Gram GX Series Manuel utilisateur
SERIES / SERIE / SÉRIE / SERIE
GX
6000 / 15K / 30K
OPERATION MANUAL
MANUAL DE UTILIZACION
MANUEL D´UTILISATION
BENUTZERHANDBUCH
DE
2
INDEX English
Technical characteristics 5
Front keypad 6
backside display 6
Messages 7
Installation 7
Turn-on / Turn-off the balance 8
Reset to zero 8
Tare function 8
Stand-by function 9
State of battery indicators 9
Battery recharging 9
Parameters setup 9
Auto-zero range setting 9
Filter setting 10
Select weighing unit 10
Limits setup 10
Auto-turn-off 11
Buzzer 11
Resolution setup (d) 11
On range setup (on-ra) 12
Displays setup (d-dp) 12
Counting pieces mode 12
Limits indicators 13
Calibration 13
Maintenance 14
Guarantee 15
2
3
ÍNDICE Español
Características técnicas 16
Teclado frontal 17
Visor trasero 17
Mensajes del display 18
Instalación 18
Conectar / desconectar la balanza 19
Puesta a cero 19
Función de tara 20
Función ahorro de energía 20
Indicadores del estado de la bateria 20
Recarga de la batería 20
Ajuste de parámetros 20
Ajuste del rango de auto-cero 21
Cambio de filtro 21
Cambio de unidad de pesada 21
Ajuste de límites de peso 21
Auto-apagado 22
Zumbador 22
Cambio de resolución (d) 23
Rango de arranque 23
Displays (d-dp) 23
Modo cuentapiezas 23
Indicadores de límites 24
Calibración 25
Consejos de mantenimiento 26
Garantía 27
4
SOMMAIRE Français
Caracteristiques techniques 28
Clavier frontal 29
Viseur arrière 29
Messages du display 30
Instalation 30
Connecter et déconnecter la balance 31
Mise à zéro 31
Fonction de Tare 32
Fonction economie d´energie 32
Idicateurs de l’etat de la batterie 32
Charger la batterie 32
Ajustement des parametres 32
Ajustement du rang de zéro automatique 33
Changement du filtre 33
Changement d´unité 33
Ajustement des limites de poids 33
Arrêt automatique 34
Signal sonore 34
Changer de résolution (d) 34
Rang de démarrage (on-ra) 35
Displays (d-dp) 35
Mode compte-pièces 35
Indicateurs de limites 36
Calibrage 37
Conseils pour l´entretien 38
Garantie 39
5
INHALT Deutsch
Technische Eigenschaften 41
Beschreibung der Tastatur und des Displays 42
Meldungen auf dem Display 42
Displaynachrichten 43
Installation 43
Einschalten/Ausschalten der Waage 44
Nulljustierung 44
Tara-Funktion 45
Energiesparfunktion 45
Anzeige des Akkustands 45
Aufladen des Akkus 45
Einstellung der Parameter 45
Automatischer Nullstellungsbereich 46
Änderung des Filters 46
Änderung der Wiegeeinheit 46
Wiegen mit Toleranzbereich 47
Automatische Abschaltung (AOFF) 47
Akustischer Signalton 47
Änderung der Ablesbarkeit (d) 48
Einschaltbereich (on-ra) 48
Displays setup (d-dp) 48
Funktion Stückzählen 49
Ermittlung des Referenzgewichts 49
Anzeige der Grenzwerte 49
Kalibrierung 50
Wartungsanleitung 51
Garantie 52
6
ENGLISH
TECHNICAL CHARACTERISTICS
Model GX-6000 GX-15K GX-30K
Maximal capacity 6kg 15kg 30kg
Minimal capacity 20e
Readability 0.5g 1g 2g
Tare range 100% maximum capacity
Precision III
Operating temperature -5~+35ºC
Storage temperature -25~+50ºC
Power 6V / 4Ah rechargeable battery and
AC/Adaptor
Dimensions 232 x 284 x 95 mm
Pan size 225 x 186 mm
Net weight 3,75 kg
7
FRONT KEYPAD
To turn on the balance and reset to zero the reading´s display.
Tare function, to subtract the weight of a container.
Access to calibration function.
To turn off the balance.
To setup parameters and data introduction.
BACKSIDE DISPLAY
8
MESSAGES
dc x.xx Shows the current battery voltage “ x.xx V”
- - - - - - It means that the weight placed on the weighing pan exceeds the
maximum capacity, the balance will beep, you must immediately
remove the weight from the weighing pan.
-AdC- Means that the digital analogic converter (A/D) values, have
been exceeded, the balance will beep.
-Lo- Indicates that battery voltage is lower than 5.8V. You can go
on using the balance for a while , but you should charge it
immediately.
C_End Indicates that the battery charging is completed.
Err-1 Battery voltage is lower than 5.6V. The balance will automatically
turn offafter this message is shown. Connect the AC/Adaptor
and charge it.
Err-2 Weight adjustment error.
INSTALLATION
Level the balance, turning on the adjustable feet located at the bottom of the
scale, so that the bubble remains in the centre of the circle.
9
TURN ON / TURN OFF THE BALANCE
Turn on
Press the key , the balance will beep. The display will show the version
number, the voltage level of battery and it will perform a self-checking 9, 8, 7,
,1,0, finally the display will show the value zero “0”, now the balance is ready
for weighing.
Turn off.
Keep pressed the key for few seconds to turn off the balance.
Auto Turn off
After 10 minutes without using the balance, it will automatically turn off.
Turn off for low voltage
When the voltage is less than 5.6V, the display will show the message Err-1
and the balance will turn off.
RESET TO ZERO
When there are no objects placed on the pan and display doesn´t indicate
“0”, press the key to correct the deviation, now the display reads “0”.
TARE FUNCTION
Place a container on the weighing pan, press the key , the display will
show zero again and Tare symbol will light on. Put the product inside the
10
container, the display will show its net weight. When the container is removed,
the display will show a negative value and Tare symbol will disappear.
STAND-BY FUNCTION
After 40 seconds of no use, the balance will go into power saving mode
(stand-by) and the display will show “0”.
STATE OF BATTERY INDICATORS
“High” means that voltage is higher than 6.3V.
“Mid” means that voltage is between 6V and 6.3V.
“Low” means that voltage is lower to 6V.
BATTERY RECHARGING
The internal rechargeable battery is off. When the display shows “-Lo-“, turn
off the balance and recharge it immediatelly. The time needed to charge the
battery at 100% is 12 hours.
PARAMETERS SETUP
Press the key for 3 seconds, the display will show “range”, continuously
pressing the key , will be displayed the following functions: range\ Units
\ A-oFF \ FILt \ Zero \ Buzzer \ d \ on-ra \ d-dp.
Auto-zero range setting
Press the key for 3 seconds until the displays shows the message
“range”, press again the key until “2Ero” message is displayed. Press
the key , the display will show the current zero range, press the key
Ce manuel convient aux modèles suivants
3
Table des matières
Langues :
Autres manuels Gram Échelle
Gram
Gram RS Series Manuel utilisateur
Gram
Gram AHV Series Manuel utilisateur
Gram
Gram C3 Series Manuel utilisateur
Gram
Gram K3iX Series Manuel utilisateur
Gram
Gram RZ Series Manuel utilisateur
Gram
Gram Xtrem F Manuel utilisateur
Gram
Gram SBZ-600 Manuel utilisateur
Gram
Gram K3X Series Manuel utilisateur
Gram
Gram FH 100 Manuel utilisateur
Gram
Gram CR-30 Manuel utilisateur
Gram
Gram FC Series Manuel utilisateur
Gram
Gram S5i SERIES Manuel utilisateur
Gram
Gram CM-3 Manuel utilisateur
Gram
Gram C9 Series Manuel utilisateur
Gram
Gram GEC Series Manuel utilisateur
Gram
Gram SILK Q Manuel utilisateur
Gram
Gram SPX 600D Manuel utilisateur
Gram
Gram EH 500 Manuel utilisateur
Gram
Gram AHV Series Manuel utilisateur
Gram
Gram AH series Manuel utilisateur
