HP StorageWorks MSL6000 series Manuel utilisateur

Drive 1 Drive 0

Drive 3

Drive 1

Drive 0

Drive 2

StorageWorks

MSL6000

Series

Drive Module

Installation

Caution: Parts can be damaged by

electrostatic discharge. Keep parts in their

containers until needed. Ensure you are

properly grounded when touching static-

sensitive components.

Unload any tape cartridges in the drive to be

removed using your application software or the

library GUI touch screen.

Note: If you are adding an additional

tape drive to your library, skip to

“Installation” in step 7.

Note: This part is not hot-pluggable. It is

necessary to power down the library to

replace this part.

Note: Depending on the model, your

library may look different from the ones

illustrated in this procedure.

Inspect the contents of the kit.

removal

Decimal Keypad

Drive 1

Source:

Destination: Slot 2

Touch an Input Box to Edit

Mail

Slot

Execute

Move Back

Drive

Slot

Clear

entry

Back

space

Element Type

StorageWorks

MSL series

drive module

installation

Caution: Parts can be damaged by

electrostatic discharge. Keep parts in their

containers until needed. Ensure you are

properly grounded when touching static-

sensitive components.

Unload any tape cartridges in the drive to be

removed using your application software or the

library GUI touch screen.

Note: This part is hot-pluggable. It is not

necessary to power down the library to

replace this part.

Note: Depending on the model, your

library may look different from the ones

illustrated in this procedure.

Note: If you are adding an additional

tape drive to your library, skip to

“Installation” in step 7.

Inspect the contents of the kit.

removal

Drive 1

Drive 0

Drive 3

Drive 2

Drive 0

DecimalKeypad

Drive 1

Source:

Destination:

Slot 2

Touchan Input Box to Edit

Mail

Slot

Execute

Move Back

Drive

Slot

Clear

entry

Back

space

ElementType

StorageWorks

MSLseries

drivemodule

installation

Caution:Partscanbedamagedby

electrostaticdischarge.Keeppartsintheir

containersuntilneeded.Ensureyouare

properlygroundedwhentouchingstatic-

sensitivecomponents.

Unloadanytapecartridgesinthedrivetobe

removedusingyourapplicationsoftwareorthe

libraryGUItouchscreen.

Note:Thispartishot-pluggable.Itisnot

necessarytopowerdownthelibraryto

replacethispart.

Note:Dependingonthemodel,your

librarymaylookdifferentfromtheones

illustratedinthisprocedure.

Note:Ifyouareaddinganadditional

tapedrivetoyourlibrary,skipto

“Installation”instep7.

Inspectthecontentsofthekit.

removal

Drive1

Drive0

Drive3

Drive2

Drive0

DecimalKeypad

Drive1

Source:

Destination:

Slot2

TouchanInputBoxtoEdit

Mail

Slot

Execute

MoveBack

Drive

Slot

Clear

entry

Back

space

ElementType

Make sure that the LED on the tape drive to be

removed is off.

Using a flat-blade screwdriver, loosen the two

captive thumbscrews at the top center and lower

left of the tape drive.

Pull straight back on the tape drive handle to

remove it from the library.

Note: Some effort is required to overcome

the initial resistance of unplugging the tape

drive from the receiver.

If you are upgrading to a new drive technology,

use HP StorageWorks Library and Tape Tools to

upgrade the library firmware before installing

the new tape drive.

Before installing the new drive, inspect the

connectors on the tape drive. Ensure that the

connectors are intact, free of any foreign objects,

and have no cracks or deformed contacts.

installation 8

Deactivate the

tape drive to

be removed by

selecting Menu >

Maintenance >

Replace Drive >

Deactivate Drive

The screen will

change to indicate

that Drive ncan

now be removed.

910

Using a flat-blade screwdriver, tighten the two

captive thumbscrews. If adding an additional drive,

configure the library for the new tape drive. Refer

to the tape library user guide for more information.

Activate the tape

drive by selecting

Activate Drive

Back > Back >

Back to the main

screen. The screen

will change to

indicate that drive

n is now activated.

Slowly insert the new tape drive into the mounting

bay, aligning the connectors on the tape drive

with the connectors on the library.

Caution: Push on the tape drive handle

and the bottom portion of the tape drive

until it is seated.

If you are

adding an

additional tape

drive to your

library, or if you

are upgrading an existing drive, ensure you

use supported cabling configurations. See the

HP StorageWorks MSL6000 Series Tape Library

User Guide for more information. The user

guide can be downloaded from

http://www.hp.com/support.

Use HP StorageWorks Library and Tape Tools,

Remote Management Interface (RMI), or MSLUtil

diagnostic software to upgrade the drive to the

latest firmware.

Note: You may need to reconfigure your

software application. Drive serial numbers

might be used for configuration and to

assign drives to the library.

- Terminator

- 0.5 m cable

to host

- RS-232 diagnostic

cable (for service

only)

Two-Drive Library Four-Drive Library

Note: For optimum

performance, Ultrium

460 and 960 drives

should be configured

with one drive per bus.

Second Edition (March 2005)

Part Number: 331764-002

*331764-002*

331764-002

Getting Help

• HP Product Information Site:

http://www.hp.com/go/storage

• HP Technical Support and Phone Numbers:

http://www.hp.com/support

• HP StorageWorks Library and Tape Tools

(L&TT) diagnostic software:

http://www.hp.com/support/tapetools

Note: Use L&TT, RMI, or MSLUtil

diagnostic software to verify installations

and to ensure your library has the latest

firmware.

Autres manuels pour StorageWorks MSL6000 series

Autres manuels HP Unité de contrôle

HP 572018-B21 Manuel utilisateur

HP 6600-A FIP-600 FlexIntfPltfrm Rtr Mod Instructions de montage

HP HP 81553SM Manuel utilisateur

HP E Series Manuel utilisateur

HP ProCurve PCM+ Agent on ONE zl Module Instructions de montage

HP 16600A Series Manuel utilisateur

HP 3484A Manuel de service

HP HP E1361A Manuel utilisateur

HP 7500 48p 1000BASE-T w/PoE+ SE Mod Instructions d'installation

HP Synergy 480 Gen9 Manuel

HP HPE FlexNetwork 7500 Manuel utilisateur

HP HP 81554SM Manuel du propriétaire

HP Synergy 480 Gen9 Manuel utilisateur

HP 16520a Manuel utilisateur

HP R6000 - UPS - Lead Acid Expandable Manuel utilisateur

HP E1364A Manuel utilisateur

HP E1361A 4X4 Manuel utilisateur

HP 13255 Manuel

HP 81541MM Manuel du propriétaire

HP VXI E1476A Mode d'emploi

HP HP 81531A Manuel utilisateur

HP 83400 Series Manuel utilisateur

HP E3456A Manuel utilisateur

HP 13255 Manuel

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur