Hirschmann OCTOPUS OS20 Manuel utilisateur

Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014

Technical support

https://hirschmann-support.belden.eu.com

User Manual

Installation

Unmanaged IP54 Switch

OCTOPUS OS20/OS24 Unmanaged

OS20–001000T5T5TAFUHB OS20–001000T5T5TNEUHB

OS24–081000T5T5TNEUHBOS24–081000T5T5TFFUHB

Power

N.C.

P-

P2+

Pin Function

P1+

Power

510

P1 P2

x y

OCTOPUS

OS20

Unmanaged

ETHERNET Switch

Power

N.C.

P-

4N.C.

Pin Function

P+

Power

x y

OCTOPUS

OS20

Unmanaged

ETHERNET Switch

OS20-001000T5T5TNEUHB

Power

N.C.

5P2+

Pin Function

P1+

Power

P-

PoE

P2 FAULT

x y

OCTOPUS

OS24

Unmanaged

ETHERNET Switch

OS24-081000T5T5TFFUHB

Port 2-5, 7-10

Power

N.C.

P-

4N.C.

Pin Function

P+

Power

PoE

FAULT

x y

OCTOPUS

OS24

Unmanaged

ETHERNET Switch

Port 2-5, 7-10

OS20-001000T5T5TAFUHB

OS24-081000T5T5TNEUHB

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

OCTOPUS OS20/OS24 Unmanaged 039 771 001-07-0714 2.7.14

Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014 3

Contents

Safety instructions 5

About this Manual 10

Legend 10

1 Device description 11

1.1 General device description 11

1.2 Description of the device variants 12

1.3 Device view 15

1.4 Power supply 19

1.4.1 Operating voltage type A 19

1.4.2 Operating voltage type F 19

1.4.3 Operating voltage type N 19

1.5 Interfaces 19

1.5.1 10/100 Mbit/s twisted pair connection

(4-pin M12 connector) 19

1.5.2 10/100 Mbit/s twisted pair connection for PoE

(4-pin M12 sockets) 20

1.6 Display elements 21

2 Device installation 22

2.1 Unpacking and checking 22

2.2 Connecting the connector for the

supply voltage 22

2.2.1 Devices with operating voltage type A 23

2.2.2 Devices with operating voltage type F 24

2.2.3 Devices with operating voltage type N 25

2.3 Installing the device and grounding 26

2.3.1 Installing the device 26

2.3.2 Grounding the device 27

2.4 Connecting the ferrite

(only devices with operating voltage type F) 28

4Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014

2.5 Connecting the supply voltage, starting up 29

2.6 Connecting the data lines 29

3 Maintenance and service 30

4 Technical data 31

A Further Support 39

Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014 5

Safety instructions

Certified usage

The device may only be employed for the purposes described in the

catalog and technical description, and only in conjunction with external

devices and components recommended or

approved by the manufacturer. The product can only be operated cor-

rectly and safely if it is transported, stored, installed and assembled pro-

perly and correctly. Furthermore, it must be operated and serviced

carefully.

Supply voltage

The supply voltage is electrically isolated from the housing.

Use undamaged parts.

Relevant for North America:

Only use copper wire/conductors of class 1, 75 °C.

Applies to devices with operating voltage type F:

Exclusively connect SELV circuits with the voltage restrictions in

accordance with IEC/EN 60950-1 to the supply voltage connections.

Applies to devices with operating voltage type A:

Ensure that the externally power unit connected upstream fulfills one

of following conditions:

NEC Class 2

Limited Power Source based on EN 60950-1

Relevant for North America: To be used in Class 2 circuits.

Shielding ground

Note: The shielding ground of the connectable twisted pair lines is

connected to the housing as a conductor.

Beware of possible short circuits when connecting a cable section with

conductive shielding braiding.

Certification type

(Product code position 18, see

table 3 on page 12)

Operational environment

E In the inside of buildings

In the inside of trains

F In the inside of buildings

In the inside of trains

In the inside of ships

In the inside of vehicles

Table 1: Operational environment

6Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014

Housing

Only technicians authorized by the manufacturer are permitted to open

the housing.

The device is grounded via the separate ground screw.

Make sure that the electrical installation meets local or nationally

applicable safety regulations.

Environment

The device may only be operated at the specified surrounding air

temperature (temperature of the surrounding air at a distance of up to

5 cm (1.97 in) from the device) and relative air humidity specified in the

technical data.

Install the device in a location where the climatic threshold values

specified in the technical data are adhered to. Make sure the

environment does not heat the device.

Use the device only in an environment within the pollution degree

specified in the technical data.

Qualification requirements for personnel

Qualified personnel as understood in this manual and the warning signs,

are persons who are familiar with the setup, assembly, startup, and

operation of this product and are appropriately qualified for their job. This

includes, for example, those persons who have been:

trained or directed or authorized to switch on and off, to ground and to

label power circuits and devices or systems in accordance with current

safety engineering standards;

trained or directed in the care and use of appropriate safety equipment

in accordance with the current standards of safety engineering;

trained in providing first aid.

General safety instructions

Please note that products recommended as accessories may have

characteristics that do not fully correspond to those of the corresponding

product. This may limit their possible usage in the overall system.

WARNING

RISK OF BURNING

The surfaces of the device housing may become hot. Avoid touching the

device while it is operating. Wait until the device has cooled down.

Failure to follow these instructions can result in death, serious injury,

or equipment damage.

Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014 7

This device is operated by electricity. You must follow precisely the

prescribed safety requirements for the voltage connections in this

document.

See “Supply voltage” on page 5.

Non-observance of these safety instructions can therefore cause material

damage and/or injuries.

Only appropriately qualified personnel should work on this device or in

its vicinity. Qualified personnel must be thoroughly familiar with the

warnings and maintenance procedures in accordance with this

operating manual.

The proper and safe operation of this device depends on proper

handling during transport, proper storage and assembly, and

conscientious operation and maintenance procedures.

Never start operating the device with damaged components.

Only use the devices in accordance with this manual. In particular,

observe the warnings and safety-related information.

Any work that may be required on the electrical installation may only

be carried out by personnel trained for this purpose.

National and international safety regulations

Make sure that the electrical installation meets local or nationally

applicable safety regulations.

For usage under UL 60950-1 conditions

Note: The following information applies only to device variants with

UL 60950-1 approval and protective earth.

Protective Earth (PE) crimp connection:

The wire diameter for protective earth is at least 1 mm2(AWG 16). Use a

professional crimping tool specified for the wire size. Follow the

instruction of the crimping tool. The pull out force the crimped connection

is at least 135 N according to IEC 60352-2.

E marking

The labeled devices comply with the regulations contained in the following

European directive(s):

Rule No. 10 of the Economic Commission for Europe (ECE): Devices with

a certification are labelled with the E type-approval mark.

(Relevant for devices with certification type F)

CE marking

The labeled devices comply with the regulations contained in the following

European directive(s):

8Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014

2011/65/EU (RoHS)

Directive of the European Parliament and of the Council on the restriction

of the use of certain hazardous substances in electrical and electronic

equipment.

2006/95/EC

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electrical equipment to be

used within specific voltage ranges.

2004/108/EC (EMC)

Directive of the European Parliament and the council for standardizing the

regulations of member states with regard to electromagnetic

compatibility.

In accordance with the above-named EU directive(s), the EU conformity

declaration will be at the disposal of the relevant authorities at the

following address:

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

The product can be used in the industrial sector.

Interference immunity: EN 61000-6-2:2005

Emitted interference: EN 55022:2010

Warning! This is a class A device. This device can cause interference in

living areas, and in this case the operator may be required to take

appropriate measures.

Note: The assembly guidelines provided in these instructions must be

strictly adhered to in order to observe the EMC threshold values.

FCC note

This device complies with part 15 of the FCC rules. Operation is subject

to the following two conditions : (1) This device may not cause harmful

interference; (2) this device must accept any interference received,

including interference that may cause undesired operation.

Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014 9

Appropriate testing has established that this device fulfills the

requirements of a class A digital device in line with part 15 of the FCC

regulations.

These requirements are designed to provide sufficient protection against

interference when the device is being used in a business environment.

The device creates and uses high frequencies and can also radiate high

frequencies, and if it is not installed and used in accordance with this

operating manual, it can cause radio transmission interference. The use

of this device in a living area can also cause interference, and in this case

the user is obliged to cover the costs of removing the interference.

Recycling note

After usage, this product must be disposed of properly as electronic

waste, in accordance with the current disposal regulations of your county,

state and country.

10 Installation OCTOPUS OS20/OS24 Unmanaged

Release

07/2014

About this Manual

The “Installation” user manual contains a device description, safety

instructions, a description of the display, and the other information that you

need to install the device.

Legend

The symbols used in this manual have the following meanings:

Listing

Work step

Subheading

Autres manuels pour OCTOPUS OS20

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hirschmann Changer

Hirschmann

Hirschmann Power MICE Manuel utilisateur

Hirschmann

Hirschmann MACH4000 Series Manuel utilisateur

Hirschmann

Hirschmann BXS Manuel utilisateur

Hirschmann

Hirschmann GRS103 Series Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS 8M-8PoE Manuel utilisateur

Hirschmann

Hirschmann ETHERNET IP67 Instructions d'utilisation et d'installation

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS 8M Series Manuel utilisateur

Hirschmann

Hirschmann RSPE30 Manuel utilisateur

Hirschmann

Hirschmann Octopus II Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS 8M Series Manuel utilisateur

Hirschmann

Hirschmann RS2-4R Manuel

Hirschmann

Hirschmann RSP 20 Manuel utilisateur

Hirschmann

Hirschmann PowerLION-24TP Manuel utilisateur

Hirschmann

Hirschmann RH1-TP Manuel

Hirschmann

Hirschmann PowerMICE MS4128 Manuel utilisateur

Hirschmann

Hirschmann BATOne Manuel utilisateur

Hirschmann

Hirschmann 943 686-003 Manuel utilisateur

Hirschmann

Hirschmann MSP30 Manuel utilisateur

Hirschmann

Hirschmann RSPE 30 Manuel utilisateur

Hirschmann

Hirschmann BRS20-0400 Series Manuel utilisateur

Hirschmann

Hirschmann RSP 25 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur