HP Sangoma 2 Instructions d'installation

EL-MF877-00 Page 1

Template Revision A

Product End-of-Life Disassembly Instructions

Product Category:

Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

Sangoma 2 Port FXO2 Port FXS Voice Card / J9518A

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0

Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm 5

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height 0

External electrical cables and cords 2

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers

EL-MF877-00 Page 2

Template Revision A

Components, parts and materials containing

radioactive substances 0

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Slotted Screw Driver

Phillips Screw Driver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove the 12V power cable. Refer to Pic.1

2. Remove the fax sync cable. Refer to Pic 2

3. Snap off the 2 rivets attaching the insulator pad. Using slotted screw driver, remove the nylon screw attaching the

insulator pad to the PCA. Refer to Pic.3

4. Remove the insulator pad

5. Using the slotted screw driver, remove the 3 stand-offs that connects the 2 main PCAs

6. Remove the low profile bracket by removing the 2 screws securing the bracket onto the PCA. Remove the screws

using Phillips screw driver.

7. Remove the 2 small PCAs (1 green and 1 red) from 1 of the main PCA

8. Using Phillips screw driver, unscrew the 2 screws which attached the smallest PCA to the PCA which does not has

any RJ ports.

10.

11.

12.

13.

14.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Pic Illustration

EL-MF877-00 Page 3

Template Revision A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Matériel informatique

HP Z Turbo Drive Quad Pro Manuel utilisateur

HP D7171A - NetServer - LPr Manuel utilisateur

HP E3473A Manuel utilisateur

HP OmniBook 3100 Manuel utilisateur

HP MPEGscope Portable Guide de l'utilisateur

HP A3550A - High Availability Disk Arrays Model 20 Storage... Manuel utilisateur

HP Xw8400 - Workstation - 4 GB RAM Manuel utilisateur

HP Integrity rx8620 Manuel utilisateur

HP JG560A Manuel utilisateur

HP FlexFabric 12908E LSXM108XFAN Manuel utilisateur

HP E5000 Manuel utilisateur

HP Integrity rx1600 Manuel utilisateur

HP ProLiant DL140 Manuel utilisateur

HP NC364T Manuel utilisateur

HP 6-Port SATA RAID Manuel utilisateur

HP Smart Array B140i Manuel utilisateur

HP 64751 Manuel utilisateur

HP UNDP-1H Manuel utilisateur

HP Smart Array P400 Instructions d'utilisation

HP MCS G2 Guide d'installation

HP Z210 Series Manuel utilisateur

HP Adaptec ultra p2280a Manuel utilisateur

HP D7171A - NetServer - LPr Manuel utilisateur

HP 82718A Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur