Intel E7500 Mode d’emploi

Intel®E7500 Chipset

Design Guide

E7500 Memory Controller Hub (MCH) Thermal and Mechanical

Design Guidelines

February 2002

Document Number: 298647-001

2Intel®E7500 MCH Thermal and Mechanical Design Guidelines

Information in this document is provided in connection with Intel®products. No license, express or implied, by estoppel or otherwise, to any intellectual

property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability

whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to

fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not

intended for use in medical, life saving, or life sustaining applications.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for

future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

The Intel®E7500 chipset MCH may contain design defects or errors known as errata which may cause the product to deviate from published

specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from:

Intel Corporation

www.intel.com

or call 1-800-548-4725

Intel, Xeon, and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others.

Intel®E7500 MCH Thermal and Mechanical Design Guidelines 3

Contents

1 Introduction..........................................................................................................................7

1.1 Design Flow ............................................................................................................8

1.2 Definition of Terms..................................................................................................9

1.3 Reference Documents..........................................................................................10

2 Packaging Technology ......................................................................................................11

3 Thermal Simulation............................................................................................................13

4 Thermal Specifications......................................................................................................15

4.1 Power....................................................................................................................15

4.2 Die Temperature...................................................................................................15

5 Thermal Metrology.............................................................................................................17

5.1 Die Temperature Measurements..........................................................................17

5.1.1 90° Angle Attach Methodology..............................................................17

5.1.2 0° Angle Attach Methodology................................................................18

5.2 Power Simulation Software...................................................................................20

6 Reference Thermal Solutions............................................................................................21

6.1 Operating Environment.........................................................................................21

6.2 Mechanical Design Envelope................................................................................21

6.3 Thermal Solution Assembly..................................................................................23

6.3.1 Heatsink Orientations............................................................................25

6.3.2 Extruded Heatsink Profiles....................................................................26

6.3.3 Mechanical Interface Material ...............................................................27

6.3.4 Thermal Interface Material ....................................................................27

6.3.5 Heatsink Clip.........................................................................................27

6.3.6 Clip Retention Anchors..........................................................................28

6.3.7 Board Level Component Keep-out Dimensions....................................28

6.4 Reliability Requirements .......................................................................................30

Appendix A: Thermal Solution Component Suppliers............................................................................31

Appendix B: Mechanical Drawings.........................................................................................................33

4Intel®E7500 MCH Thermal and Mechanical Design Guidelines

Figures

Figure 1. Thermal Design Process......................................................................................8

Figure 2. Intel®E7500 MCH Package Dimensions (Side View)........................................11

Figure 3. Intel®E7500 MCH Package Dimensions (Top View).........................................12

Figure 4. 90° Angle Attach Methodology...........................................................................18

Figure 5. 0° Angle Attach Methodology (Top View)...........................................................19

Figure 6. 0° Angle Attach Heatsink Modifications..............................................................19

Figure 7. Thermal Solution Decision Flowchart.................................................................20

Figure 8. Reference Heatsink Volumetric Envelope for the Intel®MCH............................22

Figure 9. Reference Thermal Solution Assembly..............................................................23

Figure 10. Reference Thermal Solution Assembly (Side View).........................................24

Figure 11. Reference Thermal Solution (Top View)..........................................................24

Figure 12. Preferred Heatsink Orientation.........................................................................25

Figure 13. Extruded Heatsink Profile.................................................................................26

Figure 14. Alternate Tall Heatsink Profile..........................................................................26

Figure 15. Heatsink Mechanical Gasket, Optional Two-Piece ..........................................27

Figure 16. Heatsink Retention Mechanism Layout............................................................28

Figure 17. Retention Mechanism Component Keep-out Zones ........................................29

Figure 18. Intel®MCH Heatsink Assembly........................................................................34

Figure 19. Intel®MCH Heatsink Clip..................................................................................35

Tables

Table 1. Intel®E7500 MCH Thermal Specifications..........................................................15

Table 2. Reliability Requirements......................................................................................30

Table 3. Complete Thermal Solution Kits..........................................................................31

Table 4. Extruded Heatsinks .............................................................................................31

Table 5. Interface Materials...............................................................................................32

Table 6. Attach Hardware..................................................................................................32

Intel®E7500 MCH Thermal and Mechanical Design Guidelines 5

Revision History

Revision

Number Description Date

-001 Initial Release. February 2002

6Intel®E7500 MCH Thermal and Mechanical Design Guidelines

This page is intentionally left blank.

Introduction

Intel®E7500 MCH Thermal and Mechanical Design Guidelines 7

1 Introduction

As the complexity of computer systems increases, so do the power dissipation requirements. Care

must be taken to ensure that the additional power is properly dissipated. Heat can be dissipated

using improved system cooling, selective use of ducting, and/or passive heatsinks.

The objective of thermal management is to ensure that the temperatures of all components in a

system are maintained within functional limits. The functional temperature limit is the range within

which the electrical circuits can be expected to meet specified performance requirements.

Operation outside the functional limit can degrade system performance, cause logic errors, or

cause component and/or system damage. Temperatures exceeding the maximum operating limits

may result in irreversible changes in the operating characteristics of the component.

The simplest and most cost effective method is to improve the inherent system cooling

characteristics through careful design and placement of fans, vents, and ducts. When additional

cooling is required, component thermal solutions may be implemented in conjunction with system

thermal solutions. The size of the fan or heatsink can be varied to balance size and space

constraints with acoustic noise.

The goal of this document is to provide an understanding of the operating limits of the

Intel®E7500 chipset MCH and describe a reference thermal solution. Properly designed solutions

provide adequate cooling to maintain the MCH die temperatures within thermal specifications.

This is accomplished by providing a low local-ambient temperature, ensuring adequate local

airflow, and minimizing the die to local-ambient thermal resistance. By maintaining the MCH die

temperature within the range recommended in this document, the system designer can ensure the

proper functionality, performance, and reliability of the chipset.

This document addresses thermal design and specifications for the MCH component only. For

thermal design information on other chipset components, refer to the respective component

datasheet. For the P64H2, refer to the Intel®PCI/PCI-X 64-bit Hub 2 (P64H2) Thermal and

Mechanical Design Guidelines.

Introduction

8Intel®E7500 MCH Thermal and Mechanical Design Guidelines

1.1 Design Flow

To develop a reliable, cost-effective thermal solution, several tools have been provided to the

system designer. Figure 1 illustrates the design process implicit to this document and the tools

appropriate for each step.

Figure 1. Thermal Design Process

Step 1: Thermal Simulation

- Thermal Models

- Thermal Model Users

Guide

Step 2: Heatsink Selection

- Thermal Reference

- Mechanical Reference

Step 3: Thermal Validation

- Thermal Testing Software

- Software Users Guide

Therm_Design_Proc

Introduction

Intel®E7500 MCH Thermal and Mechanical Design Guidelines 9

1.2 Definition of Terms

Term Definition

BGA Ball Grid Array. A package type defined by a resin-fiber substrate, onto which a die is

mounted, bonded and encapsulated in molding compound. The primary electrical

interface is an array of solder balls attached to the substrate opposite the die and

molding compound.

ICH3-S I/O Controller Hub. The chipset component that contains the primary PCI interface, LPC

interface, USB, ATA-33, and other legacy functions.

MBGA Mini Ball Grid Array. A version of the BGA with a smaller ball pitch.

MCH Memory Controller Hub. The chipset component that contains the processor interface

and the memory interface.

FC-BGA Flip Chip Ball Grid Array. A packaging technology used for the MCH.

P64H2 Bus Controller Hub. The chipset component that interfaces the PCI-X buses.

Tcase-nhs The maximum package case temperature without any package thermal solution. This

temperature is measured at the geometric center of the top of the package case.

Tdie-nhs The maximum die temperature without any package thermal solution. This temperature

is measured at the geometric center of the top of the package die.

Tdie-hs The maximum die temperature with the reference thermal solution attached. This

temperature is measured at the geometric center of the top of the package die.

TDP Thermal Design Power. Thermal solutions should be designed to dissipate this target

power level.

Introduction

10 Intel®E7500 MCH Thermal and Mechanical Design Guidelines

1.3 Reference Documents

Document Document

Number

Intel®Xeon™ Processor Thermal Design Guidelines

http://www.intel.com/design/Xeon/guides/298348.htm 298348

Intel®PCI/PCI-X 64-bit Hub 2 (P64H2) Thermal and Mechanical Design Guidelines 298648

Intel®Xeon™ Processor with 512 KB L2 Cache and Intel®E7500 Chipset Platform

Design Guide 298649

Intel®E7500 Chipset Datasheet: E7500 Memory Controller Hub (MCH) 290730

Intel®82801CA I/O Controller Hub 3 (ICH3-S) Datasheet 290733

Intel®82870P2 PCI/PCI-X 64-bit Hub 2 (P64H2) Datasheet 290732

BGA/OLGA Assembly Development Guide Note 1

Thermal Design Suggestions for various form factors

http://www.formfactors.org

NOTES:

1. Contact your Intel Field Sales representative.

Autres manuels pour E7500

Table des matières

Autres manuels Intel Matériel informatique

Intel

Intel 460GX Mode d’emploi

Intel

Intel VC820 - Desktop Board Motherboard Mode d’emploi

Intel

Intel Core i7-980X Instructions d'utilisation et de sécurité

Intel

Intel QX9770 - Core 2 Extreme Quad-Core Processor Mode d’emploi

Intel

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES... Manuel utilisateur

Intel

Intel 946GZ Manuel utilisateur

Intel

Intel CORE 2 DUO E4000 - 3-2008 Manuel utilisateur

Intel

Intel BV80605001914AG - Processor - 1 x Xeon X3430 Manuel utilisateur

Intel

Intel G22856-001 Manuel d'installation

Intel

Intel NetStructure ZT 5515 Manuel du propriétaire

Intel

Intel SRCU32 - RAID Controller Manuel utilisateur

Intel

Intel RS2BL080DE Manuel utilisateur

Intel

Intel UPI- 41A Manuel utilisateur

Intel

Intel P8700 - Core 2 Duo Processor Manuel utilisateur

Intel

Intel SL6NQ - Xeon 2.4 GHz/533MHz/512 KB CPU Processor... Manuel utilisateur

Intel

Intel RS25DB080 Manuel d'installation

Intel

Intel 45NM - Phenom II X4 925 AM3 2.8GHZ 8MB 95W 4000MHZ... Manuel utilisateur

Intel

Intel X3350 - Xeon 2.66 Ghz 12M L2 Cache 1333MHz FSB LGA775 Quad-Core... Manuel utilisateur

Intel

Intel PXA255 Manuel utilisateur

Intel

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 1... Manuel utilisateur

Intel

Intel E2180 - Pentium Dual-Core 2.00GHz 800MHz 1MB Socket 775... Mode d’emploi

Intel

Intel 6 SERIES Manuel utilisateur

Intel

Intel BX80619I73820 Mode d’emploi

Intel

Intel FCPGA2 - Processor - 1 x Pentium 4 2.66 GHz Mode d’emploi

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Jupiter

Jupiter RAM PACK Manuel utilisateur