HP ProCurve PCM+ Agent on ONE zl Module Instructions de montage

EL-MF877-00 Page 1

Template Revision A

Product End-of-Life Disassembly Instructions

Product Category:

Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

HP ProCurve PCM+ Agent on ONE zl Module (J9496A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0

Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm 1

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height 0

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

EL-MF877-00 Page 2

Template Revision A

Components, parts and materials containing

radioactive substances 0

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Torx Screw Drivers T-6, T-8, T-

10, Box type

Phillips

Screw Driver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Using the Phillips screw driver, removes the 4 Phillips screw attaching the hard drive to the PCA.

2. Remove the 4 screws that attached the brackets to the hard drive using a T-8 screwdriver.

3. Remove the solder-anchor heatsink (towards right of PCA when looking from front) by releasing the catch from the 2

anchors.

4. Remove the 5 screws that attached the Com-E module onto the PCA using the Boxtype Torx screwdriver. Refer to

pic.1

5. Remove another 1 screw,using the Boxtype Torx screwdriver, as shown in Pic 2 to completely remove the Com-E

module from the PCA.

6. Remove the 4 screws that attached the heatsink onto the PCA using the T-10 Torx screwdriver. Refer to pic. 3

7. Remove the guide pin by using a T-10 Torx screwdriver to remove the 1 screw that attached the guide pin to the PCA.

8. Remove the bulkhead by removing the 5 screws securing the bulkhead onto the PCA. Remove 3 screws using the T-6

screwdriver and another 2 screws (towards right of PCA, when looking from front) using the T-10 screwdriver.

9. Remove two screws and springs on the bulkhead

10. Remove the insert label in the front pocket of the bulkhead

11. Remove the CF card on the PCA.

12.

13.

14.

15.

16.

17.

18.

19.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 3

Template Revision A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Unité de contrôle

HP HP 70909A Manuel utilisateur

HP StorageWorks MSL6000 series Manuel utilisateur

HP E Series Manuel utilisateur

HP ProCurve Wireless 170wl Manuel utilisateur

HP Synergy 480 Gen9 Manuel

HP 7500 48p 1000BASE-T w/PoE+ SE Mod Instructions d'installation

HP HP 83491A Manuel utilisateur

HP Synergy 480 Gen9 Manuel utilisateur

HP HP 85091A Manuel utilisateur

HP Synergy 480 Gen10 Manuel utilisateur

HP HP 81554SM Manuel du propriétaire

HP E1419A Manuel utilisateur

HP 83400 Series Manuel utilisateur

HP 16600A Series Manuel utilisateur

HP HP 81552SM Manuel utilisateur

HP HP 81536A Manuel utilisateur

HP JC075A Instructions de montage

HP E1328A Manuel utilisateur

HP 3497A Manuel d'installation

HP VXI E1476A Mode d'emploi

HP HPE FM 2072 Manuel utilisateur

HP HP 81551MM Manuel utilisateur

HP SDGOB-1391 Manuel utilisateur

HP 572018-B21 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur