Interlogix TVD-2202 Manuel utilisateur

TruVision IR

Dome Camera

TVD

-2202/TVD-4202

Installation

Guide

P/N 1072923 • REV A • ISS 10FEB15

Installation Guide 1

Contents

Product overview 2

Camera description 4

Installation 5

Programming 9

Specifications 10

Setup menu 11

Regulatory information 12

2 Installation Guide

Product overview

This is the TruVision IR Dome Camera Installation

Guide for models TVD-2202/TVD-4202. This guide

describes a standard installation.

Package contents:

Camera with power

and video output

cables

4 M4 screws (4 x

25 mm) and 4 dry

wall anchors (Ø7.5

x 24.5 mm) for wall

or ceiling

installation

Template

Back box

Installation Guide 3

3 M4 screws (3 x

25 mm) screws to

install the camera

to the back box

Hex wrench

•WEEE and Battery

Disposal

Monitor output

cable

CD

Installation Guide

4 Installation Guide

Camera description

1. Dome liner

2. Bubble

3. Auxiliary video

output

4. Menu button

5. Power cable

6. Video cable

7. Lens

8. Back box

Installation Guide 5

Installation

To install the camera:

1. Using the template, place it level against the

mounting surface and mark the position of the

mounting holes.

2. Following all local codes, drill and prepare the

mounting holes.

3. Remove the camera from its back box.

4. Loosen the three set screws on the edge of the

bubble with the supplied hex wrench. Remove

the bubble and the dome liner.

6 Installation Guide

4. Secure the back box to the ceiling with the

supplied screws.

5. Connect a 75-ohm coaxial video cable to the

video cable and a power supply to the power

cable.

6. Align the camera with the back box and tighten

the set screws to secure the camera to the

back box.

Installation Guide 7

7. Adjust the surveillance angle:

1) View the camera image on a monitor.

2) Rotate the panning table to adjust the pan

direction [0 to 355°].

3) Loosen the tilting lock screw.

4) Rotate the tilting table to adjust the tilt

direction [0 to 90°].

5) Tighten the tilting lock screw.

6) Rotate the camera lens holder [0 to 355°]

to adjust the lens to the surveillance angle.

8 Installation Guide

8. Zoom and focus adjustment.

1) View the camera image using the monitor.

2) Loosen the zoom lever and move the

screw between T (Tele) and W (Wide) to

obtain the appropriate angle of view.

3) Tighten the zoom lock screw.

4) Loosen the focus lever and move the

screw between F (Far) and N (Near) to

obtain the optimum focus.

5) Tighten the focus lock screw.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Interlogix Caméra IP

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TVB-1101 Manuel utilisateur

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TruVision Line Feuille d'instructions

Interlogix

Interlogix TruVision Line Manuel utilisateur

Interlogix

Interlogix TruVisioin 12 Series Manuel utilisateur

Interlogix

Interlogix TruVision TVC-1201 Feuille d'instructions

Interlogix

Interlogix VC-IP-XP4DN-HR Manuel utilisateur

Interlogix

Interlogix FW5.1 Manuel utilisateur

Interlogix

Interlogix TVB-5302 Feuille d'instructions

Interlogix

Interlogix UltraSync RS-3230 Feuille d'instructions

Interlogix

Interlogix TruVision 11/31 Series Manuel utilisateur

Interlogix

Interlogix TruVision Open Standards Comment utiliser

Interlogix

Interlogix TVB-1101 Manuel utilisateur

Interlogix

Interlogix TruVision TVP-1101 Feuille d'instructions

Interlogix

Interlogix TruVision 11 Series Manuel utilisateur

Interlogix

Interlogix UltraSync RS-3230 Manuel utilisateur

Interlogix

Interlogix 1073033-EN Manuel utilisateur

Interlogix

Interlogix VD-IP-XP4DNP Manuel utilisateur

Interlogix

Interlogix TruVision TVT-2201 Manuel utilisateur

Interlogix

Interlogix TruVision Series TVQ-8101 Manuel utilisateur

Interlogix

Interlogix UltraView IP XP4 Box Day/Night Range Camera Manuel utilisateur

Interlogix

Interlogix TruVision TVF-5201 Feuille d'instructions

Manuels Caméra IP populaires d'autres marques

FLIR

FLIR Exx series Manuel utilisateur

Avigilon

Avigilon H4A-BO1-IR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuel utilisateur

ShareTech

ShareTech AV1 Manuel utilisateur

Ezviz

Ezviz C6C Manuel utilisateur

Melchioni

Melchioni UCAM 2015 Manuel utilisateur

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuel utilisateur

Mitel

Mitel 6800i Series Manuel de service

Vitek

Vitek VTC-IR403-212NP Manuel utilisateur

THOMSON

THOMSON DSC - 323W Manuel utilisateur

AVer

AVer FB2027 Manuel utilisateur

ENFORCER

ENFORCER EV-T5105-N2SQ Manuel utilisateur

Wansview

Wansview NC543 Manuel utilisateur

Eneo

Eneo MCB-64A0003M0A Manuel utilisateur

deView electronics

deView electronics CBDNI36F Manuel utilisateur

Swann

Swann SwannEye Manuel utilisateur

LevelOne

LevelOne IP CamSecure Manuel utilisateur