Gram K3 SERIES Manuel utilisateur

SERIES

K3 / K3P / K3i / K3i Printer

MK3 / MK3 Printer

S3/ S5i / TCamel 2T

OPERATION MANUAL

INDEX English

Warning 4

Features 4

Options 6

Package contents 6

Assembly 6

Display description 7

Touch pad description 8

Connections 9

Platform 1 connection 10

RS-232 10

Unit reset 11

Using the tare 11

Normal Tare 11

Fixed tare 12

Stored Tare Values 12

Using the TARE memory 13

Auto-tare Function 14

Activating the function 14

Using the function 15

Regular weighing 15

Weight sum total 16

Individual counter function 17

Sampling 17

Counting 18

Individual weight counter 19

Weight test (Control +/-) 20

Memorising weight limits and response mode 21

Warning Mode selection 22

Selecting Warning Mode 22

Activating the Limit (+/-) function 23

Product code (Item) 24

Manual function 24

Scanner function 26

Advanced functions 26

Activating the display’s light 26

Hold Last Weight Value (Auto Hold) 27

Auto-Off function 28

Auto Tare 28

Activate the Auto Tare function 28

Using the Auto Tare 29

Zero Memory (memory slots) 29

Stability Filter 30

Sound activation 31

Activate auxiliary measuring units 31

Blocking the Touchpad 32

A/D converter check function 32

Internal test 33

RS-232C Data output configuration 33

Printing format 35

Guarantee

ENGLISH

WARNING

• Unplug the power supply before installing or disconnecting the unit.

• Before using the device, make sure the voltage indicated on the

nameplate corresponds to your network’s voltage. If it doesn’t do not

plug the device into the electrical network.

• Before using the device, make sure the power cord is not obstructed or

bent. It must be free of any tension.

• This precision scale must be used only in the environmental conditions

specified in this user manual.

• This device should not be used in explosion hazard areas or in other

unstable environments.

• Do not place the scale close to any source of heat or under direct sun

light.

• Keep the scale away from other electromagnetic radiation sources. This

may affect the precision of the dial’s reading.

• When the low battery warning appears the battery must be recharged as

soon as possible. A battery left uncharged for extended periods of time

may get damaged and stop functioning.

• When changing the battery, make sure that the (+) and (-) poles are

properly connected to the corresponding positions.

FEATURES

• Large liquid crystal display with backlit illumination in selectable colour.

• Menu with colour indicators when activating a function.

• Cross shaped touchpad for an intuitive use of the menu.

• 4 weighing units.

• Liquid and dust IP-67 protection.

• Hermetic cell connectors, feed and options.

• Reversible panel display allows placing the device on a table or on the

wall without requiring any additional parts (except for the k3i model,

which needs wall support).

• Regular and fixed tare.

• Memory for 20 numerical weight tares.

• Memory for 20 weight limits to control +/-.

• Memory for 100 products for the part counter.

• Imprint of 3 heading lines with four different selectable font sizes.

• Imprint of 2 bottom lines with four different selectable font sizes.

• Memorisable article codes for printing 6 alpha-numeric characters.

• Imprint of batch number in tickets available.

• Imprint in Spanish, English, French and German.

• Imprint of total ticket amount (selectable).

• 10 step linear calibration and selectable gravity adjustment.

• High/OK/Low Authentication Function with 3 lights and audio indication.

• Network adapter with a 3.5m cable.

• Automatic unplugging (adjustable).

• Rechargeable battery (optional in K3T Series).

• RS-232 PC and printer data outlet (optional in K3T Series).

OPTIONS

• External tare input (pedal or switch).

• Printing out date and time on tickets (optional).

PACKAGE CONTENTS

• 1 Scale.

• 2 weighing platforms (if the entire equipment package is purchased).

• 2 Columns (optional).

• 1 Network adapter 220V/9V.

• 1 User guide.

• Rechargeable battery (optional for K3T).

ASSEMBLY

Place the platform over a flat surface without any objects that might interfere

in the weighing process.

Unblock the platform by removing or loosening the blocking screws. Follow

the instructions in the attached unblocking guide.

Insert the cell cable through the column until it reaches the column’s upper

side.

Place the column (optional) inside the column support and adjust the screws

to block it and fix it.

Place the scale on the top side of the column, adjusting it to the support the

fixing screws.

Insert the power cable to connection “C1”, and the plug it into the power

outlet. Do not use other cables besides the included one as it may damage

the unit’s inner circuits.

Plug the power cable to a 110V or 220V electrical network outlet. It supports

dual voltage supply.

The auto-test will last a couple of seconds afterwards the scale will light up

and show a zero value when you press the button.

The scale is now ready to use. Please read this manual carefully before trying

to adjust the scale.

DISPLAY DESCRIPTION

TOUCH PAD DESCRIPTION

Power on/Power off. Press this button to turn on the scale. When the

scale is on, pressing this button for approximately one second, will

turn off the scale.

Weight Unit change. Press this button to change the weight unit.

In menu mode, it will work as an escape (return to normal mode)

function. By keeping this button pressed for over one second it starts

the part counter mode.

Gross/Net button. When the tare is used, pressing this button will

show the total weight. Pressing it again will show the net weight.

By keeping it pressed for over a second it automatically selects the

“Weight limit” mode.

PLU Button. Press this button to enter the menu, and to have access to

previously stored values of weight limits, part counters, tares and other

useful functions. By keeping this button pressed for over a second, it

enters the factory mode which is only accessible to authorised users

and is password protected.

Zero button. It sets the scale to zero, correcting possible deviations.

The platform must be empty to perform this function. By pressing this

button for over a second, it shows the display test, capacity, division

and software version.

Tare button. Pressing this button once will subtract the weight of any

container located on the platform. It returns to zero automatically once

the container is removed. Pressing this button twice will memorise

the tare weight until the tare button is pressed again. Keeping this

button pressed will give you access to the tare memory.

MR and left arrow. Press this arrow to show the total accumulated

weight. In menu mode, it verifies the selected adjustment value, and

returns to the previous menu.

M+ and right arrow. Press this arrow to have the device memorise the

value shown on the display. It also sends the ticket data in ticket mode

to the printer. In menu mode it shows the next function.

Clock and top arrow. Press this arrow to visualize time and date.

MC and bottom arrow. Press this arrow to erase the stored weighing

memory. In menu mode it decreases the value displayed.

Enter. Confirms the selection made in program mode, and sends current

weight data to the printer (simple mode). By pressing this button for 5

seconds, it will activate the block/unblock function of the touchpad.

CONNECTIONS

AC/DC: Power connections.

Option: Optional.

RS-232: Double RS-232C data and tare output (optional for K3T).

C1: Platform 1 connection

Platform 1 connection

Multipin mobile connector.

Male chassis socket P700 (7-pin).

Load Cell A Load Cell B

PIN 1 SIG - Blue White

PIN 2 SIG + Brown Green

PIN 3 SHIELD Shield Shield

PIN 4 EXC - Black Black

PIN 5 SENSE - - Blue

PIN 6 EXC + Red Red

PIN 7 SENSE + - Yellow

RS-232

Multipin mobile connector.

Male chassis socket P700 (8-pin).

4RxD

5TxD

6GND

Autres manuels pour K3 SERIES

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Gram Échelle

Gram

Gram AH series Manuel utilisateur

Gram

Gram ZFOC Series Manuel utilisateur

Gram

Gram SILK ISLAND Manuel utilisateur

Gram

Gram ACUREX TXM Manuel utilisateur

Gram

Gram FC Series Manuel utilisateur

Gram

Gram FH 100 Manuel utilisateur

Gram

Gram D3 Series Manuel utilisateur

Gram

Gram SBZ-600 Manuel utilisateur

Gram

Gram SILK Q Manuel utilisateur

Gram

Gram EK Series Manuel utilisateur

Gram

Gram Xtrem F Manuel utilisateur

Gram

Gram S3 SERIES Manuel utilisateur

Gram

Gram C3 Series Manuel utilisateur

Gram

Gram RZ Series Manuel utilisateur

Gram

Gram AHV Series Manuel utilisateur

Gram

Gram VK Series Manuel utilisateur

Gram

Gram RS Series Manuel utilisateur

Gram

Gram C6 1T Manuel utilisateur

Gram

Gram AC 500 Series Manuel d'installation

Gram

Gram RV-300i Manuel utilisateur

Gram

Gram AHS 300 Manuel utilisateur

Gram

Gram SPX 600D Manuel utilisateur

Gram

Gram C3-1T Manuel utilisateur

Gram

Gram FD 410 SERIES Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur