Gofanco KVMHDExt Manuel utilisateur

HDMI USB KVM CAT5e/6

Extender - 60m

User's Guide

G4-0070A

P/N: KVMHDExt

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals

download, please go to www.gofanco.com/

download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

location to avoid damage from overheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables in/out when

the device is in use to avoid cable damage.

Make sure they are plugged into the correct

ports

• UsetheincludedDC5Vpoweradapteronly.

Makesurethe specification matches if using

3rd-party DC power adapters

Introduction

The HDMI USB KVM CAT5e/6 Extender - 60m

extends HDMI and USB signals up to 60 meters

(197ft) over a single CAT6 cable (50 meters with

CAT5e).

Features

• Supports Full HD 1080p with nearly zero

latency

• KVM extension with 2 USB ports to control

the source device, such as a PC, at a remote

location

• Transmitter(TX)is equipped with an HDMI

output for a local HDMI display

• Power over Cable (PoC) allows one power

adapter to power both the TX & RX units

PackageContents

• Transmitter (TX) unit (1pc)

• Receiver (RX) unit (1pc)

• Power adapter (1pc)

• USB Type-A to Type-A cable (1pc)

• User's guide (1pc)

Product Layout

Figure 1: Transmitter (TX)

1 Reset Button Press to reset the Transmitter (TX) unit

2USBIndicator

Off: No PC connection

Slow flashing: No USB device(s) detected on the RX unit

On/Fast flashing: USB device(s) detected on the RX unit

3 USB Port Connects to the computer's USB port

4 RJ45 Out Connects to the Receiver's RJ45 port using a CAT cable

5 Link LED On: HDMI source signal detected

Flashing: No HDMI source signal detected

6 Power Jack Connects to the included power adapter

7 HDMI IN Connects to an HDMI source

8HDMIOut ConnectstoanHDMIdisplay

Figure 2: Receiver (RX)

1 Reset Button Press to reset the Receiver (RX) unit

2USBIndicator

Off: No power detected or RJ45 not linked properly to

Transmitter (TX)

On/Fast flashing: USB device(s) detected

Slow flashing: No PC connection or no USB device(s) detected

3 USB Port Connects to keyboard or mouse

4 RJ45 In Connects to the Transmitter's RJ45 port using a CAT cable

5 Link LED On: HDMI source signal detected

Flashing: No HDMI source signal detected

6 Power Jack Connects to the included power adapter (optional)

7 HDMI Out Connects to an HDMI display

8 USB Port Connects to keyboard or mouse

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display(s).

2. Connect your HDMI source device to the

Transmitter's HDMI In connector with an

HDMI cable (HDMI cable not included).

3. Connect the Transmitter's USB port to the

PC's USB port using the included USB

Type-A to Type-A cable.

4. Optional: Connect an HDMI display to the

Transmitter's HDMI out connector with an

HDMI cable (HDMI cable not included) for

local monitoring of the HDMI signal.

5. Plug your CAT5e/6 cable between the

Transmitter's RJ45 Output and Receiver's

RJ45 Input.

6. Connect your HDMI display to the

Receiver's HDMI out connector with an

HDMI cable (HDMI cable not included).

7. Plug your keyboard and mouse into the

USB ports of the Receiver (RX) unit.

8. Plug the included power adapter into the

Transmitter's power jack, then plug the

power adapter into a reliable power source.

Note: The Receiver (RX) does not need a

power adapter, it can be powered from the

Transmitter (TX) over CAT cable with PoC

technology.

9. Power on all connected devices.

10. The extender is ready for use.

Application Diagram

CAT Cable Wiring

We suggest both RJ-45 connectors be wired

identically following T568B wiring standard for

the best performance and compatibility

FAQ & Solutions

Q: There is no video output or video is not

normal:

A: 1) Check all cable connections.

2) Press reset button on the Transmitter and

Receiver units.

Q: The Link LED is flashing:

A: 1) Make sure the network cable follows the

IEEE-T568B wiring standard.

2)Check whether TXhasHDMIsignal input.

3) Press the reset button on both TX & RX.

Q: The extender is not working properly:

A: 1) Please check the cable lengths below:

- HDMI cables: Up to 3 meters

- Network cables CAT6: Up to 60m; CAT5e:

Up to 50 meters

2) Press the reset button on the TX/RX and

reconnect.

Q: RX Link LED is on but there is no image:

A: 1) Press RX reset button to reset the unit.

2) Make sure the HDMI cable is firmly

connected to the display.

3) Use a higher quality network cable.

Specifications

HDMI Compliance HDMI 1.3

HDCP Compliance HDCP 1.4

Resolution

720x576p@50Hz, 720x480p@60Hz,

1280x720p@60Hz, 1920x1080p@60Hz,

640x480p@60Hz, 800x600p@60Hz,

1024x768p@60Hz, 1280x800p@60Hz,

1280x1024p@60Hz, 1440x900p@60Hz,

1680x1050p@60Hz

Bandwidth 10.2 Gb/s

Input and Output TMDS

Signal 0.5 - 1.5Vp-p (TMDS)

Input and Output DDC

signal 5Vp-p (TTL)

Transmission Distance CAT5e: 50 meters

CAT6: 60 meters

Power Supply 5VDC / 2A

Power Consumption TX: 2W

RX: <2W

Operating Temperature 0 - 60 C

Storage Temperature -10 - 70 C

Humidity 0 - 90%

Table des matières

Autres manuels gofanco Extenseur

gofanco

gofanco KVMHDExt4K Manuel utilisateur

gofanco

gofanco HDbitT8P Manuel utilisateur

gofanco

gofanco HDBaseT-HD20 Manuel utilisateur

gofanco

gofanco HDMIExt2 Manuel utilisateur

gofanco

gofanco HDwireless1x4 Manuel utilisateur

gofanco

gofanco HDbitTPro Manuel utilisateur

gofanco

gofanco HDMIExt Manuel utilisateur

gofanco

gofanco HD20Ext4P-LT Manuel utilisateur

gofanco

gofanco 4K120 Manuel utilisateur

gofanco

gofanco Prophecy PRO-HDExtIP-TX Manuel utilisateur

gofanco

gofanco HD14Ext Manuel utilisateur

gofanco

gofanco HDBaseT Manuel utilisateur

gofanco

gofanco HDwireless150 Manuel utilisateur

gofanco

gofanco HD20Ext-Cas Manuel utilisateur

gofanco

gofanco HD14Ext1xN Manuel utilisateur

gofanco

gofanco HDExtCoax Manuel utilisateur

gofanco

gofanco HDEXT120ESD Manuel utilisateur

gofanco

gofanco HDWirelessKVM Manuel utilisateur

gofanco

gofanco HDwireless200 Manuel utilisateur

gofanco

gofanco CAT5E Manuel utilisateur

gofanco

gofanco HDMIExt8P Manuel utilisateur

gofanco

gofanco HD14Ext-EDID Manuel utilisateur

gofanco

gofanco HDbaseT-HDR Manuel utilisateur

gofanco

gofanco HD20wireless Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

gofanco KVMHDExt Manuel utilisateur

Manuels Extenseur populaires d'autres marques