallel port, two
serial ports, ATX power connector, one Sound Blaster Link connector, and much, much more!
The VD133 has speed, convenience, and reliability, all wrapped up in one outstanding motherboard.
The VD133 is ahead of the pack. There is no other motherboard quite like it.
IWILL: Lead the way into the 21st century!
6
YEAR 2000 issue
The IBM compatible PC utilizes a Motorola MC146818 compatible Real-Time Clock (RTC) chip to
maintain the date and time. Unfortunately, the “century”is not manipulated by the RTC. It uses 8-
bits of information to report the year, and can only hold the last two digits of a year in packed BCD
format. For example, 1997 is reported solely as 97. Since the RTC also contains non-volatile
memory, IBM has specified a location in the memory to hold “century”information. By combining
the century data with the year data, software can obtain a full 4-digit year. When the Year 2000
arrives, the RTC reports the year as ’00’and the “century”in RTC memory will contain ’19.’
Combining the full 4-digit year yields 1900, not 2000. Any application which compare dates, or uses
relative dates to perform functions will see incorrect dates.
All motherboards contain BIOS, which is one of the key ingredients to check for systems designed to
handle the year 2000. All motherboards currently shipped from IWILL contain BIOS capable
of handling the year 2000 date correctly. The BIOS contains a feature that checks the least two
significant digits of the year stored in the RTC during each BIOS request (INT 1Ah) to read the date
and, if less than `80', updates the century byte to `20'. This feature enables operating systems and
applications using the BIOS date/time services to reliably manipulate the year as a four-digit value.
Be aware that the BIOS capability alone does not ensure that the system will handle the transition
correctly. Other system components such as the operating system and application software also need
to be able to handle the year 2000 date, and recognize the date format from other sources.
Peripherals and Devices
If you want to improve your system’s I/O performance, choose the latest IWILL SCSI controllers.
The following are some IWILL SCSI controllers you may purchase and use with your VD133
motherboard:
lSIDE 2930C: a fast SCSI for MO, CD-R, CD-R/W, CD-ROM. This
value/performance SCSI card connects up to 7 devices.
lSIDE 2930U+: a 20MB/Sec. transfer rate. A full function card, supports booting from
hard disk or CD-ROM, connects 7 devices
lSIDE 2935UW: 40 MB/sec transfer rate, 15 devices. The most stable product for an
efficient system
lSIDE 2935LVD: an 80MB/sec transfer rate, and a 12-meter cable length connecting 15
devices. Perfect solution for enthusiasts.
7
Chapter 1
Features
1.1 Features
1.1.1 Processor
Supports single Pentium®
III/II/CeleronTM processors
Supports 133 MHz, 100 MHz and 66 MHz bus speeds
Supports all published Pentium®
III/II/ CeleronTM processor voltages
Jumper inside selects the processor speed from 233 MHz to 500 MHz or higher
1.1.2 Core Logic
VIA-VT82C693A APOLLO PRO 133
Integrated DRAM controller
Integrated PCI bus mastering controller
Integrated Accelerated Graphics Port (AGP) bus controller
VIA-VT82C596B PCI / ISA / IDE Xcelerator
Multifunction PCI-to-ISA bridge (PCI Rev 2.1 compliant)
Integrated IDE controller with Ultra DMA/66 support
USB host interface with support for two USB ports
Enhanced DMA controller and standard Interrupt controller and Timer function
System Management Bus (SMB) with support for DIMM Serial PD
8
1.1.3 Main Memory
3 x 168-pin DIMM (Dual Inline Memory Module) sockets
The VD133 motherboard supports the following memory features:
JEDEC MO-161 compliant 168-pin DIMMs with gold-plated contacts
Supports up to 1.25 GB of 3.3 V Unbuffered SDRAM, Registered DIMM, or
60-ns Extended Data Out (EDO) memory
Single-sided or double-sided DIMMs (3.3 V memory module only)
64-bit data interface with ECC support (SDRAM only)
ECC logic detects multiple-bit errors and corrects single-bit errors (SDRAM)
16 / 64 Mbit DRAM technology
Symmetrical and asymmetrical DRAM addressing
1.1.4 Multi I/O
Winbond W83977 super I/O controller
Supports two floppy disk drives (include 3 Mode drive) and / or QIC-80 tape drive
Supports one multi-mode parallel port
Supports two high speed 16550 FIFO serial ports
Integrated keyboard controller
Integrated PS/2 mouse controller
Supports PS/2 Power-On function
Supports Power Failure Recovery
1.1.5 Expansion slots
1 x ISA Slot / IBM AT compliant.
4 x PCI slots / PCI Rev2.1 compliant.
1 x shared ISA/PCI slot.
1 x AGP slot / AGP Rev2.0 compliant.
1.1.6 Form Factor
Compliance with ATX Version 2.01 specification
Supports ATX power supply connector
Supports the remote on/off switch
Physical dimensions: length: 188 mm / width: 305 mm
9
1.1.7 Manageability
Winbond W83781 System Hardware Monitor built-in.
Wake on LAN header for use with add-in network interface cards (NICs)
Flash Control
Hardware Monitoring
Wake on modem
1.1.8 Other features
Award BIOS
Using 2Mbit Flash ROM to provide on-board-upgrade ability without changing components
Plug and Play compatible
Supports Advanced Power Management (APM)
Supports ACPI (Advanced Configuration Power Interface)
Supports Creative SB-LINK to deliver Sound Blaster 16 compatibility
Supports PC133
Supports ATA66 IDE I/O
1.2 Environment Requirements
Temperature 0-55 degrees C (operating or storage)
5% to 95% non-condensing relative humidity
At least a 250 W power supply
The power supply must comply with the following recommendations found in the specifications:
The potential relation between 3.3 VDC and +5 VDC power rails
The current capability of the +5VSB line
All timing parameters
10
1.3 Motherboard Components Placement
The following figure shows the location of the components on the VD133 motherboard.
FAN2 S2 LPT USB
WOL S1 KB
(bottom)
JP5 IR JP9 TEMP2 MS(top)
KB_ON
PWR
SLOT1
TEMP1
AGP
FAN1
DIMM0
DIMM1
DIMM2
ISAx
PCIx
JP42
FAN3
J43
TEMP3 JP1 JP11 IDE0 FDC
SB-LINK IDE1
PWR-ON JP12 JP10
Autres manuels pour VD133
1
Table des matières
Autres manuels IWILL Carte mère
IWILL
IWILL DP6NS Manuel utilisateur
IWILL
IWILL KK266 Manuel utilisateur
IWILL
IWILL piils Manuel utilisateur
IWILL
IWILL K7S3 Series Manuel utilisateur
IWILL
IWILL P4E Series Manuel utilisateur
IWILL
IWILL DP400 Manuel utilisateur
IWILL
IWILL Motherboard DJ800 Manuel utilisateur
IWILL
IWILL K7S2 Series Manuel utilisateur
IWILL
IWILL LE370 Manuel utilisateur
IWILL
IWILL P4DA Manuel utilisateur
IWILL
IWILL P4GB Series Manuel utilisateur
IWILL
IWILL DK8S Manuel utilisateur
IWILL
IWILL P4SE Series Manuel utilisateur
IWILL
IWILL DPX2-S320 Manuel utilisateur
IWILL
IWILL P4SP Manuel utilisateur
IWILL
IWILL VX133 Manuel utilisateur
IWILL
IWILL P55XU Manuel utilisateur
IWILL
IWILL DK8N Manuel utilisateur
IWILL
IWILL IWILL P4D-N Manuel utilisateur
IWILL
IWILL P55TV Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
