Intermatic ET700 SERIES Manuel du propriétaire

ET700 SERIES EASY-SET BASIC PROGRAMMING

RESET TIME SWITCH:

1. Set rotary dial in the AUTO position.

2. Press the RESET switch for 3-5 seconds to reset the

microprocessor memory and clear all programmed information.

The display should now show day 1 and 10:00 AM.

NOTE: Do not press the RESET switch after programming has begun

or you will loose all of your programmed information.

TO SET PRESENT TIME AND DAY OF WEEK:

1. Place the rotary dial in the SET position.

2. Press the touch pad for the present day of week.

3. Press the hour and minute for the current time of day.

4. Press AM or PM button.

5. Press CLOCK button.

6. To verify that the correct time and day is set, set rotary dial to

the AUTO position and current time and day should be

displayed.

NOTE: If the current time and day are incorrect, repeat steps 2-6.

TO PROGRAM TIMES:

1. Place the rotary dial in the SET position.

2. Press the touch pad button for the first day to be programmed.

3. Press the hour, minute, AM or PM for the first on time.

4. Press the ON button.

5. Press the hour, minute, AM or PM for the first off time.

6. Press the OFF button.

7. Continue to program each day of the week repeating steps 2-6.

8. When finished set the rotary dial to the AUTO position.

NOTE: If you wish to copy a days on and off times to another day

after step 6 make sure the rotary dial in turned to the SET position,

press the touch pad for the day copied to eg. (Monday day 2) press

2, press the ON button, then press the touch pad for the day copied

from eg. (Sunday day 1) press 1, so press 2 ON 1, 3 ON 1, 4 ON 1

etc.

TO REVIEW PROGRAMMED TIMES:

1. Place the rotary dial to the REVIEW position.

2. Press the touch pad button corresponding to the day being

reviewed.

3. Press the ON button to display the on programmed time(s).

4. Press the OFF button to display the off programmed time(s).

NOTE: If you review a day that was copied from another day when

you perform step #2, the display will show – 1. eg. You want to

review day 2 Monday which you copied from day 1 Sunday so you

press the touch pad 2 to review and the display will show 2 – 1.

TO CHANGE PROGRAMMED TIMES:

1. Review the program as previously explained until the time is

displayed you want to change.

2. Press CLEAR.

3. Then place the rotary dial to the SET position.

4. Now depress the touch pad day button, press the new hour,

minute, AM or PM.

5. Then depress the ON or OFF button.

6. When finished return the rotary dial to the AUTO position for

normal operation.

TO DELETE A PROGRAMMED TIME:

1. Review the program as previously explained until the time is

displayed you want to delete.

2. Press CLEAR.

3. Return the rotary dial to the AUTO position.

TO OVERRIDE PROGRAM:

Program can be overridden at any time by placing the rotary dial to

the Manual position. Programmed set times will be maintained but

will not operate the controlled load automatically.

TO MANUALLY OPERATE LOAD:

1. Place the rotary dial to either the AUTO or MANUAL position.

2. Press the ON or OFF button.

3. The red indicator lamp will illuminate for ON or extinguish for

OFF.

TO OPERATE TIMER:

Place the rotary dial to the AUTO position.

NOTE: When finished programming you may have to toggle your

load ON or OFF depending on the state it should be in at that time of

day by depressing the ON or OFF button.

NOTE: For assistance please contact Intermatic Technical Services

at 815-675-7000.

Table des matières

Autres manuels Intermatic Changer

Intermatic

Intermatic T101 Manuel

Intermatic

Intermatic EMRS-W-D Manuel utilisateur

Intermatic

Intermatic T7402B Manuel

Intermatic

Intermatic T1471BR Manuel

Intermatic

Intermatic T171CR Manuel

Intermatic

Intermatic ET1700 Series Mode d’emploi

Intermatic

Intermatic EH10 Manuel utilisateur

Intermatic

Intermatic T8805P101C Manuel

Intermatic

Intermatic WH21 Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

Intermatic

Intermatic Turnus Manuel utilisateur

Intermatic

Intermatic ET102CM Manuel utilisateur

Intermatic

Intermatic T173CR Manuel

Intermatic

Intermatic ET170 SERIES Manuel du propriétaire

Intermatic

Intermatic T104-20 Manuel

Intermatic

Intermatic FM1D20A Manuel utilisateur

Intermatic

Intermatic T7801B Manuel

Intermatic

Intermatic T7802BC Manuel

Intermatic

Intermatic ET171CR Manuel

Intermatic

Intermatic GM40AVE-RD89 Series Manuel utilisateur

Intermatic

Intermatic ET2815C Manuel

Intermatic

Intermatic HA18 Caractéristiques techniques

Intermatic

Intermatic TSM1 Series Manuel utilisateur

Intermatic

Intermatic ET70815CR Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur