HP E2416B Manuel utilisateur

User’s Guide

Publication Number E2416-97002

June 1998

For Safety Information, Warranties, and Regulatory Information, see the

pages at the end of this manual.

Copyright Hewlett-Packard Company 1993 - 1998

HP E2416B Analysis Probe for

Intel 80196

The HP E2416B Analysis Probe — At a Glance

The HP E2416B Analysis Probe provides a complete interface for

state or timing analysis between any compatible 80196 PLCC target

system and HP logic analyzers. The supported logic analyzers are

listed in chapters 1. A microprocessor is defined as compatible if it

conforms to the 80196 architecture, uses the 80196 instruction set,

and uses the 68-pin PLCC pinout. This includes 8096, 8097, AH

versions, -90 versions, BH versions, and 80C196KA/KB/KC/KD.

The analysis probe provides the physical connection between the

target microprocessor and the logic analyzer. The configuration

software on the enclosed disks set up the logic analyzer for

compatibility with the analysis probe. The inverse assemblers on the

disks let you obtain displays of the 80196 data in 80196 assembly

language mnemonics.

If you are using the analysis probe with the HP 16600 or HP 16700

series logic analysis systems, you only need this manual as a

reference. The HP 16600 and 16700 series contain a Setup Assistant,

which guides you through the connection and configuration process

using on screen dialog windows. For an overview of Setup Assistant,

refer to Chapter 1, "Setup Assistant."

For more information on the logic analyzers or microprocessor, refer

to the appropriate reference manuals for those products.

ii HP E2416B 80196 Analysis Probe

Analyzing a Target System with the HP E2416B Analysis Probe

The HP E2416B AnalysisProbe — Ata Glance

HP E2416B 80196 Analysis Probe iii

In This Book

This book is the User’s Guide for the HP E2416B Analysis Probes. It assumes

that you have a working knowledge of the logic analyzer used and the

microprocessor being analyzed.

This user’s guide is organized into the following chapters:

Chapter 1 contains overview information, including a list of required

equipment.

Chapter 2 explains how to connect the logic analyzer to your target

system through the analysis probe, and how to configure the analysis

probe and logic analyzer to interpret target system activity. The last

section in this chapter shows you how to hook up optional equipment

to obtain additional functionality.

HP 16600 and HP 16700 Series Logic Analysis Systems

If you are using the analysisprobe with HP16600or HP 16700 serieslogic

analysissystems, youonly need this manual as areference for obtaining and

interpretingdata. The HP 16600 and HP 16700 contain a Setup Assistant, which

guides youthroughthe connection and configuration processusing on screen

dialog windows. For an overview of Setup Assistant, refer to chapter 1, "Setup

Assistant."

Chapter 3 provides information on analyzing the supported

microprocessors.

Chapter 4 contains reference information on the analysis probe.

Chapter 5 contains troubleshooting information.

Configuring

Connecting &

Configuring

Your System

Chapter 2

Connecting

the Analysis

Probe to the

Target System

Analyzing the

Target System

Chapter 3

Connecting

Optional

Equipment

Overview

Chapter 1

Reference

Chapter 4

If You Have

a Problem

Chapter 5

Connecting

the Analysis

Probe to the

Logic Analyzer

iv HP E2416B 80196 Analysis Probe

Contents

The HP E2416B Analysis Probe — At a Glance ii

1 Overview

Setup Assistant 1–3

Logic Analyzers Supported 1–4

Logic analyzer software version requirements 1–5

Equipment Used with the Analysis Probe 1–6

Equipment supplied 1–6

Minimum equipment required 1–8

Additional equipment supported 1–8

2 Connecting and Configuring Your System

Power-on/Power-off Sequence 2–4

To power on HP 16600 and HP 16700 series logic analysis systems 2–4

To power on all other logic analyzers 2–4

To power off 2–4

Connecting the Analysis Probe to the Target System 2–5

To connect to a PLCC target system 2–6

Connecting the Analysis Probe to the Logic Analyzer 2–8

Analysis probe pod locations 2–9

To connect to the HP 16600A logic analysis system 2–10

To connect to the HP 16601A logic analysis system 2–11

To connect to the HP 16602A logic analysis system 2–12

To connect to the HP 16603A logic analysis system 2–13

To connect to the HP 16550A logic analyzer 2–14

To connect to the HP 16554/55/56 logic analyzers 2–15

To connect to the HP 1660A/AS/C/CS/CP logic analyzers 2–16

To connect to the HP 1661A/AS/C/CS/CP logic analyzers 2–17

Contents-1

To connect to the HP 1662A/AS/C/CS/CP logic analyzers 2–18

To connect to the HP 1670A/D logic analyzer 2–19

To connect to the HP 1671A/D logic analyzer 2–20

To connect to the HP 1672A/D logic analyzer 2–21

Configuring 2–22

Configuring the Analysis Probe 2–23

Configuring the Logic Analysis System 2–24

To load configuration and inverse assembler files — HP 16600/700 logic analy-

sis systems 2–25

To load configuration and inverse assembler files — other logic analyzers 2–

Connecting Optional Equipment 2–28

3 Analyzing the Target System

Analyzing the Target System 3–2

Modes of Operation 3–3

State-per-transfer mode 3–3

State-per-clock mode 3–3

Timing mode 3–3

Logic Analyzer Configuration 3–4

Trigger specification 3–4

Format specification display 3–4

Logic Analyzer Symbols 3–6

Modifying the trigger menu 3–8

Contents

Contents-2

Using the Inverse Assemblers 3–9

To display captured state data 3–10

To align the inverse assembler 3–11

Inverse assembler output format 3–12

Inverse assembler error messages 3–12

4 Reference

Operating characteristics of the analysis probe 4–3

Theory of operation and clocking 4–5

State-per-transfer mode 4–5

State-per-clock mode 4–5

Timing mode 4–6

Signal-to-connector mapping 4–8

Circuit board dimensions 4–13

Replaceable parts 4–14

5 If You Have a Problem

Analyzer Problems 5–3

Intermittent data errors 5–3

Unwanted triggers 5–3

No activity on activity indicators 5–4

No trace list display 5–4

Analyzer won’t power up 5–4

Analysis Probe Problems 5–5

Target system will not boot up 5–5

Erratic trace measurements 5–6

Capacitive loading 5–6

Inverse Assembler Problems 5–7

No inverse assembly or incorrect inverse assembly 5–7

Inverse assembler will not load or run 5–8

Intermodule Measurement Problems 5–9

Contents

Contents-3

An event wasn’t captured by one of the modules 5–9

Analyzer Messages 5–10

“. . . Enhanced Inverse Assembler Not Found” 5–10

“. . . Inverse Assembler Not Found” 5–10

“. . . Does Not Appear to be an Inverse Assembler File” 5–10

“Measurement Initialization Error” 5–11

“No Configuration File Loaded” 5–14

“Selected File is Incompatible” 5–14

“Slow or Missing Clock” 5–14

“Time from Arm Greater Than 41.93 ms” 5–15

“Waiting for Trigger” 5–15

Cleaning the Instrument 5–16

Glossary

Index

Contents

Contents-4

Overview

This chapter describes:

•Setup Assistant

•Logic analyzers supported

•Logic analyzer software version requirements

•Equipment used with the analysis probe

•Equipment supplied

•Minimum equipment required

•Additional equipment supported

Configuring

Connecting &

Configuring

Your System

Chapter 2

Connecting

the Analysis

Probe to the

Target System

Analyzing the

Target System

Chapter 3

Connecting

Optional

Equipment

Overview

Chapter 1

Reference

Chapter 4

If You Have

a Problem

Chapter 5

Connecting

the Analysis

Probe to the

Logic Analyzer

1-2 HP E2416B 80196 Analysis Probe

Table des matières

Autres manuels HP Matériel informatique

HP E5000 Manuel utilisateur

HP A4800A Mode d’emploi

HP M8201R Manuel utilisateur

HP 3000 Series Manuel

HP 98625A Manuel utilisateur

HP P Class 450/500/550/600/650/700/750 Manuel

HP 624189-B21 Manuel utilisateur

HP Xw4400 - Workstation - 2 GB RAM Manuel utilisateur

HP NVIDIA Tesla M2070Q Manuel utilisateur

HP Wireless USB Network Adapter hn215w Manuel utilisateur

HP HPE SimpliVity 325 Manuel utilisateur

HP Xw4600 - Workstation - 2 GB RAM Manuel utilisateur

HP P Class 450/500/550/600/650/700/750 Manuel

HP 10512 Instructions d'installation

HP Vectra VE4 Manuel utilisateur

HP QUERY Manuel utilisateur

HP 64751 Manuel utilisateur

HP 5998-1600 Manuel utilisateur

HP A1250 Series Instructions de montage

HP RDX USB 3.0 Mode d’emploi

HP D7171A - NetServer - LPr Manuel utilisateur

HP Compaq t5500 Manuel utilisateur

HP MCS-200 Manuel utilisateur

HP HP27110B Manuel d'installation et d'exploitation

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur