Interlogix VD-IP-XP4DNP Manuel utilisateur

UVD-IP-XP4DNR(-P)

Camera User Manual

P/N 1072545A-EN • REV 1.0• ISS 18JUN12

Trademarks and

patents

The Interlogix and UltraView names and logos are trademarks of

UTC Fire & Security.

Other trade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacturer UTC Fire & Security Americas Corporation, Inc.

2955 Red Hill Avenue, Costa Mesa, CA 92626 5923, USA.

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

N4131

FCC compliance Class A: This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to

correct the interference at his own expense.

ACMA compliance Notice! This is a Class A product. In a domestic environment this

product may cause radio interference in which case the user may

be required to take adequate measures.

Canada This Class A digital apparatus complies with Canadian ICES-

003.

Cet appareil numérique de la class A conforme à la norme NMB-

003 du Canada.

European Union

directives

2004/108/EC (EMC directive): Hereby, UTC Fire & Security

declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive

2004/108/EC

2002/96/EC (WEEE directive): Products marked with this

symbol cannot be disposed of as unsorted municipal waste in

the European Union. For proper recycling, return this product to

your local supplier upon the purchase of equivalent new

equipment, or dispose of it at designated collection points. For

more information see: www.recyclethis.info.

Contact information For contact information see our Web site: www.interlogix.com,

www.utcfssecurityproducts.eu

UVD-IP-XP4DNR(-P) Camera 1 - EN

Contents

Introduction 2

Product description 2

Features 2

User guidelines 2

Package contents 3

Plenum-compliant cabling 3

Installation 4

Viewing the camera via a digital (IP) connection 4

Software requirements 4

Connecting analog cables 6

Installing the camera 6

Angle adjustment 6

Zoom and focus adjustment 7

Connecting an analog monitor to set camera functions 8

Setting camera functions 8

White balance (WB) 8

Backlight compensation (BLC) 8

AI/AE exposure 8

Day/Night 9

Resolution 9

Flickerless control 9

Reset to factory default settings 10

EN - 2 UVD-IP-XP4DNR(-P) Camera

Introduction

This user manual provides basic information on setting up and using

the UVD-IP-XP4DNR(-P) Camera.

Product description

The UVD-IP-XP4DNR(-P) color video camera uses a digital signal

processor (DSP) to process video signals. The video camera includes

a microcontroller to provide high-quality images in changing lighting

environments with high-color reproduction and sharp pictures.

Features

Camera features include:

• H.264-SVC video compression with multistream capability.

• Pixim Seawolf technology

• Excellent performance in almost any lighting conditions

• Supports up to 4CIF resolution (540 HTVL analog).

• True day/night (removable IR cut filter) • Long life and high

reliability.

• DIP switch control of camera settings.

• Power over Ethernet (PoE) or Isolated switching power 12 VDC or

24 VAC.

• Vandal-resistant housing.

User guidelines

Use the following guidelines:

• Take appropriate safety precautions while completing

programming after installation.

• Always use a proper PoE switch or a 12 VDC or 24 VAC UL listed

Class 2 power supply to power the camera.

• Do not use the camera outside the temperature range

specifications: -30 to +50°C (-22 to +122°F)

UVD-IP-XP4DNR(-P) Camera 3 - EN

• If the light source where the camera is installed experiences rapid,

wide-variations in lighting, the camera may not operate as

intended.

WARNING: To reduce the risk of fire or electronic shock, do not

expose the camera to rain or moisture and do not remove the cover or

back.

Package contents

The UVD-IP-XP4DNR(-P) camera is shipped with the following items:

• The camera assembly

• 1 channel passive video transceiver

• AC power wiring harness

• Mounting screws, wall anchors, and hex key

• 150 mm DC jack to terminal adapter

Use the video output BNC and power jack for normal system

operation.

Figure 1: Camera assembly

Camera body

RJ45 Ethernet/PoE input

24 VAC / 12 VDC input

Video output (BNC)

Plenum-compliant cabling

The cable connections must be enclosed in a suitable metallic, or other

fire-resistant, low-smoke producing enclosure. The cabling used within

EN - 4 UVD-IP-XP4DNR(-P) Camera

the air space must be specifically marked for that purpose or enclosed

in a conduit.

Re-route the leads from the camera so they exit from the threaded

knockout on the side of the camera (see Figure 2 below.) Move the

plug from the side threaded knockout and place it on the knockout on

the base of the camera.

Figure 2: Plenum-compliant cabling

1. Plenum-rated conduit

2. Box for connections

3. Threaded knockouts

4. Ceiling

5. Camera body

6. Trim ring

Installation

To install the camera you will need to prepare the mounting surface,

make cable connections, and mount the camera.

Viewing the camera via a digital (IP) connection

You can connect the IP camera to a network and view the images

through a browser. To view via a Network Video Recorder or similar

digital video system, please refer to the documentation associated with

that system.

Software requirements

The UVD-IP camera requires:

Microsoft Internet Explorer

UVD-IP-XP4DNR(-P) Camera 5 - EN

A VLC player ActiveX plug-in is required to play video when

Internet Explorer is used to monitor the camera.

Figure 3: ActiveX plug-in option

To configure the camera:

1. Configure the UVD-IP camera with a default IP address: 10.1.2.11

2. Configure your host PC/laptop within the same subnet, ex:

10.1.2.10

3. Connect the URL http://10.1.2.11 with Internet Explorer.

4. Select the “Live” menu to view live video.

5. Enter the following username and password to access the

Maintenance menu.

Password: admin

The IP address of the camera can be changed from the

Maintenance menu.

6. Reboot the camera for the changes to take effect.

EN - 6 UVD-IP-XP4DNR(-P) Camera

Connecting analog cables

To connect the cables:

1. Connect a coaxial cable from the camera’s BNC connector to a

CCTV monitor or video recording device.

2. Connect a PoE switch, a 12 VDC or 24 VAC power supply to the

power input. Do not connect both the PoE connection and DC or

AC connection at the same time. The label on the camera gives

the following information:

Red cable. Power in.

Black cable. Power in.

White cable. Video out.

Black cable. Video ground.

Note: For 24 VAC or 12 VDC, Black or Red may be used for ground.

Installing the camera

To mount the camera, attach the camera to the mounting surface using

the appropriate fasteners.

Angle adjustment

To adjust the horizontal angle of the platform up to 180 degrees, turn

the platform (Figure 4 on page 7).

To adjust the horizontal angle of the rotor up to 350 degrees, turn the

rotor on the platform (Figure 4 on page 7).

To adjust the vertical angle of the platform up to 90 degrees, turn the

platform (Figure 4 on page 7).

UVD-IP-XP4DNR(-P) Camera 7 - EN

Figure 4: Camera adjustment

Platform horizontal adjustment

Platform vertical adjustment

Rotor horizontal adjustment

Zoom and focus adjustment

See Figure 5 below for the location of the zoom and focus ring

thumbscrews.

Figure 5: Zoom and focus adjustment

Zoom ring thumbscrew for

VA2 and focus ring for

VA9 lens

Focus ring thumbscrew for

VA2 and zooming ring for

VA9 lens

To adjust the camera zoom and focus:

1. Loosen the zoom ring thumbscrew.

2. Turn the zoom ring to set the desired zoom.

3. Tighten the zoom ring thumbscrew.

4. Loosen the focus ring thumbscrew.

5. Turn the focus ring to set the desired focus.

6. Tighten the focus ring thumbscrew.

EN - 8 UVD-IP-XP4DNR(-P) Camera

Connecting an analog monitor to set camera

functions

Connect a standard video monitor to the system to adjust the quality of

the video image using the DIP switches. The DIP switches can also be

adjusted when connected to the IP system.

To connect a video monitor:

1. Plug the monitor output cable to the video monitor output

connector (see Figure 1 on page 3).

2. Connect the BNC cable to the video monitor.

3. Adjust the DIP switches as desired.

Setting camera functions

You can set up six camera functions using the DIP switch bank on the

back of the camera. Figure 6 on page 9 shows the DIP switch layout.

White balance (WB)

White balance tells the camera what the color white looks like. Based

on this information, the camera will then display all colors correctly.

There are two methods to determine the WB:

• ATW (auto tracking white balance). The value used depends on

the lighting condition selected. It ensures reliable color

reproduction when lighting conditions change frequently.

• PTL (push-to-lock) white balance. WB is fixed at the moment the

DIP switch it set to ON.

Backlight compensation (BLC)

The backlight compensation function improves image quality when the

background illumination is high. It prevents the object in the center

from appearing too dark.

AI/AE exposure

Use this setting to select the method the camera uses to adjust to

different light levels. Use the Automatic Iris (AI) setting to fix the iris

value at F1.6. Use Auto Exposure (AE) setting to automatically set the

proper exposure according to the existing light conditions.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Interlogix Caméra IP

Interlogix

Interlogix UltraSync RS-3230 Manuel utilisateur

Interlogix

Interlogix TruVision Open Standards Comment utiliser

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TruVision TVT-2201 Manuel utilisateur

Interlogix

Interlogix TVB-1101 Manuel utilisateur

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix VC-IP-XP4DN-HR Manuel utilisateur

Interlogix

Interlogix TruVision Line Feuille d'instructions

Interlogix

Interlogix TruVision TVB-4409 Manuel

Interlogix

Interlogix TruVision Bullet IR TVC-BIR6-SR Manuel utilisateur

Interlogix

Interlogix TVD-TIR6-MR Manuel utilisateur

Interlogix

Interlogix TVB-2203 Manuel utilisateur

Interlogix

Interlogix TruVision 11/31 Series Manuel utilisateur

Interlogix

Interlogix UltraSync RS3130 Manuel utilisateur

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TruVision Line Feuille d'instructions

Interlogix

Interlogix TVC-5125BE-3 Manuel utilisateur

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TruVision 6 Series Manuel utilisateur

Interlogix

Interlogix TVB-1101 Feuille d'instructions

Interlogix

Interlogix TruVision TVC-1201 Feuille d'instructions

Interlogix

Interlogix TruVision TVT-2202 Manuel utilisateur

Interlogix

Interlogix TruVision Line Feuille d'instructions

Interlogix

Interlogix TruVisioin 12 Series Manuel utilisateur

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur