Infineon Traveo II CPU board Manuel utilisateur

www.infineon.com

Please note that Cypress is an Infineon Technologies Company.

The document following this cover page is marked as “Cypress” document as this is the

company that originally developed the product. Please note that Infineon will continue

to oﬀer the product to new and existing customers as part of the Infineon product

The fact that Infineon oﬀers the following product as part of the Infineon product

portfolio.

Continuity of document content

portfolio does not lead to any changes to this document. Future revisions will occur

when appropriate, and any changes will be set out on the document history page.

Continuity of ordering part numbers

Infineon continues to support existing part numbers. Please continue to use the

ordering part numbers listed in the datasheet for ordering.

CYTVII-B-H-4M-176-CPU board quick start guide

Traveo™ II CPU board

Kit contents:

1. Traveo™ II CPU board (CYTVII-B-H-4M-176-CPU)

2. Type-B Mini USB cable

3. 12V AC-DC universal power adapter

4. Quick start guide (this document)

5. Screws and spacers

Traveo™ II CPU board

• Ensure that the MCU reset controller jumper (J18) is

inserted.

CYTVII-B-H-4M-176-CPU board quick start guide

•Ensure that jumpers J7, J6, J5, J11, J9, J41, J42 are

inserted. Ensure that jumpers J8, J45, J10 are in

1-2 position and J46 is in 2-3 position.

•Connect an appropriate programming tool (IAR/GHS) to

one of the debugging interfaces (J21, J20, J22, J19).

• Use an appropriate IDE on a PC to load a rmware SREC le into the device ash. The LED blink rmware is available

in the release package.

•

Connect the 12V adapter to power jack (J1). Toggle the

switch SW1 to the ON position to power up the board.

CYTVII-B-H-4M-176-CPU board quick start guide

• User guide

•Schematic

• Sample driver library (SDL)

• Software examples

Instructions:

Use the board in conjunction with the body controller baseboard (CYTVII-B-E-BB) to evaluate all features of the

Traveo™ II MCU. In standalone mode, only limited features of the MCU are available.

Traveo™ II CPU board

CYTVII-B-E-BB CYTVII-B-H-4M-176-CPU

See the CPU board user guide for details.

Go to the customer support portal (cypress.com/support) to know more about the baseboard and

compatibility, and for the following resources:

CYTVII-B-H-4M-176-CPU board quick start guide

Traveo™ II CPU board

Traveo™ II CPU board details

1. MCU reset controller jumper – J18

2. MCU reset LED – LED6

3. MCU reset button – SW5

4. User LEDs – LED4 & LED5

5. Jumpers for user LEDs – J16 & J17

6. Automotive Ethernet controller (TJA1100) – U6

7. Automotive Ethernet connector – J27

8. Hibernate mode switch – SW3

9. IDC Arm®standard JTAG 20-Pin connector – J21

10. Arm®Cortex®debug MIPI-10 connector – J20

11. Arm®Cortex®debug ETM MIPI-20 connector – J22

12. Arm®ETM Mictor–38 connector – J19

13. User switches – SW2 & SW4

14. Jumpers for user switches – J13 & J15

15. Jumpers for SMIF – R155, R157, R169, R170

16. Jumpers for SDHC – R197 to R202

17. 512Mb HyperFlash™ memory (S26KL512) – U15

18. 64Mb HyperRAM™ DRAM (S27KL064) – U16

19. 256Mb Quad–SPI ash (FL256Sx) – U19, U20

20. SDHC card connector – U14

21. LDO for audio 1.8V (NCP1117) – U10

22. 3.5mm audio jack – J29

23. Audio codec (TLV320AIC26) – U9

24. Mini-B USB connector – J25

25. UART Rx and Tx LEDs – LED8, LED9

26. CPU board power switch – SW1

27. Power connector – J1

28. USB serial controller (CY7C65213) – U5

29. UART Rx and Tx jumpers – J24, J26

30. PMIC controller board – ET1, ET2

31. Traveo™ II TVII–B–H–4M device (CYT4BB) – U3

32. MCU power jumpers – J5 to J11, J45

33. MCU power LEDs – LED1, LED2, LED3

11 12 13 14 171615 18 19

282930313233

herein are the property of their respective owners. 002-30059 Rev.*A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Infineon Matériel informatique

Infineon

Infineon Cypress S6SATU01A Series Manuel utilisateur

Infineon

Infineon CDM10V Manuel utilisateur

Infineon

Infineon EVAL-XMC4800PSOC6M5 Manuel utilisateur

Infineon

Infineon BTN9970 Manuel utilisateur

Infineon

Infineon CY7113 EZ-PD PMG1-S3 Manuel utilisateur

Infineon

Infineon CY8CKIT-005 Manuel utilisateur

Infineon

Infineon 6EDL SPI LINK Manuel utilisateur

Infineon

Infineon KIT T2G-B-E LITE Manuel utilisateur

Infineon

Infineon DEMO-MIPI-4K-CAM01 Manuel utilisateur

Infineon

Infineon Cypress CY8CKIT-064B0S2-4343W Manuel utilisateur

Infineon

Infineon Traveo II CPU board Manuel utilisateur

Infineon

Infineon AIROC CYW20721 Manuel utilisateur

Infineon

Infineon BTN9960 Manuel utilisateur

Infineon

Infineon BTS3011TE Manuel utilisateur

Infineon

Infineon CYSBSYS-RP01 Manuel utilisateur

Infineon

Infineon TLE4972 Manuel utilisateur

Infineon

Infineon XMC7200 Manuel utilisateur

Infineon

Infineon EZ-PD PAG2S-2P Manuel utilisateur

Infineon

Infineon DSO-8 Manuel utilisateur

Infineon

Infineon TRAVEO II Manuel utilisateur

Infineon

Infineon BTN9970 Manuel utilisateur

Infineon

Infineon REF-Vacuum-C101-2ED Manuel utilisateur

Infineon

Infineon ICL8001G Mode d’emploi

Infineon

Infineon CY8CKIT-028-SENSE Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur