Intermatic ET170 SERIES Manuel du propriétaire

ET170 SERIES EASY-SET BASIC PROGRAMMING

RESET TIME SWITCH:

1. Place the two position switch to CLK and the three position

switch to AUTO.

2. Depress the RESET switch for 3-5 seconds to reset the

microprocessor memory and clear all programming

information. The display will flash 12:00 AM.

NOTE: Do not press the RESET switch after programming has begun

or you will loose all of your programmed information.

TO SET PRESENT TIME AND DAY OF WEEK:

1. Place the two position switch to CLK and the three position

switch to PROGRAM.

2. Press the HOUR, MIN, and DAY buttons individually to select

the current time of day and current day of week. (day 1 is

Sunday, day 2 is Monday, etc.)

3. Place the three position switch to AUTO. The display should

now show the current time of day and current day of week.

TO PROGRAM TIMES:

1. Place the two position switch to OUTPUT and the three

position switch to PROGRAM.

2. To enter the first ON set point, depress the DAY button to

select the day the event will occur.

3. Press the HOUR and MIN buttons individually to program the

first ON event. The ON will flash.

4. Press the ENTER button to enter that set point and the ON will

stop flashing indicating acceptance. If this ON set point is to

occur on other days of the week, press the DAY button to

select the next day and then press ENTER. Repeat for

additional days.

5. To enter the first OFF set point, overwrite the ON time with the

OFF time (HOUR and MIN) desired, the ON will flash.

6. Press the ON/OFF button once to toggle the flashing ON to a

flashing OFF.

7. Press ENTER to enter that set point and the OFF will stop

flashing indicating acceptance. If this OFF set point is to occur

on other days of the week, press the DAY button to select the

next day and then press ENTER. Repeat for additional days.

8. When finished programming place the two selector switch to

OUTPUT and the three selector switch to AUTO.

NOTE: If F:UL is displayed while entering programmed times, you

have entered too many set points beyond the 20 allowed for the

week.

TO REVIEW PROGRAMMED TIMES:

1. Place the two position switch to OUTPUT and the three

position switch to PROGRAM.

2. Press the ENTER button to review all ON and OFF

programmed times until you see E:nd.

TO CHANGE PROGRAMMED TIMES:

1. Place the two position switch to OUTPUT and the three

position switch to PROGRAM.

2. Press the ENTER button until the desired time to change is

displayed.

3. Press the HOUR and MIN buttons to change to the desired

time.

4. Press the ENTER button.

TO DELETE A PROGRAMMED TIME:

1. Place the two position switch to OUTPUT and the three

position switch to PROGRAM.

2. Press the ENTER button until the desired time to delete is

displayed.

3. Press the ON/OFF button twice to delete that time. The

display will now show -:--.

TO OVERRIDE PROGRAM:

Program can be overridden at any time by placing the three position

switch to MANUAL. Programmed set points will be maintained but

will not operate the controlled load automatically. To restore

automatic operation, place the three position selector back to the

AUTO position.

TO MANUALLY OPERATE LOAD:

1. Place the two position switch to OUTPUT.

2. Place the three position switch to either AUTO or MANUAL.

3. Press the ON/OFF button and the display will show your load

toggle ON or OFF.

TO OPERATE TIMER:

Place the two position switch to OUTPUT and the three position

switch to AUTO.

NOTE: When finished programming you may have to toggle your load

ON or OFF depending on the state it should be in at that time by

depressing the ON/OFF button.

NOTE: For assistance please contact Intermatic Technical Services

at 815-675-7000.

Table des matières

Autres manuels Intermatic Changer

Intermatic

Intermatic WH40 Manuel utilisateur

Intermatic

Intermatic EI500 Series Mode d’emploi

Intermatic

Intermatic T1975E Manuel

Intermatic

Intermatic T1471BCR Manuel

Intermatic

Intermatic T7801B Manuel

Intermatic

Intermatic HB12R Manuel

Intermatic

Intermatic ET1100 Series Mode d’emploi

Intermatic

Intermatic ET2825C Manuel

Intermatic

Intermatic ET102C Manuel utilisateur

Intermatic

Intermatic ET8000 Series Mode d’emploi

Intermatic

Intermatic T173CR Manuel

Intermatic

Intermatic ET70115C Manuel utilisateur

Intermatic

Intermatic T7802BC Manuel

Intermatic

Intermatic GrasslinFM1D20 Series Manuel utilisateur

Intermatic

Intermatic WH21 Manuel utilisateur

Intermatic

Intermatic ET101C Manuel utilisateur

Intermatic

Intermatic FM2D50 Series Manuel utilisateur

Intermatic

Intermatic Grasslin talento smart CE2 Manuel utilisateur

Intermatic

Intermatic ET105C Manuel

Intermatic

Intermatic EMKB Manuel utilisateur

Intermatic

Intermatic T175 Manuel

Intermatic

Intermatic CA600 Manuel utilisateur

Intermatic

Intermatic R8816P101C Manuel

Intermatic

Intermatic T1976 Manuel

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur