Intellinet 503631 Manuel utilisateur

Fast

EthErnEt

rackmount

PoE switch

usEr

manual

MODELS 503631

& 524155

INT-503631/524155-UM-0408-01

introduction

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™

Fast Ethernet Rackmount PoE Switch, Model 503631 or Model 524155.

Sixteen 10/100 Base-TX ports that support the 802.3af Power over

Ethernet protocol means that any devices that are 802.3af compliant —

such as IP phones, wireless access points and network cameras — can

be attached to the switch without the need for additional power to support

them. This eliminates the time and expense of electrical power rewiring,

and minimizes the clutter of power supplies and adapters in awkward

places such as ceilings and walls.

Besides providing 802.3af PoE functionality, this handy device offers

some very impressive features as a switch. For starters, auto features

make installation Plug and Play and hassle free: No conguration is

required. Auto-MDI/MDI-X crossover on all ports eliminates the need

for crossover cables for connection to another switch or hub. Auto-

Negotiation on each port senses the link speed of a network device

(either 10 or 100) and intelligently adjusts for compatibility and optimal

performance.

Easy-to-follow instructions in this user manual help make installation

of the switch quick and simple, so you’ll also soon be enjoying the

benets of these additional features:

• Full-power Class 2 (Model 524155) or Class 3 (Model 503631) PoE

design

• Power output up to 7.3 Watts (Model 524155) or 15.4 Watts (Model 503631)

per port

• Store and forward switching architecture

• Full/half duplex operation

• Supports 4096 MAC address entries

• 200 kBytes buffer memory

• 19” rackmount metal case

• LEDs for power, link/activity and PoE

• Lifetime Warranty

FCC Warning

This device has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses and radiates radio frequency energy and,

if not installed and used in accordance with the user manual, may cause

interference, which the user will be required to correct at his own expense.

CE Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to take

adequate measures.

Ports & indicators

Ports

The 16 RJ-45 connections on the front panel (partially shown in the image

below) match workstations, servers or other network devices to 10/100

Mbps switching ports that sense 10/100Mbps speed and automatically

negotiate full/half duplex mode, allowing you to connect the switch to

10Base-T and 100Base-TX devices. NOTE: The 16 ports also provide a

48 V power-injector PSE (power source equipment) function (see

Connections).

PoE

LEDs

The front-panel LEDs (at left in image above) will be on (lighted), off or

blinking/ashing, indicating function status as follows.

POWER On: The switch has power and is ready for use.

Off: The switch has no power.

LINK/ACT On: The port is ready for 10/100 Mbps connection.

Flashing: Data is being transmitted/received at 10 Mbps.

PoE On: A PoE device is connected to the port.

Off: A non-PoE device is connected to the port.

connEctions

Power

The AC power outlet and switch are on

the rear panel (as shown at right).

PCs, Servers and Other Network Devices

Use Cat5 straight-through twisted-pair cables

to congure a network environment such

as the one shown at right.

Hubs and Other Switches

Use either straight-through or crossover cable to connect to the uplink port

of a hub or another switch: This device supports Auto-MDIX on all ports.

Powered Devices

Use Cat5 twisted-

pair cable to supply

48 V to a powered

device connected to any

of the 16 ports. NOTE:

Any connected devices should

also be IEEE 802.3af compliant.

OFF

PoE Switch

sPEciFications

Standards

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3u (100Base-TX Fast Ethernet)

• IEEE 802.3x (ow control, full duplex mode)

• IEEE 802.3af (Power over Ethernet)

General

• Media support:

- 10Base-T Cat3, 4, 5 UTP/STP RJ-45

- 100Base-TX Cat5 UTP/STP RJ-45

• Ports: 16 RJ-45 10/100 Mbps PoE ports

• Packet lter/forwarding rate: 148,800 pps (100 Mbps); 14,880 pps (10 Mbps)

• Certications: FCC Class A, CE Mark

LEDs

• Power, Link/activity for 10 and 100 Mbps, PoE

Power

• Input: 90 – 260 V AC, 50 – 60 Hz

• Power consumption, Model 524155: 120 Watts max.

• Power consumption, Model 503631: 250 Watts max.

Environmental

• Metal housing

• Dimensions: 440 (W) x 220 (L) x 44 (H) mm (17.3 x 8.6 x 1.7 in.)

• Weight, Model 524155: 3.5 kg (7.7 lbs.)

• Weight, Model 503631: 3.8 kg (8.4 lbs.)

• Operating temperature: 0 – 60°C (32 – 140°F)

• Operating humidity: 10 – 90% RH, non-condensing

• Storage temperature: -20 – 90°C (-4 – 194°F)

Package Contents

• Fast Ethernet Rackmount PoE Switch, Model 503631 or 524155

• Power cable

• User manual

INTELLINET NETWORK SOLUTIONS™offers a complete line

of active and passive networking products.

Ask your local computer dealer for more information or visit

www.intellinet-network.com.

SOLUTIONS

All products mentioned are trademarks or registered trademarks of their respective owners.

Autres manuels pour 503631

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Intellinet Changer

Intellinet

Intellinet 502023 Manuel utilisateur

Intellinet

Intellinet 502023 Manuel utilisateur

Intellinet

Intellinet 561969 Manuel utilisateur

Intellinet

Intellinet 561334 Manuel utilisateur

Intellinet

Intellinet 523783 Manuel utilisateur

Intellinet

Intellinet 503358 Manuel utilisateur

Intellinet

Intellinet 561228-V2 Manuel utilisateur

Intellinet

Intellinet 560801 Manuel utilisateur

Intellinet

Intellinet 503501 Manuel utilisateur

Intellinet

Intellinet 508261 Manuel utilisateur

Intellinet

Intellinet 524148 Manuel utilisateur

Intellinet

Intellinet 561587 Manuel utilisateur

Intellinet

Intellinet 503631 Manuel utilisateur

Intellinet

Intellinet IPS-54GM06-10G-450W Manuel utilisateur

Intellinet

Intellinet 524629 Manuel utilisateur

Intellinet

Intellinet 561877 Manuel utilisateur

Intellinet

Intellinet 561808 Manuel utilisateur

Intellinet

Intellinet 561358 Manuel utilisateur

Intellinet

Intellinet Cat5e 162470 Manuel utilisateur

Intellinet

Intellinet 560764 V1 Series Manuel utilisateur

Intellinet

Intellinet 524063 Manuel utilisateur

Intellinet

Intellinet 561204 Manuel utilisateur

Intellinet

Intellinet 506540 Manuel utilisateur

Intellinet

Intellinet 561280 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur