Heltun HE-HLS01 Manuel utilisateur

HE-HLS01 USER MANUAL 1

HIGH LOAD SWITCH

HE-HLS01 USER MANUAL

for Hardware v.84 & Firmware v.1.5

 
 
HE-HLS01 USER MANUAL 2 
 
 
MANUAL REVISION HISTORY………………………………………………………………3 
OVERVIEW ..................................................................................................................4 
TECHNICAL SPECIFICATIONS...................................................................................5 
FUNCTIONS & FEATURES..........................................................................................5 
INSTALLATION ............................................................................................................6 
DISASSEMBLY.............................................................................................................8 
FACTORY RESET........................................................................................................8 
Z-WAVE NETWORK.....................................................................................................8 
Adding to Z-Wave network .......................................................................................9 
Removing from Z-Wave network ............................................................................10 
Security..................................................................................................................10 
SmartStart.............................................................................................................. 10 
Firmware OTA Update............................................................................................11 
Z-WAVE PLUS V2 SPECIFICATIONS........................................................................12 
ASSOCIATIONS.........................................................................................................14 
SETTINGS (available through Z-Wave network).........................................................15 
DEVICE TYPE “BINARY SWITCH”.............................................................................15 
Parameters List & Factory Defaults ........................................................................ 15 
Z-Wave Frequency................................................................................................. 18 
Hardware & Software Versions............................................................................... 19 
Power and Energy Consumption............................................................................ 19 
Input & Outputs ...................................................................................................... 20 
Temperature Configurations................................................................................... 20 
Time Configurations ............................................................................................... 20 
Auto On/Off function............................................................................................... 21 
External Input Configuration ................................................................................... 22 
Scenarios ...............................................................................................................23 
Energy and Sensor Report Interval......................................................................... 24 
Protections and Notifications ..................................................................................25 
DEVICE TYPE “THERMOSTAT”.................................................................................27 
Parameters List & Factory Defaults ........................................................................ 28 
Z-Wave Frequency................................................................................................. 32 
Hardware & Software Versions............................................................................... 33 
Power and Energy Consumption............................................................................ 33 
Input & Outputs ...................................................................................................... 34 
Temperature Configurations................................................................................... 34 
Time Configurations ............................................................................................... 35 
Time Mode Schedule.............................................................................................. 35 
Energy and Sensor Report Interval......................................................................... 36 
Protections and Notifications ..................................................................................37 
Basic Set Command...............................................................................................39 
LIMITED WARRANTY ................................................................................................40 
 

HE-HLS01 USER MANUAL 3

MANUAL REVISION HISTORY

October 2021

•Firmware V1.5 - Added “Parameter 66 –Retore Relay State”

•Firmware V1.5 –Changed the default values for overvoltage and voltage drop

protections

•Firmware V1.3 - Added “Parameter 46 –Hold Mode Duration for External Input S1”

•Firmware V1.3 - Max supported Nodes for each Association Group increased to 5

•Firmware V1.2 - Added “Parameter 159 –Load On Notification”

•Firmware V1.2 - Added “Parameter 160 –Load Off Notification”

Detailed Changelog & OTA update files can be found at support.heltun.com

HE-HLS01 USER MANUAL 4

OVERVIEW

The HELTUN HE-HLS01 High Load Switch with Thermostat Functions brings incredible

capabilities to any connected device: saving energy, wireless control of connected devices,

and absolute comfort and convenience for your home. It fits easily behind outlets or switches

in standard electrical junction boxes or in a circuit breaker panel connected to entire banks of

lights or outlets making them ‘Impossibly Smart’ with over-the-Internet monitoring, control, and

advanced programmability.

Full thermostat functions

The High Load Switch provides Internet-connected thermostat functions where a local display

and controls are not needed such as roof or driveway de-icing systems. An included NTC

temperature sensor can be installed on the wall, under floorboards, on the roof, or under

decking allowing accurate monitoring of ambient or radiant floor/roof system temperatures.

Inputs & outputs

It can also be connecting to external switches or systems—such as a light switch or alarm

system, etc.—through a pilot wire to allow direct or pre-programmed control of connected

devices using eight different modes.

Know how much energy you use

Determine how much energy is used by major appliances, entertainment systems, computers,

small appliances, or entire lighting systems by monitoring how much energy has passed

through the HE-HLS01 during any particular day, week, or month.

Makes circuit breakers ‘Impossibly Smart’

Since the High Load Switch can handle up to 16 Amp loads, it is a perfect addition to your

circuit breaker panel for monitoring and controlling groups of devices from the Internet through

a Z-Wave™ gateway.

Safety

The High Load Switch adds safety to your home by protecting against overloads, overheat,

sparks conditions, and it can even be configured to turn off an outlet if a family member leaves

a high load device turned on for a long period of time, possibly preventing a fire.

Enables scenarios triggered by time

The High Load Switch has an onboard Real Time Clock (RTC) that enables scenarios where

connected devices can be triggered on a schedule.

Based on the latest Z-Wave platform

The HE-HLS01 integrates a Z-Wave Plus™ v2 700 platform module allowing it to be used with

Z-Wave home automation systems. The HE-HLS01 supports Z-Wave ‘S0’ and ‘S2’ security

protocols, SmartStart technology, and can be connected (associated) to other Z-Wave

devices, such as relays, motor controllers, dimmers, etc.

HE-HLS01 USER MANUAL 5

TECHNICAL SPECIFICATIONS

▪Dimensions: 50mm (H) х 50mm (W) х

26mm (D)

▪Materials: Flame retardant plastic

▪LED indicator for device status

▪Operating temperature: 0°C to +50°C

▪Power supply: 85-265VAC

50Hz/60Hz, 24-48VDC

▪Power consumption: 1W

▪Active elements: Electromagnetic

Relay Switch

▪Maximum resistive load: 16А, 4000W

@ 250VAC

▪HELTUN Advanced Zero-Cross relay

switching technology

▪Relay lifetime: 100.000 switches

▪External floor temperature sensor

NTC 10kΩ

Measurement range: -20°C to

+100°C

Accuracy: ±0.5°C

▪Device control

Through Z-Wave network

Directly with pilot wire

▪Real-time energy consumption meter

▪IP class: IP21

▪Z-Wave Plus V2 SDK: V7.11

▪Z-Wave module: ZGM130S

▪Can be mounted to flush electrical

junction box:

▪round, square or rectangular type –min.

depth 40

FUNCTIONS & FEATURES

The functions and features of HE-HLS01 could be different depending on how the device is

included in Z-Wave network. Depending on the number of button presses (two or four) during

the inclusion process HE-HLS01 could function as either “Binary Switch” or “Thermostat”.

In case if the device is already included in Z-Wave network and there is a need to change the

device type, it should be removed from network and re-included with the corresponding type.

COMMON FOR “BINARY SWITCH” AND “THERMOSTAT” DEVICE TYPES

▪Options for Inclusion/Exclusion

to/from Z-Wave network

Non-Secure

S0 Secure

S2 Unauthorized, S2 Authorized

with Key

▪Association control of devices in z-

wave network

▪8 safety functions:

Overheat protection &

notification

Temperature Rise protection &

notification

Over-current protection &

notification

Over-load protection &

notification

Over-voltage protection &

notification

Voltage drop protection &

notification

Spark & Surge protection &

notification

Device Failure notification

▪External control input

▪Periodic measurements from:

External temperature sensor

Energy consumption meter

▪Can be used with different NTC-sensors

(range: 1kΩ to 100kΩ)

▪Calibration of External NTC

Temperature Sensor

▪Zero-cross relay switching

▪NO/NC relay mode

▪LED indicator blinking function (for easy

identification among other Z-Wave

devices)

▪Real-time and cumulative energy usage

to 0.1kW accuracy

▪Factory reset function

▪SmartStart technology for quick addition

to Z-Wave networks

▪Encrypted OTA (Over The Air) firmware

update feature

▪Z-Wave Frequency change

HE-HLS01 USER MANUAL 6

“BINARY SWITCH” DEVICE TYPE

▪Auto On/Off function

Switch output Off if there is no

consumption

Switch output On when the load

is reconnected

▪Time limit for high load

▪Timer mode for relay control

▪10 scenarios for relay control

“THERMOSTAT” DEVICE TYPE

▪6 operational modes with individual

temperature set points:

Heat –Most comfort mode

Auto –Time schedule mode

Dry –Fast floor drying mode

Energy Saving –Power efficient

mode

Away –Vacation mode

Off –Thermostat Off (IDLE)

mode

▪4-time schedules for 7 days of the

week:

Morning

Day

Evening

Night

▪Additional safety function:

Load Failure notification

▪Can be used with different NTC-

sensors (range: 1kΩ to 100kΩ)

▪Temperature set intervals: 1.0°C to

110.0°C

▪Temperature scale selection (Celsius

or Fahrenheit)

▪Temperature hysteresis selection

range: 0.2°C to 10.0°C

INSTALLATION

The HELTUN HE-HLS01 High Load Switch must be installed by a licensed electrician in a

manner that conforms to local regulations and building codes. Provide these instructions to

the licensed electrician who is installing the HE-HLS01.

WARNING: ELECTRICAL POWER MUST BE SWITCHED OFF DURING INSTALLATION.

1. FIRST ENSURE THE POWER IS OFF at the main circuit breaker, and then test the wires

with a probe or multimeter to verify.

2. Insert the power and load wires to the correct HE-HLS01 terminals by inserting a small

Phillips-head screwdriver in the slot beneath each terminal and unscrew to open.

HE-HLS01 USER MANUAL 7

Follow connection diagrams 1 (or 2 or 3 or 4) and the instructions below:

▪Power wires: for AC power (85-265VAC) connect Line & Neutral lead wires to L & N

terminals labeled “IN”. For DC power (24-48VDC) connect “+” wire to terminal N and

“–” wire to terminal L.

▪Load wires: connect Line & Neutral wires to L & N terminals labeled with “heating

element” graphic

≡Note: it is possible to connect Neutral wire from load directly to your neutral line

(Connection diagrams 2 or 4).

≡Note: HELTUN recommends installing cord terminals (electric wire ferrules) on the

ends of wires before connecting them to the HE-HLS01 outputs (various colors

terminals are included).

≡Note: Zero-Cross technology is unavailable if the device is DC (24-48VDC) powered.

Tighten wires using Phillips screwdriver in slot beneath each wire.

Connection diagram 1

Connection diagram 2

3. If using the HE-HLS01 for radiant floor heating, connect the NTC temperature sensor wire to

the terminals labeled “NTC.” A 10 kΩ NTC sensor is included inside the HE-HLS01

packaging, but any NTC sensor can be used.

≡Note: If an NTC sensor other than 10 kΩ is used, you must change the sensor resistance

value in Parameter 10.

4. If you will be using an external device to select modes for the HE-HLS01 (such as a security

system or wall switch), connect wires from the external device’s dry contacts to the two HE-

HLS01 terminals labeled “S1” & “Sx”.

Two different connection methods for external control are possible:

▪Connect S1 to Sx through dry contact switch (Connection diagrams 1 or 2)

▪Connect S1 to electric network Line through dry contact switch (Connection diagrams 3

or 4)

≡Note: In case of using “Connection Diagram 3 or 4”, it is MANDATORY to connect S1

terminal to the same wire connected to terminal N on the device (labeled as “IN”)

through dry contacts of an external device (like wall switch).

HE-HLS01 USER MANUAL 8

Connection diagram 3

Connection diagram 4

5. Switch On the main power at the circuit breaker. The HE-HLS01 will start up with the

original default factory settings and the LED indicator will blink red slowly meaning the

device is excluded from a Z-Wave network.

DISASSEMBLY

1. ENSURE POWER IS SWITCHED OFF at the main circuit breaker AND THE LED

INDICATOR IS OFF.

2. Disconnect the wires by inserting a small Phillips-head screwdriver into the slot beneath

each wire and unscrewing to release.

FACTORY RESET

To reset the HE-HLS01 to factory defaults, press and hold the service button for six seconds.

If successful, the LED indicator will blink white for two seconds then the device will reboot.

The factory reset will change all the Parameters to their original factory default values and will

also Exclude the device from any Z-Wave network.

≡Note: Please use this procedure only when the network primary controller is missing

or otherwise inoperable.

Z-WAVE NETWORK

The HE-HLS01 may be operated in any Z-Wave network with other Z-Wave-certified devices

from other manufacturers. The HELTUN HE-HLS01 will act as a ‘repeater’ (i.e. ‘range

extender’) for other devices regardless of manufacturer or brand to increase the reliability of

the overall network.

HE-HLS01 USER MANUAL 9

Adding to Z-Wave network

To add the HE-HLS01 to an existing Z-Wave network (i.e. “inclusion”), do the following:

1. Ensure the HE-HLS01 is Powered On and the LED indicator blinks red slowly (i.e. it is

excluded).

2. Start the Inclusion Mode from the gateway/controller.

3. To start the inclusion process on the HE-HLS01:

a) if you want to use the device as a “Binary Switch”, double-press the service button on

the device (with no more than a one-second interval between presses).

b) if you want to use the device as a “Thermostat”, press four times the service button

on the device (with no more than a one-second interval between presses).

4. The LED indicator will blink green quickly.

5. If the inclusion has been successful, the LED indicator will turn green for three seconds

then continue slowly blinking green while the HE-HLS01 device type is “Binary Switch”

and turn blue for three seconds then continue slowly blinking blue while the device type

is “Thermostat”.

6. If the inclusion was not successful, the LED indicator will turn red for three seconds then

continue slowly blinking red continuously while the HE-HLS01 is Powered On. In that case

repeat the inclusion process (2-5) above

HE-HLS01 USER MANUAL 10

Removing from Z-Wave network

To remove the HE-HLS01 from a Z-Wave network (i.e. “Exclusion”), do the following:

1. Ensure the HE-HLS01 is Powered On and the LED indicator blinks green or blue slowly

(i.e. it is included in a Z-Wave network).

2. Start the Exclusion Mode from the gateway/controller.

3. To start the exclusion process on the HE-HLS01, double-press the service button on the

device (with no more than a one-second interval between presses).

4. The LED indicator will blink red quickly.

5. If the exclusion has been successful, LED indicator will turn red for three seconds then

continue slowly blinking red continuously while the HE-HLS01 is Powered On.

6. If the exclusion was not successful, the LED indicator will turn green or blue for three

seconds then continue slowly blinking green or blue continuously while the HE-HLS01 is

Powered On. In that case repeat the exclusion process (2-5) above.

Note: If the HE-HLS01 has previously been part of a Z-Wave network and not Excluded since

(the LED indicator blinks green or blue slowly), Inclusion is not possible without first performing

an Exclusion or Factory Reset procedure.

Security

S0, S2 unauthorized, and S2 authorized Inclusion Modes are supported. If you use the S2

authorized Inclusion Mode, the security key should be used during the inclusion process.

Security key is the first 5 digits of DSK (device DSK is printed on the rear of the device plus

on the Security Card included in the packaging, see Figures 2 & 3).

≡Note: Be sure to save this key. Without the key, it is impossible to perform an inclusion

in S2 authorized mode.

SmartStart

SmartStart-enabled products can be added to a Z-Wave network by scanning the Z-Wave QR

Code shown on the product (see Figures 1 & 3) with gateways/controllers that provide for

SmartStart inclusion. In this case, no further action will be required and the SmartStart product

will be added automatically within ten minutes of being turned on in the vicinity of a network.

To add the HE-HLS01 to the Z-Wave network using SmartStart:

1. Input the High Load Switch DSK to the controller’s Node Provisioning List (or scan the QR

code)

2. Power on the device.

3. Wait for the adding process to complete.

4. Successful adding will be confirmed by a message on the Z-Wave controller and the LED

indicator on HE-HLS01 will turn green for three seconds then continue to slowly blink

green continuously while the device is Powered On.

≡Note: The device QR code and DSK are printed on the front and rear of the HE-

HLS01 plus on the additional Security Card included in the packaging (see Figures 1,

2 & 3).

Autres manuels pour HE-HLS01

Table des matières

Autres manuels Heltun Changer

Heltun

Heltun HE-HLS01 Manuel utilisateur

Heltun

Heltun HE-TPS02 Manuel utilisateur

Heltun

Heltun HE-HLS01 Manuel utilisateur

Heltun

Heltun QUINTO HE-TPS05 Manuel utilisateur

Heltun

Heltun QUINTO HE-RS01 Manuel utilisateur

Heltun

Heltun HE-TPS01 Manuel utilisateur

Heltun

Heltun HE-TPS01 Manuel utilisateur

Heltun

Heltun QUINTO HE-RS01 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur