Intel SBFCM Manuel utilisateur

Intel®Blade Server FC Expansion Card

SBFCM: Installation and User’s Guide

A Guide for Technically Qualified Assemblers of Intel®Identified Subassemblies & Products

Order Number C39675-003

ii Intel Blade Server FC Expansion Card SBFCM: Installation and User’s Guide

iii

When translations of this guide are available, you can find them at the following URL:

http://support.intel.com/support/motherboards/server/12

Disclaimer

Information in this document is provided in connection with Intel. products. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's

Terms and Conditions of Sale for such products.

Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use

of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or

infringement of any patent, copyright or other intellectual property right.

Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining

applications or for any other application in which the failure of the Intel product could create a situation where

personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,

without notice.

Intel, Pentium, Itanium and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in

the United States and other countries.

* Other names and brands may be claimed as the property of others.

iv Intel Blade Server FC Expansion Card SBFCM: Installation and User’s Guide

SBCE safety and regulatory information

✏NOTE

The service procedures are designed to help you isolate problems. They are written with the

assumption that you have model-specific training on all computers, or that you are familiar with the

computers, functions, terminology, and service information provided in this manual.

vi Intel Blade Server FC Expansion Card SBFCM: Installation and User’s Guide

General Safety

Follow these rules to ensure general safety:

• Observe good housekeeping in the area of the machines during and after maintenance.

• When lifting any heavy object:

1. Ensure you can stand safely without slipping.

2. Distribute the weight of the object equally between your feet.

3. Use a slow lifting force. Never move suddenly, or twist, when you attempt to lift.

4. Lift by standing or by pushing up with you leg muscles; this action removes the strain from the

muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35lb) or any

object that you think is too heavy for you.

• Do not perform any action that causes hazards to the customer, or makes the equipment unsafe.

• Before you start the machine, ensure that other service representatives and the customer’s personnel are

not in a hazardous position.

• Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the

machine.

• Keep your tool case away from walk areas so that other people will not trip over it.

• Do not wear loose clothing that can be trapped in the moving parts of a machine. Ensure that your sleeves

are fastened or rolled up above your elbows. If your hair is long, fasten it.

• Insert the ends of your necktie or scarf inside clothing, or fasten it with a nonconductive clip,

approximately 8 centimeters (3 inches) from the end.

• Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing. Remember:

Metal objects are good electrical conductors.

• Wear safety glasses when you are: hammering, drilling soldering, cutting wire, attaching springs, using

solvents, or working in any other conditions that might be hazardous to your eyes.

• After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that

is worn or defective.

• Reinstall all covers correctly before returning the machine to the customer.

Electrical Safety

CAUTION:

Electrical current from power, telephone, and communication cables can be hazardous. To

avoid personal injury or equipment damage, disconnect the server system power cords,

telecommunication systems, networks, and modems before you open the server covers, unless

instructed otherwise in the installation and configuration procedures.

Important:

Observe the following rules when working on electrical equipment.

• Use only approved tools and test equipment. Some hand tools have handles covered with a soft material

that does not protect you when working with live electrical currents.

• Many customers have rubber floor mats (near their equipment) that contain small conductive fibers to

decrease electrostatic discharges. Do not use this type of mat to protect yourself from electrical shock.

• Find the emergency power-off (EPO) switch, disconnect switch, or electrical outlet in the room. If an

electrical accident occurs, you can quickly turn off the switch or unplug the power cord.

• Do not work alone under hazardous conditions, or near equipment that has hazardous voltages.

vii

• Disconnect all power before:

— Performing a mechanical inspection

— Working near power supplies

— Removing or installing main units

• Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer

to power-off the wall box (that supplies power to the machine) and to lock the wall box in the off position.

• If you need to work on a machine that has exposed electrical circuits, observe the following precautions:

— Ensure that another person, familiar with the power-off controls, is near you. Remember: another

person must be there to switch off the power, if necessary.

— Use only one hand when working with powered-on electrical equipment; keep the other hand in your

pocket or behind your back.

— Remember: There must be a complete circuit to cause electrical shock. By observing the above rule,

you may prevent a current from passing through your body.

• When using testers, set controls correctly and use the approved probe leads and accessories for that tester.

• Stand on suitable rubber mats (obtained locally, if necessary) to insulate you from grounds such as metal

floor strips and machine frames.

• Observe the special safety precautions when you work with very high voltages; these instructions are in

the safety sections of the maintenance information. Use extreme care when measuring high voltages.

• Regularly inspect and maintain your electrical hand tools for safe operational condition.

• Do not use worn or broken tools and testers.

• Never assume that power has been disconnected from a circuit. First, check that it has been powered-off.

• Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors,

nongrounded power extension cables, power surges, and missing safety grounds.

• Do not touch live electrical circuits with the reflective surface of a plastic dental inspection mirror. The

surface is conductive; such touching can cause personal injury and machine damage.

• When the power is on and power supply units, blowers and fans are removed from their normal operating

position in a machine, do not attempt to service the units. This practice ensures correct grounding of the

units.

• If an electrical accident occurs, use caution:

— Switch power off

— Send another person to get help/medical aid

Handling electrostatic discharge-sensitive devices

Any computer part containing transistors or integrated circuits (IC) should be considered sensitive to

electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects.

Protect against ESD damage by equalizing the charge so that the server, the part, the work mat, and the person

handling the part are all at the same charge.

✏NOTE

Use product-specific ESD procedures when they exceed the requirements noted here.

Make sure that the ESD-protective devices you use have been certified (ISO 9000) as fully effective.

When handling ESD-sensitive parts:

• Keep the parts in protective packages until they are inserted into the product.

• Avoid contact with other people.

• Wear a grounded wrist strap against your skin to eliminate static on your body.

• Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when

you are wearing a wrist strap.

viii Intel Blade Server FC Expansion Card SBFCM: Installation and User’s Guide

• Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially

useful when handling ESD-sensitive devices.

• Select a grounding system, such as those in the following list, to provide protection that meets the specific

service requirement.

— Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground.

— Use an ESD common ground or reference point when working on a double-insulated or battery-

operated system. You can use coax or connector-outside shells on these systems.

— Use the round ground-prong of the AC plug on AC-operated computers.

✏NOTE

The use of a grounding system is desirable but not required to protect against ESD damage.

DANGER

Electrical current from power, telephone and communication cables is hazardous.

To avoid a shock hazard:

•Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration

of this product during an electrical storm.

•Connect all power cords to a properly wired and grounded electrical outlet.

•Connect to properly wired outlets any equipment that will be attached to this product.

•When possible, use one hand only to connect or disconnect signal cables.

•Never turn on any equipment when there is evidence of fire, water, or structural damage.

•Disconnect the attached power cords, telecommunications systems, networks, and modems

before you open the device covers, unless instructed otherwise in the installation and

configuration procedures.

•Connect and disconnect cables as described in the following table when installing, moving, or

opening covers on this product or attached devices.

To Connect To Disconnect

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

CAUTION:

If your system has a module containing a lithium battery, replace it only with the same or an

equivalent type battery recommended by the manufacturer. If your system has a module

containing a lithium battery, replace it only with the same module type made by the same

manufacturer. The battery contains lithium and can explode if not properly used, handled, or

disposed of.

Do not:

• Throw or immerse into water

• Heat to more than 100×C (212×F)

• Repair or disassemble

Dispose of the battery as required by local ordinances or regulations.

CAUTION:

When laser products (such as CD-ROMs, DVD-ROM drives, fiber optic devices, or

transmitters) are installed, note the following:

•Do not remove the covers. Removing the covers of the laser product could result in exposure to

hazardous laser radiation. There are no serviceable parts inside the device.

•Use of controls or adjustments or performance of procedures other than those specified herein

might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the

following:

Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments,

and avoid direct exposure to the beam.

x Intel Blade Server FC Expansion Card SBFCM: Installation and User’s Guide

≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs)

CAUTION:

Use safe practices when lifting.

CAUTION:

The power control button on the device and the power switch on the power supply do not

turn off the electrical current supplied to the device. The device also might have more than

one power cord. To remove all electrical current from the device, ensure that all power cords

are disconnected from the power source.

CAUTION:

Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices.

Table des matières

Autres manuels Intel Matériel informatique

Intel

Intel RS2SG244 Manuel utilisateur

Intel

Intel BX80571E5300 - Pentium 2.6 GHz Processor Manuel utilisateur

Intel

Intel NetStructure DM/V600-4E1-cPCI Instructions d'utilisation

Intel

Intel E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE... Manuel utilisateur

Intel

Intel 5000 Series Manuel utilisateur

Intel

Intel Compute Stick STK2m3W64CC Manuel utilisateur

Intel

Intel 87C196CA Manuel utilisateur

Intel

Intel I5 3570K Manuel utilisateur

Intel

Intel G23557-002 Manuel utilisateur

Intel

Intel E5345 - Xeon 2.33 GHz 8M L2 Cache 1333MHz FSB LGA771 Active Quad-Core... Manuel utilisateur

Intel

Intel Atom E3900 SoC Series Manuel utilisateur

Intel

Intel PXA255 Manuel utilisateur

Intel

Intel Motherboard Raptor AT Manuel utilisateur

Intel

Intel 925 - Pentium D 925 3.0GHz 800MHz 4MB-Cache Socket 775... Manuel utilisateur

Intel

Intel M50CYP2SB Series Manuel

Intel

Intel 946GZ Manuel utilisateur

Intel

Intel SASMF8I - RAID Controller Manuel d'installation

Intel

Intel 945G - Bulk Single Unit Atx Exp Manuel utilisateur

Intel

Intel I3-530 Manuel de l'opérateur

Intel

Intel i7-800 Manuel utilisateur

Intel

Intel Atom N2800 Manuel utilisateur

Intel

Intel ECM-APL Manuel utilisateur

Intel

Intel RS2WG160 Manuel d'installation

Intel

Intel SASUC8I - RAID Controller Manuel d'installation

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Jupiter

Jupiter RAM PACK Manuel utilisateur